4-санға «Автоматтандыру және ақпараттық технологиялар», «Азық-түлік инженериясы және биотехнология», сондай-ақ «Химиялық технология» бағыттары бойынша мақалалар қабылдау жабылды.

Приём статей в четвёртый номер по направлениям «Автоматизация и информационные технологии», «Пищевая инженерия и биотехнология», а также «Химическая технология» закрыт.

Submissions for the fourth issue in the fields of Automation and Information Technology, Food Engineering and Biotechnology, as well as Chemical Technology, are now closed.

Preview

Bulletin of Shakarim University. Technical Sciences

Advanced search
No 3(23) (2026)
View or download the full issue PDF (Russian)

AUTOMATION AND INFORMATION TECHNOLOGY (ORIGINAL ARTICLE)

6-15 17
Abstract

This study develops a gradient-velocity method for analyzing the aperiodic robust stability of linear control systems under parametric uncertainty. The proposed approach extends classical Lyapunovbased stability theory by incorporating velocity characteristics of state variables into the analysis, which enables a more detailed description of system dynamics. Unlike traditional matrix Lyapunov methods and linear matrix inequality (LMI) techniques, the method formulates stability conditions in the form of explicit systems of inequalities derived from vector Lyapunov functions, thereby reducing conservatism and improving interpretability. The developed approach makes it possible to determine admissible parameter regions that guarantee monotonic convergence of state trajectories to the equilibrium point without oscillatory behavior or overshoot. Stability criteria are established for both single-input single-output (SISO) and multi-input multioutput (MIMO) systems, ensuring applicability to a wide class of control problems. The obtained conditions define a class of linear control systems characterized by robust performance and strictly aperiodic transient processes across the entire domain of parameter uncertainty.
Numerical simulations of second – and third-order systems confirm the theoretical findings and demonstrate the effectiveness of the proposed method. The results show consistent monotonic decay of state variables and improved transient response characteristics. Overall, the method provides a practical analytical tool for robust control design and expands the geometric interpretation of Lyapunov’s direct method.

15-22 20
Abstract

This paper is devoted to the asymptotic and formal analysis of the computational complexity of NonInteractive Zero-Knowledge Proofs (NIZK). Non-interactive zero-knowledge proofs enable a prover to convince a verifier of the validity of a given statement without revealing any additional information and are widely applied in distributed information systems.
In this study, NIZK schemes are considered within the Common Reference String (CRS) model. The evaluation of computational complexity is based on the time complexity of the proving and verification algorithms, the witness size, and the proof length. Algorithmic efficiency is analyzed within the framework of the polynomial-time computational model.
The analysis shows that the computational complexity of the proving algorithm significantly depends on the witness size, whereas the complexity of the verification algorithm is mainly determined by the proof length. Additionally, asymptotic bounds on proof size and their impact on communication costs are examined.
The obtained results provide a theoretical foundation for the comparative analysis of non-interactive zeroknowledge proofs and for the development of computationally efficient cryptographic protocols.

23-30 21
Abstract

This study presents a systematic comparative analysis of the effectiveness of classical machine learning algorithms and modern deep learning architectures for automatic cyberbullying detection in multilingual online texts (Russian and Kazakh). Particular attention is given to the comparison of traditional feature-based approaches (TF-IDF, n-grams) and models utilizing contextual text representations. For the Kazakh-language corpus, a specialized dataset was developed and manually annotated to ensure high-quality labeling under low-resource language conditions and limited training data availability.
Experimental results showed that the attention-based model achieved the best performance on the Russian-language corpus, reaching an Accuracy of 92.1%, an F1-score of 92.9%, and a ROC-AUC of 0.95. The same architecture also demonstrated the highest results on the Kazakh-language corpus, achieving an Accuracy of 91.5%, an F1-score of 92.9%, and a ROC-AUC of 0.94. Recurrent neural network models, including LSTM and BiLSTM, showed stable performance within the range of 90-91%, whereas classical machine learning algorithms yielded lower results across all major evaluation metrics. These findings confirm the effectiveness of deep learning approaches for cyberbullying detection in multilingual textual environments.
The study highlights the importance of integrating multimodal and interpretable approaches, expanding linguistic resources, and applying transfer learning along with pre-trained language models to improve robustness and classification accuracy. The obtained results have practical significance for intelligent content moderation systems, digital safety applications, and the early detection of psychological risk factors among users in online environments.

31-42 16
Abstract

In a Global Navigation Satellite System (GNSS) communication channel under weak-signal conditions, accurate tracking of the receiver carrier phase and frequency degrades sharply, reducing the stability and overall quality of the navigation solution. The purpose of this work is to improve weak GNSS signal quality, i.e., to increase the sensitivity of the carrier automatic control (tracking) system under low-quality signals and dynamic impacts and to reduce phase/frequency errors. The research object is the baseband I/Q signal at the output of the GNSS receiver correlator and the operation of the carrier tracking loop. The proposed method replaces conventional long coherent integration with block coherent integration (BCI). The total integration time T is preserved, the signal is divided into BBB short blocks, and a matrix Z[k] is formed from the block results Ib , Qb. This matrix preserves amplitude-phase variations and more accurately characterizes the effects of frequency mismatch and dynamics. Next, a neural-network discriminator (CNN+MLP) that processes Z[k] estimates the phase error; the error is then filtered by a PI-type loop filter and, in closed feedback, updates the parameters of the numerically controlled oscillator (NCO). The novelty of the approach lies in representing BCI information as a 2D matrix, replacing the classical phase-locked loop discriminator with a neural discriminator in a closed BCI-NPLL architecture, and providing a quantitative sensitivity justification via the CRLB-phase jitter relationship. Simulation results show that the proposed approach maintains tracking stability in the weaksignal region, the phase error is concentrated around zero, and the frequency estimation accuracy is high (RMSE≈0.084 Hz). Consequently, the method improves weak GNSS signal quality and increases receiver tracking robustness.

42-53 19
Abstract

This study addresses the problem of automating the processing of terminological data using ontology-oriented methods of natural language processing. Modern information systems increasingly operate with heterogeneous and poorly structured terms presented in the form of lists or textual descriptions, which complicates their normalization, comparison, and subsequent automatic classification. This problem is particularly relevant in biomedical informatics, where phenotypic descriptions of hereditary diseases require standardized representation for integration into intelligent information systems.
The paper proposes an ontology-aware NLP algorithm aimed at the normalization of terms and their automatic distribution into a fixed set of semantic groups based on an ontological model. The approach combines methods for entity extraction and normalization, ontological linking, and taxonomic classification, enabling the generation of a formalized and reproducible representation of terminological data. As the semantic basis, the specialized PNGO ontology (Phenotype-based Normalized Group Ontology) is used, implemented in OWL 2 format and defining a fixed set of 23 phenotypic groups anchored to the Human Phenotype Ontology (HPO) hierarchy.
The proposed approach provides a deterministic and interpretable alternative to machine and deep learning methods, ensuring reproducibility and semantic consistency of results without requiring a training stage on annotated data. The effectiveness of the solution is confirmed by experimental evaluation on five hereditary diseases comprising 53 phenotype terms, where the algorithm achieved a macro-average F1-score of 0.919. The resulting structured profile is suitable for integration into information systems, analytical modules, and reproducible computational pipelines.

54-62 18
Abstract

Survey instruments remain the most practical approach for large-scale monitoring of student stress in educational settings, and the Perceived Stress Scale (PSS) continues to be validated across contexts. This study evaluates how modern, off-the-shelf machine-learning methods perform on a tabular, multi-class student survey with pronounced class imbalance. We conduct a two-stage evaluation. First, we benchmark Decision Tree (DT), Random Forest (RF), and k-Nearest Neighbors (KNN) across five train-test regimes (90/10, 80/20, 70/30, 60/40, 50/50) to probe stability under different sample sizes. Second, we add an imbalance-aware experiment on an 80/20 split using SMOTE-style oversampling, and compare RF, Gradient Boosting (GB), and XGBoost (XGB). We report macro-averaged metrics suited for skewed multi-class targets. Across the five-split benchmark, RF and KNN are consistently stronger than a single DT. These outcomes align with recent evidence that tree-based ensembles dominate on typical tabular data and with reports that ensembles are reliable for stress-related classification. On the 80/20 split, RF and XGBoost tie at macro-F1 ≈ 0.73, while an additional SVM (RBF) reaches the best macro-F1 of 0.86. Clustering and projections confirm that stress responses form a continuum rather than discrete groups.

