OPTIMIZATION OF TECHNOLOGY FOR OBTAINING SAPROPEL FERTILIZER UNDER ULTRASONIC CONDITIONS
https://doi.org/10.53360/2788-7995-2025-2(18)-61
Abstract
The production of sapropel fertilizer is a multi-stage process, which requires taking into account the influence of various parameters on the yield of the final product. In this regard, it became necessary to optimize the modes of obtaining sapropel product from bottom sediments of eutrophic lakes. Using ultrasonic exposure in the technology of sapropel production, which consists in extracting bottom sediments with water, separating, filtering and concentrating the finished product. The analysis of the effect of the extraction duration, mixing rate, temperature and mass ratio of the phases of the bottom suspension on the concentration of the solution was carried out. It is proved that the use of ultrasonic cavitation at the extraction stage increases the yield of the sapropel product by 1.7 times. The derived mathematical models of the processes of obtaining a sapropel product under cavitation and in the absence of it allow us to determine the optimal input parameters to ensure maximum yield of the sapropel product. From a practical point of view, this will positively affect the quality of the resulting innovative environmentally friendly sapropel fertilizer. In turn, this will manifest itself in greater efficiency of pre-sowing seed treatment, by increasing the qualitative and quantitative properties of the nutrients contained in sapropel fertilizer. This will subsequently affect higher crop yields.
About the Authors
P. S. DmitriyevKazakhstan
Pavel Stanislavovich Dmitriyev* – Candidate of Biological Sciences, Associate Professor, Professor
of the Department of Geography and Ecology,
86 Pushkin Street, Petropavlovsk, 150000
I. A. Fomin
Kazakhstan
Ivan Aleksandrovich Fomin – Master of Natural Sciences, Senior Lecturer of the Department of
Geography and Ecology,
86 Pushkin Street, Petropavlovsk, 150000
I. N. Kataeva
Kazakhstan
Irina Nikolaevna Kataeva – master’s student of the Department of Geography and Ecology,
86 Pushkin Street, Petropavlovsk, 150000
I. A. Zuban
Kazakhstan
Ivan Aleksandrovich Zuban – Master of Natural Sciences, Senior Lecturer of the Department of Biology,
86 Pushkin Street, Petropavlovsk, 150000
T. R. Nakiev
Kazakhstan
Talgat Rashitovich Nakiev – Master of Technical Sciences, senior lecturer of the Department of
Chemistry and Chemical Technologies,
86 Pushkin Street, Petropavlovsk, 150000
References
1. Deryagina, M.S. & Konyukhova, O.M. (2023). Determination of Humic Acid Content in Sapropel. BIO Web of Conferences. 57. http://dx.doi.org/10.1051/bioconf/20235706002 (In English)
2. Pavlovska, I.; Klavina, A.; Auce, A.; Vanadzins, I.; Silova, A.; Komarovska, L.; Silamikele, B.; Dobkevica, L.; Paegle, L. Assessment of sapropel use for pharmaceutical products according to legislation, pollution parameters, and concentration of biologically active substances. Sci. Rep. 2020, 10, 21527. https://doi.org/10.1038/s41598-020-78498-6 (In English)
3. Khilchevskyi, V.; Ilyin, L.; Pasichnyk, M.; Zabokrytska, M.; Ilyina, O. (2022). Hydrography, hydrochemistry and composition of sapropel of Shatsk Lakes. Journal of Water and Land Development. 54 (VII-IX). 184-193. http://dx.doi.org/10.24425/jwld.2022.141571 (In English)
4. Hadartsev, A.; Platonov, V.; Fridzon, K. Chemical composition and biological activity of sapropel in the Orenburg region (V. Sol-Iletsk), genetic link with the composition of the sapropel formers. J of New Med. Technologies. eJournal. 2014, 8. 1-8. http://dx.doi.org/10.12737/5040 (In English)
5. Dmitriev P.S., Ostrovnoj K.A.*, Fomin I.A., Zuban' I.A. Osobennosti himicheskogo sostava i polucheniya sapropelya evtrofnyh ozer Severo-Kazahstanskoj oblasti. Vestnik Universiteta SHakarim. 2024, №2 (14) 2024, 519-527. DOI: 10.53360/2788-7995-2024-2(14)-62 (In Russian)
