ANALYSING THE EFFICIENCY OF USING POROUS METALS IN HEAT EXCHANGERS
https://doi.org/10.53360/2788-7995-2024-3(15)-37
Abstract
This study focuses on analysing the effectiveness of porous metals in heat exchangers, focusing on their effect on improving heat transfer processes. Porous metals, due to their unique structure, have high thermal conductivity and increased contact surface area, which contributes to more efficient heat transfer. As part of the study, experiments and theoretical analyses were carried out to evaluate the effect of porosity coefficient on heat exchange performance. The plotted dependence of Freon mass flow rate and heat quantity on porosity coefficient demonstrate the linear nature of these dependencies. Mathematical processing of the data showed that an increase in the porosity coefficient leads to an increase in both the amount of heat transferred by Freon and Freon mass flow rate, indicating an increase in heat exchange efficiency. The results confirmed that porous metals can significantly improve the performance of heat exchangers and energy saving. Based on the study, further investigation and implementation of porous metals in heat exchangers is recommended to optimise their performance and improve the overall system efficiency. These results open new perspectives for the application of porous metals in various industries including power and mechanical engineering.
About the Authors
T. M. UmyrzhanKazakhstan
Temirlan Nurlanuly Umyrzhan – doctoral student of the educational programme 8D05302 - «Technical Physics» of the Department of «Technical Physics and Heat Power Engineering»,
071412, Semey city, Glinka Street, 20 A
N. N. Umyrzhan
Kazakhstan
Nurzhan Nurlanuly Umyrzhan – master's student of the Department of «Technical Physics and Heat Power Engineering»,
071412, Semey city, Glinka Street, 20 A
A. N. Shalaganov
Kazakhstan
Almagul Nygmetovna Shalaganova – senior lecturer, Department of «Technical Physics and Heat Power Engineering»,
071412, Semey city, Glinka Street, 20 A
A. S. Kuzkenov
Kazakhstan
Almas Salakidenovich Kuzkenov – head of CHPP-1,
070000, Semey city, Auezov Avenue, 111
S. L. Elistratov
Russian Federation
Sergey Lvovich Elistratov – doctor of technical sciences, professor of the Department of «Heat Power Plants»,
630073, Novosibirsk, 20 Marx Avenue, building 1, room.10
References
1. Primenenie poristykh materialov v teploobmennykh apparatakh sistemy teplosnabzheniya / N.V. Rydalina i dr. // Izvestiya vysshikh uchebnykh zavedenii. Problemy ehnergetiki. – 2020. – T. 22, № 3. – S. 3-13. https://doi.org/10.30724/1998-9903-2020-22-3-3-13. (In Russian).
2. Patent US. № 3394756. Porous plate condenser / John L., James F., Richard P. – 05.01.1976. Available at: http://www.freepatentsonline.com/3394756.pdf html. Accessed to: 20 avg 2019. (In English).
3. Osipov S.N. Ehnergoehffektivnye malogabaritnye teploobmenniki iz poristykh teploprovodnykh materialov / S.N. Osipov, A.V. Zakharenko // Ehnergetika. Izv. vyssh. ucheb. zavedenii i ehnerg. ob"edinenii SNG. – 2018. – T. 61, № 4. – S. 346-358. https://doi.org/10.21122/1029-7448-2018-61- 4-346-358. (In Russian).
4. Stepanov O.A. Ispol'zovanie poristykh metallov dlya povysheniya ehffektivnosti teploobmennykh apparatov v teploehnergetike / O.A. Stepanov, N.V. Rydalina // Proizvodstvennye tekhnologii budushchego: ot sozdaniya k vnedreniyu: Materialy IV Mezhd. nauchno-praktich. konf., Komsomol'sk-na-Amure, 16-26 fevralya 2021 goda / Redkollegiya: S.I. Sukhorukov (otv. red.), A.S. Gudim, N.N. Lyubushkina. – Komsomol'sk-na-Amure: Komsomol'skii-na-Amure gosudarstvennyi universitet, 2021. – S. 147-151. (In Russian).
5. Rydalina N.V. Ehksperimental'noe issledovanie poristykh metallov v teploobmennikakh / N.V. Rydalina, O.A. Stepanov, E.A. Antonova // Nauka i innovatsii XXI veka: Sb. st. po materialam VI Vserossiiskoi konf. molodykh uchenykh, Surgut, 27 sentyabrya 2019 goda. Tom II. – Surgut: Surgutskii gosudarstvennyi universitet, 2020. – S. 96-100. (In Russian).
6. Nikolenko K.V. Konstruktivnye osobennosti rekuperativnykh teploobmennikov na baze poristykh ehlementov / K.V. Nikolenko, A.V. Nikolenko, V.V. Kursin // Fundamental'nye i prikladnye nauchnye issledovaniya: aktual'nye voprosy, dostizheniya i innovatsii: sbornik statei LXV Mezhdunarodnoi nauchno-prakticheskoi konferentsii, Penza, 15 iyunya 2023 goda. – Penza: Nauka i Prosveshchenie (IP Gulyaev G.YU.), 2023. – S. 40-42. (In Russian).
7. Rydalina N.V. Metod rascheta teploobmennykh apparatov s poristymi vstavkami / N.V. Rydalina // Transformatsiya neftegazovogo kompleksa 2030: Sbornik materialov X shkoly-seminara molodykh uchenykh po teplofizike i mekhanike mnogofaznykh sistem, Tyumen', 23-25 maya 2023 goda. – Tyumen': Tyumenskii gosudarstvennyi universitet, 2023. – S. 60-61. (In Russian).
8. Computational study of heat transfer enhancement using porous foams with phase change materials: A comparative review / E. Hamidi et al. // Renewable and Sustainable Energy Reviews. – 2023. – T. 176. – R. 113196. (In English).
9. A critical review on phase change materials (PCM) based heat exchanger: different hybrid techniques for the enhancement / H. Togun et al // Journal of Energy Storage. – 2024. – T. 79. – R. 109840. (In English).
10. Patel A. Heat Exchanger Materials and Coatings: Innovations for improved heat transfer and durability / A. Patel // International Journal of Engineering Research and Applications (IJERA). – 2023. – T. 13. – № 9. – R. 131-42. (In English).
Review
For citations:
Umyrzhan T.M., Umyrzhan N.N., Shalaganov A.N., Kuzkenov A.S., Elistratov S.L. ANALYSING THE EFFICIENCY OF USING POROUS METALS IN HEAT EXCHANGERS. Bulletin of Shakarim University. Technical Sciences. 2024;(3(15)):277-282. (In Russ.) https://doi.org/10.53360/2788-7995-2024-3(15)-37