62-73 20
Abstract

In post-quantum cryptography, the focus is on the design of algorithms capable of withstanding threats posed by quantum computers, which requires the adoption of new approaches to constructing their internal architecture. Significant attention in this field is devoted to digital signatures, as they provide authentication and integrity protection for data in digital environments. One of the most promising directions is considered to be hash-based digital signature schemes. They are characterized by high efficiency and proven cryptographic security, which makes them one of the key post-quantum solutions for electronic signatures. This paper presents a comparison of the main components, as well as the sizes of private keys, public keys, and signatures (in bytes), for several SPHINCS and SPHINCS+-based schemes, including the TANBA-SPHINCS+ scheme, a new variant of SPHINCS+. This scheme employs a cryptographic hash function based on a modified Sponge construction with multiple internal functions. The proposed approach extends the classical SPHINCS+ architecture and allows flexible configuration of internal transformations. Such a design increases the structural diversity of the algorithm and may contribute to improved resistance against certain types of cryptanalytic attacks. For experimental evaluation, a software implementation was developed. The paper also presents comparative experimental performance results.

73-82 15
Abstract

Kazakh Sign Language (KSL) remains underrepresented in current sign language processing research due to a lack of large, annotated datasets and specialized computational tools. This paper presents a deep learning-based framework for phrase-level recognition of sign language using visual keypoint sequences, in which each recognized phrase is mapped to its gloss label and a verified reference translation in Russian. The approach employs the FluentSigners-50 dataset as a benchmark corpus and extracts pose and hand landmarks from video data using the MediaPipe Holistic model. A two-layer bidirectional long shortterm memory (BiLSTM) network is trained on the resulting spatiotemporal sequences to classify forty distinct KSL phrases. The model takes as input a fixed-length sequence of 150 frames, each containing 225 keypoint features, and outputs a predicted phrase class through a multilayer perceptron. Experimental results demonstrate strong performance in phrase classification, with accurate mappings from video to gloss labels and their corresponding Russian translations, achieving an accuracy of 94.73%. Rather than performing openvocabulary machine translation, the system addresses closed-set phrase classification with gloss and reference-translation lookup, making it suitable for structured assistive and training applications in sign language learning environments.

83-90 24
Abstract

This paper proposes and formalizes a hybrid architecture for controlling a fleet of mobile robots. The centralized MAPF/CBS layer generates a consistent discrete motion plan, while the decentralized ROS2/Nav2 layer ensures continuous execution and local adaptation in a Gazebo environment. Unlike fully centralized schemes, which are sensitive to increasing computational complexity and execution deviations, as well as the Nav2-only mode, which lacks a global mechanism for preventing inter-robot conflicts, the proposed architecture introduces an intermediate Fleet Manager. This module converts the discrete plan into a sequence of waypoint commands, monitors progress, detects delays, and initiates replanning when motion conditions are violated. A mathematical formulation of the problem on a graph G=(V,E) is formulated, conflict constraints on vertices and edges, makespan and sum-of-costs target criteria are specified, and an Ackermann-type kinematic model is presented for continuous execution. Experimental verification was performed at two levels: in a discrete MAPF/CBS model and in the ROS2/Gazebo/Nav2 simulation environment. For the R1 reference mode, it was shown that as the number of agents on map A increases from N=1 to N=8, the planning time increases from 0.095823 to 15.709505 s, the SOC increases from 3 to 40, and the makespan increases from 2 to 4 cycles. The obtained results confirm the need for a hybrid transfer of a centralized plan to a locally adaptive implementation and define a reproducible framework for assessing the scalability, robustness, and conflict tolerance of a multi-robot system.

91-105 14
Abstract

This paper examines the problems of linguistic modeling and process control for high-quality coke production in a fuzzy environment using a decision support system and proposes approaches to addressing them. A method for synthesizing linguistic models of complex process systems with fuzzy input and output parameters is proposed, drawing on expert knowledge and the Fuzzy Logic Toolbox application in MATLAB. Using the proposed method as a fuzzy inference system, linguistic models were synthesized to evaluate coke yield and its quality indicators during delayed coking. Membership functions for the input and output parameters of the delayed coking process and 3D input-output surfaces are constructed, enabling analysis and decision-making on the management of high-quality coke production. An intelligent decision support system was created based on the linguistic models synthesized in this paper, models of a distillation column for a delayed coking unit developed and published by the authors, and a heuristic method for solving decisionmaking problems. The main interfaces of the developed decision support system, implementing modeling and decision-making processes for the effective management of the coke production process, are presented and described. The novelty and advantage of the obtained results lies in their ability to model and optimize the delayed coking process and manage the quality of the produced coke in a fuzzy environment. The practical significance of the research results lies in their ability to quickly and effectively manage the coke production process in real-world conditions characterized by uncertainty and ambiguity of the initial information.

106-115 21
Abstract

This paper addresses the fuel consumption optimization problem for a BKZ-320-140 PT drum steam boiler burning Ekibastuz coal with working ash content Aʳ up to 47%. A three-stage lexicographic linear programming problem is proposed for the sequential minimization of fuel consumption, excess oxygen downstream of the superheater, and excess superheated steam production. The problem is solved in MATLAB using the linprog function and the dual-simplex algorithm, based on an incremental linear regression model of the steam generation process. Technological inequality constraints are imposed on the operating parameters: superheated steam temperature (540-555 °C), oxygen content (≥ 4.8%), and steam output (260-340 t/h). Permissible parameter ranges are determined from statistical processing of 1276 hourly records of the CHP-2 Astana boiler unit for September-October 2023. The results show that fuel consumption is reduced by 0.331 t/h without additional capital expenditures, yielding annual savings of 21.1 million KZT. As an additional outcome, abrasive fly ash carryover through convective heating surfaces is reduced by 134 kg/h, or approximately 1005 tonnes per heating season, significantly lowering the environmental burden. The proposed method can be adapted for other drum boilers and integrated into a real-time automated mode control system, making it suitable for practical industrial application.

115-127 20
Abstract

The article discusses the issues of mathematical modeling and optimization of the modes of operation of pumping stations of the second rise in conditions of variable water consumption of urban water supply systems. The relevance of the study is due to the need to increase energy efficiency, reduce water losses and ensure the stability of hydraulic parameters in conditions of uneven consumer demand. The Smychka water intake in Semey was chosen as the object of the study. A dynamic mathematical model of the water supply system has been developed, including a second-lift pumping station, clean water and chlorination tanks, a pipeline network, a water consumption model, and a digital twin of the facility. To improve the accuracy of the assessment of the system's condition, a Kalman filter was used, and water consumption forecasting was implemented based on the LSTM neural network. An intelligent control architecture based on advisory modelpredictive control (Advisory MPC) is proposed, integrated with the existing PLC/SCADA infrastructure without interfering with existing automation circuits. The effectiveness of the developed approach has been investigated in three operational scenarios: nominal mode, peak water consumption mode and emergency overload. The simulation results showed an increase in the stability of the system, a reduction in energy consumption by 20-30%, a reduction in the number of pump switches and an improvement in the quality of pressure maintenance. The results obtained confirm the prospects of using digital twins and predictive management for the modernization of existing water supply systems.

127-138 15
Abstract

The article presents the hardware and software architecture of a multi-channel measurement module designed for synchronous data acquisition, hardware signal processing, and digital data transmission. The proposed architecture is based on eight AD9226 analog-to-digital converters and a Xilinx Spartan-6 XC6SLX9 field-programmable gate array (FPGA), which provides synchronous data acquisition, digital frame generation, and data transmission via a two-wire DATA-CLK interface. A frame-based data transmission protocol has been developed to ensure frame sequence control, automatic synchronization recovery in the event of transmission errors, and system scalability. A prototype of the eight-channel measurement module was developed and experimentally evaluated. The experimental results confirmed the correctness of synchronous signal acquisition, the reliability of data transmission, and the proper operation of the FPGA algorithms and the dedicated software. The obtained results demonstrate the feasibility of applying the proposed architecture to the development of scalable multi-channel data acquisition systems for digital signal processing.

138-147 18
Abstract

This paper presents an analysis of modern mathematical models describing the growth of Chlorella vulgaris in closed photobioreactors used for the study, prediction, and control of microalgae cultivation processes. The main classes of models are considered, including empirical and kinetic growth models, light attenuation and light distribution models, photoacclimation models, and comprehensive dynamic models that account for the combined effects of light intensity, carbon dioxide concentration, CO₂ mass transfer, pH level, temperature, mixing conditions, and other technological factors. Particular attention is paid to evaluating the accuracy, computational complexity, and practical applicability of these models for automated control, culture monitoring, and process optimization. The possibilities of integrating mathematical models with optimal control methods, Model Predictive Control (MPC), and modern metaheuristic optimization algorithms are analyzed. A critical assessment of the advantages and limitations of existing approaches is performed, including issues related to parameter identification and model scaling from laboratory-scale systems to industrial photobioreactors. The analysis demonstrates that the use of comprehensive dynamic models combined with intelligent automated control systems can improve biomass productivity, process stability, reduce energy consumption, and enhance the overall efficiency of industrial Chlorella vulgaris cultivation. The results of this study can be applied to the development and improvement of advanced automated control systems for photobioreactors.