6. Dmitriev P.S., Fomin I.A., Zuban' I.A., Ostrovnoj K.A. «Sposob polucheniya sapropelevogo produkta dlya predposevnoj obrabotki semyan ovoshchnyh kul'tur» RGP «Nacional'nyj institut intellektual'noj sobstvennosti». Patent № 8929. (21) 2023/1145.2 (22) 18.11.2023 (45) 22.11.2024 (54) www.kazpatent.kz. «Gosudarstvennyj reestr poleznyh modelej Respubliki Kazahstan» (In Russian)
7. Dmitriyev, P.; Fomin, I.; Ismagulova, S.; Berdenov, Z.; Zuban, I.; Ostrovnoy, K.; Golodova, I. Study of the Possibility of Using the Bottom Organomineral Accumulations of the Lakes of the North Kazakhstan Region to Obtain Innovative Fertilizers for the Development of Organic Farming and Agrotourism, Sustainability 2023, 15, 8999. https://doi.org/10.3390/su15118999 (In English)
8. Fedotkin, I.M. Kavitaciya, kavitacionnaya tekhnika i tekhnologiya, ih ispol'zovanie v promyshlennosti. CH. II / I.M. Fedotkin, I.S. Gulyj. – Kiev: OKO, 2000. – 898 s. (In Russian)
9. Viten'ko, T.N. Massoobmen pri rastvorenii tverdyh tel s ispol'zovaniem gidrodinamicheskih kavitacionnyh ustrojstv // Teor. osnovy him. tekhnologii. – 2006. – T. 40, № 6. – S. 639 – 644. (In Russian)
10. Promtov, M.A. Pul'sacionnye apparaty rotornogo tipa: teoriya i praktika / M.A. Promtov. – M.: Mashinostroenie - 1, - 2001. – 260 s. (In Russian)
11. Rozenberg L.D. Fizicheskie osnovy ul'trazvukovoj tekhnologii» / L.D. Rozenberg. – M.: Nauka, 1969. – 689 s. (In Russian)
12. Nigmatov A. N., Nazarova G. N. Matematicheskoe modelirovanie v ekologii // Evrazijskij Soyuz Uchenyh. 2018. №3-2 (48). URL: https://cyberleninka.ru/article/n/matematicheskoe-modelirovanie-v-ekologii (In Russian)
13. SHemelova O. V. Matematicheskoe modelirovanie v processah himicheskoj tekhnologii // Byulleten' nauki i praktiki. 2018. №12. URL: https://cyberleninka.ru/article/n/matematicheskoe-modelirovanie-v-protsessah-himicheskoy-tehnologii (In Russian)
14. Hanberdieva B., Allanazarova G., Satdyev B. Matematicheskie modeli v himicheskoj inzhenenrii: peredovye tekhnologii i primenenie // Vestnik nauki. 2024. №4 (73). URL: https://cyberleninka.ru/article/n/matematicheskie-modeli-v-himicheskoy-inzhenerii-peredovye-tehnologii-i-primenenie (In Russian)
15. Gumerov, A. M. Matematicheskoe modelirovanie himiko-tekhnologicheskih processov: uchebnoe posobie / A. M. Gumerov. - 2-e izd., pererab. - Sankt-Peterburg : Lan', 2014. -176 s. - ISBN 978-5-8114-1533-5. - Tekst: elektronnyj // Lan': elektronno-bibliotechnaya sistema. — URL: https://e.lanbook.com/book/41014 (In Russian)
16. Ahtyamov E.K., SHammazov A. M., Gusejnova S.N., SHemyakov A. O. Matematicheskoe modelirovanie v himiko-tekhnologicheskih processah i podgotovke inzhenerov: istoriya i sovremennost' // Istoriya i pedagogika estestvoznaniya. 2021. №1-2. URL: https://cyberleninka.ru/article/n/matematicheskoe-modelirovanie-v-himiko-tehnologicheskih-protsessah-i-podgotovke-inzhenerov-istoriya-i-sovremennost (In Russian)
17. Dmitriyev, P.; Fomin, I.; Ismagulova, S.; Berdenov, Z.; Zuban,
18. I.; Ostrovnoy, K.; Jemaledinova, I.; Golodova, I. Effect of the use of sapropel extract on biometric indicators and yield of beetroot (Beta vulgaris L.) in the conditions of the North Kazakhstan region. Sustainability 2024, 16, (14), 6192. https://doi.org/10.3390/su16146192 (In English)
19. Dmitriyev, P.; Bykov, A.; Zuban, I.; Fomin, I.; Ismagulova, S.; Ostrovnoy, K.; Jemaledinova, I. The Possibility of Environmentally Sustainable Yield and Quality Management of Spring Wheat (Triticum aestivum L.) of the Cornetto Variety When Using Sapropel Extract. Sustainability 2024, 16, 9870. https://doi.org/10.3390/su16229870 (In English)
Review
For citations:
Dmitriyev P.S., Fomin I.A., Kataeva I.N., Zuban I.A., Nakiev T.R. OPTIMIZATION OF TECHNOLOGY FOR OBTAINING SAPROPEL FERTILIZER UNDER ULTRASONIC CONDITIONS. Bulletin of Shakarim University. Technical Sciences. 2025;(2(18)):502-510. (In Russ.) https://doi.org/10.53360/2788-7995-2025-2(18)-61