Preview

Bulletin of Shakarim University. Technical Sciences

Advanced search

DEVELOPMENT OF A SYSTEM FOR MEASURING THE TEMPERATURE OF A DRYING UNIT FOR MONITORING THE DRYING PROCESS OF KURT

https://doi.org/10.53360/2788-7995-2025-1(17)-12

Abstract

The aim of the work is to develop a temperature measurement system using DS18B20 and prepare for further study of the drying process of kurt, checking the operability of the connection to the Arduino Nano controller. Nine sensors of this system will allow in the future to conduct an experiment and collect information about the temperature inside the kurt in real time during the drying process, which will confirm the reliability of the sensor unit and the drying unit for kurt as a whole. Installation of the sensor and controller was successful, which confirms the first results of idle measurement and monitoring of all temperature sensors using the Terminal 1,9b program. The temperature range of the sensors is calculated from -55°C to + 125°C, which makes it suitable for operation in a wide range of industrial conditions. The results of the study have practical value for subsequent experiments on drying kurt and other food products, as well as for monitoring the process of food products in real time. This installation method can be applied to other food equipment. They can contribute to the optimization of the drying process by monitoring the drying process, which is an important factor for the efficiency of control and improving the quality of the product. 

About the Authors

E. Agzam
Shakarim University of Semey
Kazakhstan

Erkhan Agzam – doctoral student of the department «Technological equipment and mechanical engineering»

071412, Semey, Glinka St., 20A



R. Kussainov
Shakarim University of Semey
Kazakhstan

Rinat Kussainov – Senior Lecturer, Department of Physical and Mathematical Sciences and Informatics

071412, Semey, Glinka St., 20A



A. Kakimov
Shakarim University of Semey
Kazakhstan

Aitbek Kakimov – Doctor of Technical Sciences, Professor of the Department of Technological Equipment and Mechanical Engineering

071412, Semey, Glinka St., 20A



A. Yerengaliyev
Shakarim University of Semey
Kazakhstan

Amangeldy Yerengaliyev – Candidate of Technical Sciences, Professor of the Department of Technological Equipment and Mechanical Engineering

071412, Semey, Glinka St., 20A



N. Ibragimov
Shakarim University of Semey
Kazakhstan

Nadir Ibragimov – Candidate of Technical Sciences, teacher of the Department of Technological Equipment and Mechanical Engineering

071412, Semey, Glinka St., 20A



References

1. Lykov A.V. Teoriya sushki / A.V. Lykov. – Moskva: Ehnergiya, 1968. – 472 s. (In Russian).

2. Kupriyanov B.V. Tekhnologicheskie izmereniya i KIP v pishchevoi promyshlennosti / B.V. Kupriyanova. – Moskva: Pishchevaya promyshlennost',1977 – 275 s. (In Russian).

3. Ginzburg A.S. Osnovy teorii i tekhniki sushki pishchevykh produktov / A.S. Ginzburg. – Moskva: Pishchevaya promyshlennost',1973. – 526 s. (In Russian).

4. Vybor optimal'nogo oborudovaniya pri sushke kurta / E.M. Aғzam i dr. // Vestnik Universiteta Shakarima. Seriya tekhnicheskie nauki. – 2024. – № 2(14). – S. 66-73. https://doi.org/10.53360/2788-7995-2024-2(14)-9. (In Russian).

5. Razrabotka sushil'noi ustanovki dlya proizvodstva kurta / E.M. Aғzam i dr. // Vestnik Universiteta Shakarima. Seriya tekhnicheskie nauki. – 2024. – № 3(15). – S. 104-110. https://doi.org/10.53360/2788-7995-2024-3(15)-16. (In Russian).

6. Issledovanie pishchevoi bezopasnosti natsional'nogo produkta «kurT», vyrabatyvaemogo na predpriyatiyakh vostochno-kazakhstanskoi oblasti / SH.K. Zhakupbekova i dr. // Vestnik Almatinskogo tekhnologicheskogo universiteta. – 2022. – № 4. – S. 146-152. https://doi.org/10.48184/2304-568X-2022-4-146-152. (In Russian).

7. Sokolov V.I. Osnovy rascheta i konstruirovaniya mashin i apparatov pishchevykh proizvodstv / V.I. Sokolov. – Moskva: Kolos, 1992. – 395 s. (In Russian).

8. Ginzburg A.S. Tekhnologiya sushki pishchevykh produktov / A.S. Ginzburg. – Moskva: Pishchevaya promyshlennost',1977 – 248 s. (In Russian).

9. Fedorov V.G. Planirovanie i realizatsiya ehksperimentov v pishchevoi promyshlennosti / V.G. Fedorov, A.K. Pleskonos. – Moskva: Pishchevaya promyshlennost', 1980. – 171 s. (In Russian).

10. A Working Prototype Using DS18B20 Temperature Sensor and Arduino for Health Monitoring / S. Rameshaha et al // SN COMPUT. SCI. – 2021. – № 2. – R. 33. https://doi.org/10.1007/s42979020-00434-2. (In English).

11. Elyounsi A. Evaluating Suitability of a DS18B20 Temperature Sensor for Use in an Accurate Air Temperature Distribution Measurement Network / A. Elyounsi, A.N. Kalashnikov // Engineering Proceedings. – 2021. – № 10(1). – R. 56. https://doi.org/10.3390/ecsa-8-11277. (In English).

12. Xiong F. Wireless temperature sensor network based on DS18B20, CC2420, MCU AT89S52 / F. Xiong // 2015 IEEE International Conference on Communication Software and Networks (ICCSN), Chengdu, China. – 2015. – R. 294-298. https://doi.org/10.1109/ICCSN.2015.7296172. (In English).

13. Development of NCAM Temperature and Humidity Sensor / O.A. Ogunjirin et al // International Journal of Science and Research. (IJSR). – 2019. – Vol. 9, Issue 12. – R. 101-106. (In English).

14. Design of Dodol Mixer on Based on Microcontroller Arduino Nano / Ch. Saputraa et al // Journal of Applied Business and Technology. Journal of Applied Business andTechnology (JABT). – 2024. – 5(1). – 23-31. (In English).

15. Lebedev N.V. Printsipy avtomatizatsii upravleniya priemoperedayushchim kanalom i polucheniya dannykh vvoda-vyvoda na baze programmiruemykh mikrokontrollerov STM32 / N.V. Lebedev, V.V. Kucheruk // Uspekhi sovremennoi nauki. – 2017. – Tom 7, № 3. (In Russian).


Review

For citations:


Agzam E., Kussainov R., Kakimov A., Yerengaliyev A., Ibragimov N. DEVELOPMENT OF A SYSTEM FOR MEASURING THE TEMPERATURE OF A DRYING UNIT FOR MONITORING THE DRYING PROCESS OF KURT. Bulletin of Shakarim University. Technical Sciences. 2025;(1(17)):93-100. (In Russ.) https://doi.org/10.53360/2788-7995-2025-1(17)-12

Views: 67


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 2788-7995 (Print)
ISSN 3006-0524 (Online)
X