148-156 14
Abstract

The development of critical thinking skills has become a central priority in contemporary education, especially in preparing students for complex problem-solving, informed decision-making, and lifelong learning. This paper presents the design and initial deployment of an AI-powered educational tool aimed at fostering critical thinking among secondary school students. The application leverages natural language processing and machine learning to analyze literary or instructional texts and generate questions aligned with Bloom’s Taxonomy, encompassing all cognitive levels – from basic recall to analysis, evaluation, and creative synthesis.
The system enables educators or learners to upload any text-based content, upon which the AI automatically generates structured, level-specific questions tailored to the material. An integrated scoring and feedback mechanism supports formative assessment and encourages self-regulated learning. Pilot testing has been initiated in a middle school setting with a focus group of students aged 11-13. Baseline data collection is currently underway to enable future comparative analysis and evaluation of the tool’s impact on critical thinking development.

156-167 15
Abstract

This paper presents a study of the power consumption of a modular navigation seal used in cargo transportation monitoring systems. Limited autonomous operating time is one of the operational factors that affects the reliability of cargo control. The aim of this work was to develop a test bench and to quantitatively evaluate the contribution of individual modules to the total power consumption of the device. The obtained data can subsequently be used to adjust power management algorithms.
A test bench based on INA219 current and voltage sensors and a Raspberry Pi Pico microcontroller was developed for the study. The test bench provided automatic recording and storage of measurement data. During the experiments, the power consumption of the SIM800C GSM module, MAX-8Q GPS module, HC-09 Bluetooth module, RC522 NFC module, central microcontroller, and AHT20 sensor was evaluated in active and sleep modes. The average current and autonomous operating time with a 3500 mAh battery were calculated taking into account cyclic device activation and data transmission.
The results showed that the total current consumption was approximately 272 mA in active mode and 2.8 mA in sleep mode. With device activation every 15 minutes, the estimated autonomous operating time reached 16.6 days, which indicates the effectiveness of the selected power-saving modes.
The developed test bench made it possible to obtain reproducible data on the power consumption of individual navigation seal modules. The results can be used to configure the operating modes of GSM, GPS, Bluetooth, and NFC modules, as well as sensors, and to improve the energy efficiency of devices used in logistics monitoring.

168–179 20
Abstract

The article presents the development of a web-based information system for the digital documentation of historical sites in the city of Semey. The relevance of the study is associated with the need to move from scattered and locally stored information towards a unified digital environment in which data on historical and cultural heritage sites can be structured, searched, updated and visually presented. The object of the research is the process of recording and presenting information about historical sites in digital form, while the subject of the research includes the methods and software tools used to store and process such information. The study applied domain analysis, data modelling, database design, modular programming and functional testing. As a result, a digital site record structure was developed, covering identification, classification, spatial, historical-descriptive, visual and system data. Based on this structure, the architecture of the web application and the logical database model were designed, and a software prototype was implemented using Python, Flask, SQLite, HTML, CSS and JavaScript. GIS integration and QR-based identification are considered as directions for further development and are supported at the level of the proposed data structure rather than as completed functional modules. The scientific value of the work lies in the proposed structural and functional model for the digital documentation of historical sites, adapted to the local urban context. Its practical value is related to the possible use of the system in education, museums, archives, local history work and the further development of the digital infrastructure for Semey’s historical and cultural heritage.

179-189 20
Abstract

Modeling distributed systems for water supply automation and dispatching is aimed at addressing the current problem of water scarcity, ensuring timely prevention of emergency situations, enabling their early prediction, and reducing dispatcher workload through the use of modern sensors and digital devices.
The purpose of this work is to preliminarily evaluate how the system will function before its actual implementation, optimize it, and reduce associated risks.
The scientific paper examines the gain coefficient for water pressure using an oscillatory element and a first-order aperiodic element, and also provides a comparative analysis for the parameters k = 5 and T. In addition, simulation modeling and parametric analysis methods were applied, and the dynamic characteristics of the system were evaluated using an interpolation method based on the transfer function.
The research results make it possible to propose engineering solutions for stabilizing water pressure, improving system reliability, reducing hydraulic losses on upper floors, and ensuring efficient control of the water supply system. The proposed approach provides a basis for saving resources, reducing accident risk, improving control quality, and increasing the efficiency of automating water distribution processes in multistorey residential buildings. This method also helps to accurately determine system parameters prior to practical implementation.

189-195 12
Abstract

This paper details a mathematical model and a performance evaluation of FALCON-M, a novel, lightweight post-quantum signature scheme specifically engineered for Internet of Things (IoT) applications. The importance of this contribution is underscored by the imperative to secure IoT devices from future quantum attacks, a challenge not adequately met by existing standards like Falcon and Dilithium, which are too demanding for resource-constrained settings owing to their use of rejection sampling and floating-point computations. Our study seeks to close the gap between theoretical post-quantum cryptographic solutions and their feasible integration into embedded systems.
The proposed scheme is based on a lattice-based signature defined over the ring 𝑅𝑞 = ℤ𝑞[𝑥]/(𝑥𝑛 + 1) with parameters 𝑛 = 512, 𝑞 = 12289, 𝜎 = 4.0, 𝜏 = 60. A key feature is the complete absence of rejection sampling, which guarantees deterministic execution time and inherent resistance to timing side-channel attacks.
Analysis reveals that the scheme achieves notably small key sizes: the public key is 928 bytes, the secret key is 256 bytes, and the signature is 973 bytes. Projections for performance on an ARM Cortex-M4 processor operating at 100 MHz indicate a signing duration of 7.4 ms. This speed is comparable to established post-quantum cryptography methods, yet it provides superior resilience against side-channel vulnerabilities.
The primary scientific advancement is the creation of a mathematically rigorous model that avoids the shortcomings of existing approaches. Its practical importance is demonstrated by its applicability to a broad spectrum of Internet of Things devices, including intelligent sensors, implanted medical devices, and industrial control systems.

196-205 19
Abstract

This paper presents a real-time driver state monitoring model based on classical computer vision techniques. The primary objective of the study is to develop an algorithm for detecting fatigue, drowsiness, and reduced attention by analyzing facial features, eye state, and head pose. The proposed system employs Haar Cascade classifiers for face and eye detection, Dlib facial landmark detection for extracting facial feature points, and the Eye Aspect Ratio (EAR) metric for estimating eye openness and detecting prolonged eye closure. In addition, head orientation and tilt are analyzed as supplementary indicators of reduced attention and fatigue-related states. The algorithm was implemented using the OpenCV library and the Python programming language and evaluated on an Android-based mobile device. Experimental studies were conducted using approximately three hours of video recordings collected under different lighting conditions, head orientations, and with participants wearing glasses. Experimental results showed that the proposed system processes the video stream at an average speed of 28 frames per second and can detect prolonged eye closure and other fatigue-related indicators in real time. The use of classical computer vision methods provides low computational complexity and enables implementation on mobile devices with limited hardware resources. The obtained results demonstrate the practical applicability of the proposed approach for real-time driver state monitoring. The developed model can serve as a basis for driver assistance systems, intelligent transportation systems, and other safety-oriented applications.

205-216 22
Abstract

Trajectory forecasting is a critical component of autonomous transport systems because it supports conflict assessment and safe motion planning in dynamic road environments. This study proposes a hybrid forecasting architecture that combines adaptive graph-based modeling of local agent interactions with a transformer module that encodes the global scene context. The model was evaluated on the Argoverse 2 Motion Forecasting and Waymo Open Motion Dataset benchmarks using ADE, FDE, Miss Rate, minADE, and minFDE, together with analyses of robustness, interaction density, and inference time. On Argoverse 2, the proposed model reduced ADE from 1.21 to 1.17, FDE from 2.81 to 2.69, and Miss Rate from 0.25 to 0.23 compared with Motion Transformer. On Waymo, the improvement was smaller but consistent: ADE decreased from 1.58 to 1.53 and FDE from 3.82 to 3.69. The largest gain was observed in high-density interaction scenes, where ADE decreased from 1.52 to 1.45. These results indicate that adaptive interaction weighting improves forecasting robustness in complex multi-agent road scenarios, although it increases computational cost.

216-227 20
Abstract

The development of artificial intelligence (AI) technologies in the railway industry directly depends on the availability of high-quality and representative public datasets. This article provides a systematic analysis of open datasets used for the tasks of rail defect detection, contact network diagnostics, rolling stock monitoring and railway infrastructure safety. The analysis was conducted following the PRISMA methodology: the search covered IEEE Xplore, Scopus and Web of Science, as well as the Kaggle, GitHub and Zenodo repositories. In total, 30 key publications and 13 open datasets were analysed and classified by sensor type (RGB, LiDAR, vibration, multi-sensor), machine learning task (detection, segmentation, classification), data volume and annotation format. The analysis shows that most datasets are based on RGB images, while the share of multimodal datasets is gradually increasing. Key limitations of existing datasets were identified -small sample size, class imbalance, limited geographical variability and the absence of unified benchmark protocols and directions for further research were defined. The results highlight the need to create large multimodal datasets and to develop unified standards for the annotation and evaluation of AI models.

227-235 18
Abstract

This study quantifies institutional heterogeneity in digital engagement and academic outcomes using anonymized data from Kazakhstani schools, comprising records from two EdTech platforms (Twig-bilim.kz, BilimLand.kz) and entry diagnostic test scores. Applying one-way ANOVA/intraclass correlation (ICC) decomposition and random-intercept mixed-effects modeling, we find that school membership explains 8.8-9.8% of variance in digital platform engagement and 30.0-30.7% of variance in entry test scores, with close numerical agreement between the ANOVA-based variance shares and the mixed-effects ICC estimates. These estimates indicate non-negligible school-level heterogeneity, particularly for entry diagnostic-test scores. The findings indicate that pooled, school-agnostic machine learning models risk systematically miscalibrated predictions for students in schools that deviate from the national average, and argue for schoolaware calibration in the design of AI-based early-warning and adaptive-learning systems intended to support flexible and equitable access to education. The results are discussed in relation to Kazakhstan's ongoing school digitalization initiatives and to the broader literature on algorithmic fairness in education.

236-248 21
Abstract

Pose-based exercise recognition provides a computationally efficient approach for analyzing human movement; however, classification based solely on the current pose may fail to capture shortterm motion context. This study investigates whether leakage-free causal context can improve exercise-phase recognition without requiring a complex temporal neural architecture. A time-series exercise dataset containing 1,372 ordered pose observations from five exercises and ten exercise-phase classes was analyzed using seven pose representations derived from body landmarks, joint angles, and spatial distances. To reduce the risk of optimistic evaluation caused by neighboring observations appearing across training and testing partitions, a contiguous block-aware validation protocol was employed. A leakage-free causal mean context representation was constructed using only the current and preceding observations, without future samples or ground-truth labels. History-length ablation showed that a five-observation causal history achieved the best performance. The proposed representation increased mean Macro-F1 from 0.8358 for current-pose classification to 0.8973, corresponding to a 7.36% relative improvement, and improved performance in all five evaluation blocks. A causal Temporal Convolutional Network achieved a Macro-F1 of 0.8699, indicating that the simpler causal aggregation was more effective under the evaluated dataset conditions. Paired analysis yielded a mean Macro-F1 improvement of 0.0615 with a 95% confidence interval of [0.0308, 0.0921] and a large observed effect size (Cohen’s 𝑑𝑧 = 2.49); however, exact two-sided tests did not reach the conventional significance threshold (𝑝 = 0.0625) because only five paired blocks were available. These findings suggest that short causal pose context can provide useful information for exercise-phase recognition while remaining compatible with real-time processing.

248-260 17
Abstract

The article presents a developed information-analytical methodology for the comprehensive evaluation of the effectiveness of integrating digital tools into teachers’ professional practice. The relevance of the study is determined by the need to move from descriptive self-assessment of digital competencies to formalized data analysis that enables the measurement of the practical application of recommendations and changes in professional practice over time. The methodological framework is based on the developed DTDC model, which comprises four levels: Awareness, Application, Integration and Visualization, and Design and Innovation. The initial dataset was generated from the results of a baseline survey involving 916 teachers. Based on these results, a set of differentiated recommendations was developed to enhance teachers’ skills in selecting, applying, integrating, and creating digital educational solutions. The recommendations were distributed to teachers for a 12-week practical pilot implementation. For subsequent evaluation, a system of normalized indicators was developed, covering familiarity with the recommendations, their practical application, regularity of use, changes in the DTDC level, and the perceived impact of digital tools on the quality of professional practice. The proposed algorithm involves collecting final survey data, coding responses, normalizing values, calculating component-specific DTDC indices, determining an integral index and implementation coefficients, and statistically testing the identified relationships. Scale reliability will be assessed using Cronbach’s 𝛼, while associations between categorical variables will be evaluated using Pearson’s chi-square test 𝜒2. The current outcome of the study is the development of a formalized methodology, a final survey instrument, and a procedure for information-analytical data processing. Final conclusions regarding the effectiveness of the recommendations will be formulated after the pilot implementation has been completed. The proposed approach ensures the reproducibility of the evaluation and provides a basis for automating the monitoring of digital tool integration into the educational process. The practical significance of the methodology lies in its potential use by educational organizations to compare the results of different groups of teachers, identify problematic components of digital practice, support managerial decision-making, and adjust professional development programmes based on quantitatively measurable longitudinal data.

260-278 10
Abstract

Diabetes mellitus is one of the most common chronic non-communicable diseases and requires early identification of individuals at increased risk. This article presents the development of a web application for preliminary diabetes risk assessment based on users’ symptomatic and demographic data. The system was implemented using Python/FastAPI, HTML/CSS/JavaScript, and a machine learning module trained on the open UCI Early Stage Diabetes Risk Prediction Dataset. Three classifiers were compared in this study: Logistic Regression, Support Vector Machine, and Random Forest Classifier. The best performance on the held-out test set was achieved by the Random Forest model, which was integrated into the web application to calculate risk probability. The user enters age, gender, and a set of symptomatic features, after which the system displays the risk level, a visual indicator, and a block of preventive recommendations. The developed application should be considered a software prototype for preliminary self-assessment and increasing user awareness. It is not intended for diagnosis and requires further external clinical validation on independent data. Model comparison was performed using repeated stratified 10-fold cross-validation (five repetitions, 50 estimates per model). The Random Forest model achieved the best and most stable performance (accuracy 98.27 ± 1.60%, F1-score 98.59 ± 1.31%, ROC-AUC 99.93 ± 0.15%), and its superiority over SVM and Logistic Regression was confirmed statistically (corrected paired t-test, 5×2cv t-test and Wilcoxon signed-rank test, p < 0.05). Feature contributions were analysed by three independent methods (Gini importance, permutation importance and SHAP values), which consistently identified polyuria, polydipsia, gender and age as the most informative features. Based on this ranking, a reduced questionnaire of nine features was constructed, for which no statistically significant loss of classification quality was observed compared with the full set of sixteen features (accuracy 97.62 ± 1.87%, p = 0.246), reducing the amount of user input by 43.8%.

278-288 13
Abstract

Subject of the study. The widespread adoption of the Internet of Things (IoT) in smart homes, industrial automation, transportation, healthcare, and smart city infrastructures has led to a significant increase in the number of potential attack surfaces and unauthorized access points. Unlike conventional computing systems, IoT devices are characterized by limited hardware resources, including restricted memory capacity, low computational performance, limited communication bandwidth, and low power consumption. These constraints hinder the direct application of computationally intensive and cryptographic information security monitoring techniques without adaptation to resource-constrained environments. Method. To construct an informative feature representation of IoT device security states, a method based on network traffic time series segmentation using statistical, frequency-domain, and threshold-based criteria is proposed. The feature space is further expanded by incorporating external and internal factors affecting the observed feature values. Security state classification is performed using six machine learning algorithms of varying computational complexity: Logistic Regression, Naive Bayes, Support Vector Machine (SVM), Random Forest, Multilayer Perceptron (MLP), and Convolutional Neural Network (CNN). Main results. The proposed method was experimentally evaluated using both a laboratory testbed based on IoT nodes (IEEE 802.15.4, TelosB, ESP32) and the UNSW-NB15 dataset. The results demonstrate that network traffic time series segmentation combined with contextual information enables the construction of a more compact and discriminative feature space while reducing the computational cost of classifier training. Practical significance. The proposed approach can be applied to the development of lightweight information security monitoring systems for resource-constrained IoT infrastructures. Lightweight machine learning models can be deployed on edge devices, whereas more computationally intensive models can operate on gateways or cloud platforms, thereby reducing false alarm rates and improving the timeliness of cyberattack detection.

288-311 21
Abstract

Sustainable rural development is a key condition for food security and economic growth in Kazakhstan. Despite substantial public investment in digital infrastructure and agriculture, uneven territorial development, low labour productivity, limited economic diversification and outward rural migration persist.
The paper proposes the concept of the Intelligent Rural Territory (IRT), treating a rural area as an integrated socio-economic system in which digital technologies raise the efficiency of the agro-industrial complex, expand exports and improve living standards. Unlike Smart Village and Digital Village, which focus on telecommunication infrastructure and individual services, the model treats digital transformation as the basis of a new rural economy. A six-level architecture links infrastructure, data, analytics, platforms, new economic activities and sustainability outcomes through an upward data flow and a downward control loop.
The Intelligent Rural Territory Index (IRTI) is introduced for integrated assessment of digital maturity, economic performance, social sustainability and export readiness. Unlike the compensatory additive IDI family, IRTI uses non-compensatory geometric aggregation, so failure in any of the six blocks cannot be offset by the others. It is implemented as a modular information system with fixed normalisation bounds, logged winsorisation, an explicit missing-data policy and a reproducibility manifest; ranking uses a Dirichlet distribution of 100,000 weight vectors, reporting the median rank and the 5–95 % rank interval.
This is a methodological study: the numerical results come from a synthetic panel of 17 units and verify the software implementation, not actual regions. The index is published for 14 units, the ranks of six are unstable with respect to weights, and non-compensatory aggregation penalises unbalanced profiles without reordering the balanced part of the sample. Computation on official statistics is planned for a subsequent publication.
The results can inform state policy for rural digital transformation in Kazakhstan and the national programme «Intelligent Rural Territory of Kazakhstan – 2035».

312-321 18
Abstract

The increasing demand for reliable rechargeable energy storage systems has strengthened the need for accurate laboratory testing procedures for cylindrical cell batteries. Laboratory and pilot-line testing stations repeatedly perform charging, discharging, voltage verification, capacity estimation, and internal resistance measurements. These operations require precise current and voltage regulation because even small transient deviations may affect cell classification, aging analysis, and safety evaluation. This work presents a simulation-based study of PID-type Iterative Learning Control (PID-type ILC) for repeated laboratory line testing of cylindrical cell batteries. The proposed approach combines the classical proportional-integralderivative control structure with an iterative learning mechanism that updates the control input after each repeated cycle using the previous tracking error. A simplified MATLAB model of a cylindrical battery charging process was developed using state-of-charge dynamics, internal resistance, terminal voltage estimation, actuator saturation, and a repeated finite-time testing interval. The simulation evaluates the controller response over successive cycles and analyzes current tracking, voltage behavior, control effort, state of charge, and error convergence. The results demonstrate that PID-type ILC can reduce tracking error over repeated cycles and improve the repeatability of laboratory battery testing. The method is especially relevant for automated quality-control lines where many cells are tested under similar protocols. The proposed simulation can serve as a preliminary digital model before experimental implementation on a real battery testing bench.

321-331 17
Abstract

Yield forecasting for apple orchards in the mountainous and foothill regions of Kazakhstan remains an open challenge: conventional agronomic methods are subjective, while computer vision approaches require representative training datasets that are unavailable for this region. This paper presents the architecture of a yield forecasting information system and its interpretable semi-mechanistic computational core for the regionalized Aport cultivar (Malus domestica cv. Aport) in the foothill microzone of the Trans-Ili Alatau. The core is implemented as a four-stage phenological cascade describing flowering, fruit set, fruit growth and yield formation, with explicit provenance, an uncertainty range and a structural identifiability assessment for every parameter; the logistic fruit growth function describes the within-season trajectory of mass accumulation and, in the present version, does not enter the final yield equation, remaining a prospective module. Parametric uncertainty is propagated by the Monte Carlo method: a one-degree Celsius change in the base temperature shifts the computed flowering date by five to eight days, whereas the variability of the computed yield is governed mainly by the fruit set coefficient and orchard structure parameters. A demonstration run on data from the Almaly farm (Almaty Region), performed on the PARAM BILIM supercomputer, gives 11.05 t/ha with a 95 % parametric uncertainty interval of ± 2.15 t/ha; the run is parameterised from a single field point (n = 1), is illustrative in nature and is not an independently validated operational forecast. The proposed architecture is regarded as a basis for subsequent integration into a digital twin of an orchard.

331-342 20
Abstract

In this paper, the application of the Soft Actor-Critic (SAC) approach to uplink power control in 5G New Radio networks is investigated. A Gymnasium-compatible simulator for a 10-user uplink cell is constructed using the 3GPP TR 38.901 Urban Macro NLOS path-loss model with stochastic shadowing and Rayleigh fading at 3.5 GHz. The SAC agent observes SINR, transmit power, and path loss for all users and jointly selects continuous transmit powers in the range [0, 30] dBm. The training reward combines throughput (0.50), an energy-efficiency term (0.25), SINR quality (0.15), and fairness (0.10). Three SAC policies are trained for 500,000 timesteps and evaluated on 100 common scenarios against Full Power, Equal Power, and a simplified 3GPP-inspired Fractional Power Control (FPC) baseline. Using the standard network-level energyefficiency metric, SAC achieves 14.866 Mbit/J at a mean transmit power of 9.905 dBm and a mean throughput of 2.540 Mbps. Network energy efficiency is significantly higher than Full Power and simplified FPC, while its difference from Equal Power is not statistically significant after multiplicity correction. A reward-weight sensitivity study confirms that changing objective priorities shifts the learned throughput-energy-efficiency operating point rather than yielding one universally dominant configuration.

MECHANICAL ENGINEERING AND MECHANICS (ORIGINAL ARTICLE)

343-351 17
Abstract

The paper presents a comparative analysis of technical and operational characteristics of modern chisel plows and subsoilers used for non-inversion anti-erosion soil tillage. The relevance is determined by the high level of wind erosion in Northern Kazakhstan, where over 52 million hectares are subject to erosion. The aim of work is to conduct a comparative analysis of the technical and operational characteristics of modern chisel plows and sweep subsoilers for anti-erosion tillage. For comparative analysis, nine implements were selected, divided into two groups: chisel plows (PChM-4, PCh-4-5, PCh-4.5PM, KAMA TIGER 3, Dondi 813) and sweep subsoilers (RSP-5.4, Cultiplow Platinum SR Agrisem, STAVR PG-5, STAVR PG-7). The official test protocols of accredited MTS for 2014-2025 served as the information base. The comparison methodology was based on the requirements of GOST 20915-2011, GOST 33736- 2016, GOST 52777-2007 and GOST 24088-88. The analysis was carried out according to qualitative and technical and operational indicators. Chisel plows provided soil crumbling of 90.6-98.6%, while for sweep subsoilers this indicator was 49.9-94.9% (RSP-5.4 – 62.3-68.4%). The best stubble retention was achieved by STAVR PG-5 (89.0%); chisel plows meet the standard of ≥60% but are inferior to sweep subsoilers, which is critical for anti-erosion technologies. Among chisel plows, PCh-4.5PM showed the highest working capacity (5.14-5.22 ha/h); among subsoilers, Dondi 813 led (5.43 ha/h). The lowest specific fuel consumption was recorded for PChM-4 (14.62 kg/ha), the highest for RSP-5.4 (21.36 kg/ha). Based on the overall set of indicators, PCh-4.5PM and PChM-4 are recommended for the conditions of Northern Kazakhstan; under the threat of wind erosion, STAVR PG-5 is preferable, and for compacted soils, RSP-5.4.

351-361 18
Abstract

This article investigates the effect of electrolytic-plasma treatment (EPT) parameters–voltage (260-320 V) and dwell time (2-5 s) – on the microstructure, phase composition, microhardness, elastic modulus, and tribological properties of 20X steel. Treatment was performed in a 12 wt.% Na₂CO₃ aqueous solution. X-ray diffraction and scanning electron microscopy showed the formation of α′-martensite with a bodycentered cubic (BCC) lattice without residual austenite or carbide phases. The threshold treatment mode was 260 V for 2 s, at which complete austenitization was not achieved. Increasing the dwell time to 5 s at 300 V nearly doubled the microhardness to 441.66 HV, while increasing voltage at 2 s primarily affected carbon supersaturation. The lowest friction coefficient (μ = 0.498) was obtained at 320 V for 2 s, indicating that maximum hardness does not necessarily correspond to the best tribological performance. The results demonstrate that EPT parameters should be selected according to the required operational properties of 20X steel.

362-368 16
Abstract

This paper presents the results of a study on the load characteristics of a jet-type reaction pneumatic motor powered by compressed air. The design features of a two-stage motor are considered, in which energy conversion is achieved through the reaction force of the air jet and the pressure exerted by the expanding compressed air on the rotor blades. The operating principle of the device is described, including the processes of air supply, distribution, expansion, and exhaust of the working medium. To evaluate the operational characteristics, mathematical modeling was carried out in the MATLAB/Simulink environment. The influence of inlet pressure on the main performance parameters of the pneumatic motor, including output power, rotational speed, angular velocity, and torque, was analyzed. The results show that increasing the inlet pressure leads to a steady increase in all investigated parameters. The most pronounced dependence was observed for output power and rotational speed, confirming the possibility of controlling the operating modes by varying the supply air pressure. The increase in torque is attributed to the higher reaction force generated by the air jet and the enhanced effect of the expanding air on the rotor blades. The obtained results make it possible to evaluate the operability of the proposed design and the variation of its performance over a wide pressure range. These findings can be applied to the design of pneumatic motors, the selection of optimal operating conditions, and serve as a basis for further experimental investigations.

369-378 22
Abstract

Induction motors are available everywhere in industrial systems, used to drive pumps, compressors and fans, but they are prone to electrical failures (broken rotor bars, stator Inter-turn short circuiting, voltage anomalies) and mechanical failures (bearing damage, misalignment, rotor eccentricity). These flaws lower productivity, increase vibration and temperature, and lead to unplanned closures. Predictive maintenance is thus keen on accurate early detection. The current paper introduces an automated fault diagnosis system that has been tested on the University of Ottawa Electric Motor Dataset (UOEMD-VAFCVS) which offers synchronized vibration (three accelerometers), acoustic, and temperature measurements of eight motors at constant speed and ramp-speed conditions. The diagnostic pipeline is based on multi-sensor fusion with signal processing (FFT/Welch PSD, STFT, discrete wavelet transforms, Hilbert envelope analysis) and a hierarchical machine learning model (Random Forest (RF), Convolutional Neural Network (CNN), and a hybrid CNN Transformer model). CNN-Transformer is the most accurate (91.4) and macro F1-score (0.91) model and is superior to RF (81.2) and CNN alone (87.6), with all models satisfying real-time inference requirements (less than 10ms per window on CPU). These findings confirm the usefulness of multi-sensor fusion and attention-based temporal modeling to Industry 4.0 predictive maintenance.

378-390 23
Abstract

This study addresses the problem of ensuring the dimensional accuracy of cortical bone screws manufactured from Ti-6Al-4V titanium alloy using computer numerical control (CNC) machine tools. The relevance of the research is determined by the stringent quality requirements for medical implants and the need to maintain stable thread-forming conditions under progressive cutting tool wear. The aim of the study is to develop and experimentally validate a method for adaptive compensation of thread-cutting head wear using CNC system capabilities. The research was conducted at the Smart Engineering Competence Center of D. Serikbayev East Kazakhstan Technical University. Experimental specimens were manufactured on a MANURHIN K'MX 726 EVO Swiss-type CNC lathe, while the thread geometry was evaluated using a Mahr MarSurf CD 140 contour measuring system. The experimental program comprised nine machining modes with a maximum accumulated cutting length of 57 m. The results showed that increasing accumulated machining length was associated with systematic changes in thread pitch, profile depth, and flank angles. An empirical linear relationship was obtained to estimate the required compensation offset within the investigated machining-length range. For the maximum investigated operating length, the calculated compensation value reached ΔZ = 0.0509 mm, which closely matched the implemented CNC compensation of 0.050 mm. After applying the calculated correction, the thread pitch deviation was limited to 1.28% relative to the nominal value of 1.25 mm, ensuring stable thread profile geometry without tool replacement. The practical significance of the proposed approach lies in improving the dimensional accuracy of medical implants, extending the effective service life of the thread-cutting head, and reducing manufacturing costs. Future research will focus on automated tool wear monitoring systems and the integration of adaptive compensation algorithms into intelligent digital manufacturing environments.

FOOD ENGINEERING AND BIOTECHNOLOGY (ORIGINAL ARTICLE)

391-398 23
Abstract

The article presents a technology for creating a dry probiotic bioproduct using Lactobacillus paracasei-010K and Torulopsis sphaerica-105k strains, ensuring the preservation of their survival and functional characteristics. The main object of the study was the probiotic strain Lactobacillus paracasei-010K, obtained from koumiss and having a pronounced inhibitory effect. Two formulations have been developed for this method: a monoculture and a bacterial-fungal mixture using hydrolyzed milk as a substrate for cultivation. Freeze drying was carried out according to a programmed sequence, including freezing, freeze drying, and subsequent drying steps. Survival was estimated by counting the number of colony-forming units on the plates.
After freeze-drying, the viability of Lactobacillus paracasei-010K cells was 88.6% in the monoculture and 91.9% in the bacterial-fungal population; for yeast element T. sphaerica – 105K reached 91.3%. The overall viability of the strains remained at 88-92%, while their inhibitory effect on the test cultures of Escherichia coli, Salmonella Dublin and Bacillus subtilis decreased by no more than 10-12%. The aggregate demonstrated a slightly more pronounced inhibitory effect compared to the monoculture, which indicates the synergistic effect of the yeast component.
The developed technology makes it possible to obtain homogeneous dry biological products with high functional characteristics and potential storage stability, demonstrating their prospects for use in the food industry

398-409 16
Abstract

This article analyzes a comprehensive assessment of the impact of adding hawthorn leaf extract (Crataegus almaatensis) to apple, pumpkin, and beetroot pastilles on product quality. The experiment determined the organoleptic characteristics, vitamin content, antioxidant activity, and microbiological safety of the extract-enriched pastille samples.
Taste analysis results showed that the pastilles with 3% hawthorn leaf extract received the highest ratings for taste, pleasant aroma, and appearance. Furthermore, these samples showed an increase in ascorbic acid content: the vitamin C concentration in the apple-pumpkin pastille increased from 38.06 mg/100 g to 62.97 mg/100 g, and in the apple-beetroot pastille, from 22.61 mg/100 g to 29.98 mg/100 g.
Microbiological testing of the pastille samples confirmed that all finished products complied with current sanitary and hygienic standards. No Escherichia coli bacteria were detected in the samples analyzed, and the total yeast and mold counts were below acceptable levels.
The incorporation of hawthorn leaf extract (Crataegus almaatensis) into fruit pastille not only improved the organoleptic characteristics of the product, but also increased its vitamin C content, enhanced antioxidant activity, and improved its functional value. Microbiological analysis confirmed the safety of all samples. Therefore, hawthorn leaf extract can be considered an effective and safe functional ingredient for use in fruit pastille production.

409-416 19
Abstract

This article presents the results of research aimed at improving safflower oil filtration technology through the use of by-products from cereal and oilseed processing as a filtering material during the primary purification stage. A technological scheme involving the use of flax fibers for filtering oil obtained by cold pressing on a modified screw press equipped with a pressure regulation mechanism was developed and experimentally validated. A comprehensive analysis of the organoleptic, physicochemical, and biochemical properties of safflower oil before and after filtration was conducted. Oil quality was evaluated by determining the acid value, oxidation indicators, content of non-fat impurities, antioxidant activity, and storage stability. The results showed that the application of flax fibers reduced the mass fraction of sediment and non-fat impurities to 0.02%, decreased the acid value to 1.060 mg KOH/g, increased antioxidant activity by 42.65%, and extended the shelf life of the oil to 12 months. The proposed technology improves filtration efficiency and enhances the consumer characteristics of the final product. The research findings have been confirmed by patents of the Republic of Kazakhstan and implemented under industrial conditions. Furthermore, the use of flax fibers as a filtration material was proven to be an environmentally friendly and economically efficient technological solution that does not require the use of additional chemical reagents.

417-425 18
Abstract

Developing environmentally friendly biostimulants to increase crop resistance to abiotic and biotic stresses is an urgent challenge. This article presents the results of research on the development of technology for the production and use of phytohormone fusicoccin (FC) from wheat seeds (Triticum aestivum L.). A comprehensive assessment of seven varieties of spring wheat for resistance to pathogens (helminthosporiosis, alternariosis, smut) and abiotic stresses (salinity, drought, temperature extremes, latching, excessive moisture) was carried out. The most stable varieties («Saratov», «Altai», «Ulbinka 25») were identified, which showed high germination and germination energy under stressful conditions. A technique for FC isolation was developed and optimized, including stress induction in seeds, ethanol extraction, purification by reverse phase high performance liquid chromatography (HPLC), and quantification by spectrophotometry. The method validation confirmed its high reproducibility (R²> 0.998) and stability. The results obtained demonstrate the potential of using fusicoccin obtained from available plant raw materials as an effective biostimulant for pre-sowing treatment of seeds in order to increase yield and stress resistance of wheat.

425-432 22
Abstract

The article presents the results of a study of the physico-chemical characteristics, antioxidant properties and rheological parameters of vegetable raw materials, as well as the fruit, vegetable and berry dessert "confiture", created on its basis. The study examined two jam samples enriched with natural nutrients and natural antioxidants, using fruits and berries such as cranberries, sea buckthorn, raspberries, melons, plums and oranges.
The main purpose of the study was to substantiate the expediency of using herbal ingredients with high antioxidant activity in the development of a functional fruit, vegetable and berry dessert "confiture". In addition, their effect on the structural and mechanical properties of the finished product was studied. The expansion of the range of natural desserts based on fruits, vegetables and berries contributes to the improvement of rational nutrition by replacing traditional sweet products containing sugar with products with increased nutritional and biological value.
In the course of studies of the rheological properties of dessert confiture, enriched with natural nutrients and antioxidants, the following main rheological parameters were experimentally determined: viscosity, torque, fluidity, stickiness and adhesive ability. It is known that rheological parameters have a significant impact on both the organoleptic acceptability of products and their technological adaptability in conditions of industrial processing, packaging and storage.
Consequently, the results of a comprehensive analysis of the rheological parameters presented in the table indicate that the prototype confiture No. 2 demonstrates the most favorable combination of rheological characteristics among the studied options. This gives reason to consider it technologically optimal.

432-441 20
Abstract

This article discusses the technology for producing "Homemade Cheese" from goat's milk with paprika. Goat's milk is a highly demanded raw material for cheese production. A distinctive feature of the new cheese is the use of a mesophilic symbiotic starter culture consisting of Lactococcus lactis subsp. lactis and Lactococcus lactis subsp. cremoris. The resulting cheese is not intended for long-term storage and belongs to the group of fresh cheeses.
The selected starter culture ensures intensive growth of lactic acid microorganisms and the formation of a stable cheese curd structure. Another characteristic feature of the cheese is the use of sweet red paprika for coating its surface. The finished product is characterized by optimal physicochemical parameters and pronounced sensory properties. The moisture content was 50.4%, protein content 29.3%, fat in dry matter 43.8%, and lactose content 0.8%.
A total of 10.7 liters of milk were required to produce 1 kg of cheese, indicating a good and stable yield. Microbiological studies confirmed the absence of coliform bacteria, yeasts, molds, and spores of anaerobic microorganisms of the genus Clostridium, while maintaining a high level of beneficial lactic acid microflora in compliance with the requirements of TR CU 033/2013.
The obtained results demonstrate the safety, high quality, and technological efficiency of goat milk cheese production.

441-456 20
Abstract

Amylolytic enzymes are among the significant industrial enzymes with a high percentage of production. Their action is based on the hydrolysis of starch molecules to glucose. Amylases are used in everyday life, in the food, textile, paper, starch processing industries, in the manufacture of pharmaceuticals, in diagnostics and treatment. The producers are plants, animals, and microorganisms. The main percentage of producers are microorganisms, as microbial amylases are more stable, effective and economically beneficial. The main producers of amylolytic enzymes are bacteria of the genera Bacillus, Lactobacillus, Klebsiella, Halobacillus and others, fungi of the genera Aspergillus, Penicillium, Rhizopus, Mucor, Trichoderma and others, various actinomycetes and yeasts. Their activity is based on the ability to secrete enzymes with further selection of conditions and nutrient media for fermentation. This review highlights the importance of the hydrolytic enzyme amylase of bacterial and fungal origin, global crop strains and commercial preparations used in various industrial fields. In the process of working on the project, we isolated promising enzymatically active cultures of bacteria and fungi from grain crops. Among them, 6 cultures of bacteria of the genus Bacillus sp are active. Phenotyptic and genotypic sipattamalary anktalgan. Their phenotypic and genotypic characteristics are noted.

457-466 18
Abstract

This study provides a technological assessment of the suitability of Kazakh wheat varieties for brewing malt production, with particular attention to grain characterized by an increased protein content. The relevance of the work is determined by the fact that locally grown wheat does not always meet the protein requirements usually applied to raw material for malting; nevertheless, an appropriately selected steeping and germination regime may improve its processing suitability. The wheat varieties Kazakhstanskaya 10 and Steklovidnaya 24 were used as the research objects. A conventional malting method and three experimental schemes were compared under laboratory conditions. The schemes differed in the duration of steeping stages, air rests, and the main germination period. The assessment included the moisture accumulation pattern during steeping, the duration of germination, and the organoleptic and physicochemical characteristics of the finished malt. The results showed that Scheme No. 1 did not provide sufficient moisture accumulation, whereas Scheme № 2 led to excessive hydration in some samples. Scheme No. 3 was the most balanced option: the final grain moisture content reached 44.4-52.2%, and germination was completed within 96 hours. The extract content of the obtained malt was 78-79%, exceeding the minimum regulatory requirement for brewing malt. Both varieties were suitable for malt production; however, Steklovidnaya 24 demonstrated a more favorable combination of quality indicators due to its lower protein content, acceptable post-malting vitreousness, and more stable technological performance. The scientific novelty of the study lies in the comparative evaluation of steeping and germination regimes for local high-protein wheat varieties. Its practical significance is the substantiation of a regime that can be further adapted for wheat malt production under industrial conditions.

466-474 16
Abstract

This article considers the technology for producing a food additive with improved physicochemical, functional, and technological properties through the advanced processing of wheat bran, a secondary raw material. The processing of wheat bran was carried out in a 0.05 M citric acid solution (pH 4.8 ± 0.1) at a temperature of 45°C using ultrasound-assisted treatment (35-40 kHz) for 30 minutes. After fractionating the treated mass, its solid residue was washed to a neutral pH, subjected to freeze-drying (lyophilization), and ground into powder.
The chemical composition of the food additive obtained by this method is characterized by the following content: protein 15 g, fat 3.5 g, carbohydrates 12 g, and the dietary fiber share was 40%. Furthermore, the resulting additive is distinguished by a high water-holding capacity (WHC) of 185.5% and an oil-holding capacity (OHC) of 343.2%. These indicators confirm its pronounced technological properties and capacity to stabilize the structure of food systems.
The proposed method enables the production of a food additive with improved technological characteristics from wheat bran. The developed food additive can be applied in food product technologies, including the dairy industry. This increases the nutritional value of end products, enhances their quality, and expands the product range.

475-482 20
Abstract

This article examines the technological aspects of nutritional support for patients with amyotrophic lateral sclerosis (ALS) under conditions of combined hypermetabolism and dysphagia. Hypermetabolism has been shown to increase the body's energy and protein requirements, while dysphagia necessitates the adaptation of food texture characteristics. The methodological basis of the study consisted of the analysis, systematization, and generalization of scientific publications devoted to the nutritional support of ALS patients, as well as modern approaches to the development of specialized food products. Approaches to the development of texture-modified products, including homogenization, viscosity control, structuring, and stabilization of dispersed systems, were analyzed. The requirements for food systems intended for patients with swallowing disorders were considered, including structural stability, controlled viscosity, and consumption safety. The necessity of forming a homogeneous consistency, controlled particle size, and pseudoplastic rheological properties ensuring safe swallowing was substantiated. A model of a specialized product integrating nutritional and technological parameters was proposed. The main requirements for specialized products, including energy density, protein content, consistency, rheological characteristics, and structural stability, were identified. The practical significance of the study lies in substantiating approaches to the development of products with predetermined rheological properties for patients with swallowing disorders.

483-489 16
Abstract

The article examines the conditions for obtaining extracts from wild-growing sea buckthorn fruits (Hippophae L.) collected in the foothills of the Ile Alatau (Kazakhstan) using ultrasound-assisted extraction. Depending on their eco-geographical origin and varietal characteristics, sea buckthorn berries significantly differ in their biochemical composition. Wild and cultivated forms of sea buckthorn growing in Kazakhstan are highly valued as a rich and accessible plant raw material. Sea buckthorn fruits contain ascorbic acid, tocopherols, carotenoids, flavonoids, organic acids, polyunsaturated fatty acids, tannins, and polysaccharides.
The study presents a comparative analysis of six samples obtained at solid-to-solvent ratios of 1:5 and 1:10, using ethanol concentrations of 30%, 50%, and 70%. The dry matter yield was determined by the gravimetric method. The total polyphenol content in the extracts was measured spectrophotometrically using the Folin-Ciocalteu reagent and expressed as gallic acid equivalents. The antioxidant activity of the extracts was evaluated using FRAP and DPPH methods. The results showed that the efficiency of ultrasound-assisted extraction is strongly dependent on the solid-to-solvent ratio. The highest dry matter yield was achieved at a 1:10 solid-to-solvent ratio using 70% ethanol, whereas the maximum polyphenol content and antioxidant activity were achieved at a 1:5 solid-to-solvent ratio using 70% ethanol. The obtained data can serve as a practical basis for developing industrial technologies for producing natural antioxidants and functional products based on sea buckthorn fruits.

490-496 19
Abstract

This article considers all quality indicators of sausage products and comprehensive methods for assessing their quality and safety. The study analyzed the organoleptic properties, physicochemical composition, and microbiological stability of sausage products. In addition, food safety assurance is addressed through the implementation of the HACCP system by identifying critical control points throughout the production process.
Sausage products are among the most commonly consumed foods; therefore, their quality and safety must meet high standards. In evaluating the quality of finished products, organoleptic indicators are of primary importance. These include appearance, color, odor, taste, and texture. A high-quality product is characterized by a clean surface, intact casing, uniform color, characteristic odor and taste, and a firm, elastic consistency, indicating proper production technology.
Physicochemical indicators of sausage products characterize their nutritional value and storage stability. These include moisture content, protein, fat, salt mass fraction, and pH value. A high moisture content may lead to rapid spoilage of the product, while an optimal level of salt ensures microbiological stability, and protein and fat content determine the energy value of the product.
Microbiological indicators play a key role in food safety assessment. Finished products must not contain mesophilic aerobic and facultative anaerobic microorganisms, coliform bacteria, pathogenic microorganisms, including Salmonella. Deviations from established standards indicate non-compliance with sanitary requirements and render the product unsuitable for consumption.
Thus, the implementation of the HACCP system, identification of hazards, and continuous monitoring at all stages of production ensure the quality and safety of sausage products and ultimately protect consumer health.

497-507 19
Abstract

Currently, the spread of pesticides in the agro-industrial complex poses a serious threat to the stability of ecosystems, soil quality and human health. In this regard, there is growing interest in biological recovery technologies as an effective way to address this global environmental challenge. In this direction, the bacteria of the genus Pseudomonas attract special scientific attention, possessing high metabolic activity and the ability to break down synthetic chemicals. This literature review provides a bibliometrical and content analysis of the latest scientific research on the role of Pseudomonas bacteria in the bio-recovery of environments contaminated with pesticides. According to research, the number of scientific publications on this topic has been growing steadily in recent years. India and China stand out as countries that are actively pursuing research in this direction. Most scientific work is concentrated in the fields of ecology, microbiology and biochemistry. As part of this study, using the Prisma methodology, a selection of scientific publications from the Scopus database was made for the period 2010-2026. The search for articles in the Scopus database was carried out using keywords «pesticide stress» and «pseudomonas». The results of the search by keywords selected 91 articles, and in the selection were considered 20 most significant. Only referenced articles published in English were included in the analysis. Studies show that Pseudomonas bacteria are actively involved in pesticide degradation, reducing oxidative stress and restoring contaminated soil microflora. Pseudomonas bacteria have been widely studied in terms of nitrogen fixation, the release of axins, plant growth stimulation by formation of phytohormones, destruction of phyto-pathogens, and the production of antibiotics. Although the effects of bacteria on abiotic stress (drought, salination) are often discussed, data on their ability to relieve pesticide stress is still missing. Their use to clean up soil and aquatic ecosystems contaminated by pesticides is one of the effective strategies for sustainable environmental management.

507-518 21
Abstract

The article presents the results of research on the acid-enzymatic method of processing secondary protein raw materials. The aim of the work is to develop technological modes and parameters for the production of dry peptone based on protein hydrolysis with increased biological activity. The object of the study was hydrolysis methods. The effect of the hydrolyzing action of the enzyme complex of animal proteases on the change in the properties of meat and fish raw materials has been studied. Optimal technological modes and parameters of enzymatic hydrolysis of raw materials have been determined. Conventional chemical, organoleptic, and biochemical methods were used in the research. The physico-chemical, organoleptic, and biochemical parameters of the hydrolysate were studied. It has been established that the quality indicators of protein hydrolysate comply with the requirements of regulatory documents. The research results will be used in the hydrolysis of protein in the processing of livestock raw materials. The involvement of by-products in production makes it possible to extract all the valuable components of the raw material, provides an increase in the depth of hydrolysis and its effectiveness due to an increase in the degree of cleavage of protein fractions of meat and fish raw materials used during processing with a complex of enzymes. The practical significance of the work lies in the use by enterprises processing secondary meat and fish raw materials of an improved technology of protein hydrolysates for their use as the bases of bacterial nutrient media.

518-525 17
Abstract

Traditional dairy products have long served as the primary source of lactic acid bacteria (LAB). However, current trends in food biotechnology, including the development of lactose-free and functional foods, have highlighted the need to identify alternative plant-based sources of these microorganisms. The aim of this literature review is to summarize current scientific knowledge on lactic acid bacteria associated with wheat sprouts, analyze their biotechnological potential, and review published methods for their isolation and molecular identification. Based on an analysis of the available literature, the characteristics of endophytic lactic acid bacteria belonging to the genera Lactobacillus, Pediococcus, and Weissella inhabiting wheat tissues, as well as their role in the fermentation of plant-derived substrates, are discussed. The reviewed studies indicate that wheat sprouts at the early stage of development (1-3 cm in length) are considered a promising source for the investigation of endophytic LAB due to their high microbial metabolic activity and low level of surface contamination. Published data demonstrate that these strains are capable of producing bioactive compounds, exhibiting antioxidant and antimicrobial activities, and enhancing the functional properties of cereal-based products. Overall, the available evidence suggests that endophytic lactic acid bacteria from wheat sprouts have considerable potential for the development of next-generation functional foods, biopreservation technologies, and novel plant-based starter cultures.

525-534 19
Abstract

In the production of products for clinical nutrition, scientists have recently been increasingly focusing on raw materials with medicinal properties, high nutritional and biological value, and disease prevention properties. Amaranth grain is one such raw material, unique in its chemical composition and high nutritional value compared to many other crops available on the market. Therefore, this study investigated the chemical composition and functional properties of amaranth grains and assessed the potential and importance of their use in clinical purpose. The study found that amaranth grains are particularly rich in lysine, which is deficient in cereals, as well as sufficient amounts of threonine, valine, and other essential amino acids. Among minerals, calcium, magnesium, iron, and potassium showed high values, while among vitamins, vitamin E was high, with the content per kg being 11.29 mg. The study results showed that unsaturated fatty acids predominate over saturated fatty acids in the fatty acid composition of amaranth lipids. Among the unsaturated fatty acids, linoleic and oleic acids predominated, accounting for 34.56% and 24.82%, respectively. Furthermore, amaranth grains were free of toxic substances (Pb, As, Cd, Hg). Thus, it was established that amaranth grains possess high nutritional and functional properties, based on the above characteristics, and in the future, they can be considered a suitable plant material for specialized products, such as enteral nutrition.

534-543 20
Abstract

This article presents the development of a pâté formulation based on sheep by-products with the addition of mung beans and chickpeas. The study comprehensively investigated the influence of plant-based ingredients on the organoleptic, physicochemical, and technological properties of the product. A technological production flowchart was developed, and the nutritional value and functional characteristics of the raw materials used were analyzed. In addition, the scientific and practical advantages of incorporating legumes into meat products were substantiated.
The research findings identified the optimal product formulation and demonstrated an increase in nutritional value, improved structural and mechanical properties, and reduced production costs. Analysis of the chemical composition and technological characteristics showed that plant-based ingredients enhance the emulsifying capacity of the meat system, resulting in a homogeneous and stable paste-like structure. The use of mung beans and chickpeas reduces the fat content of the product while increasing the levels of dietary fiber, vitamins, and minerals.
The sensory evaluation results demonstrated that the developed product exhibited high scores for taste, aroma, color, and consistency. Furthermore, the incorporation of legumes improved the water-holding and fat-binding capacities of the product, ensuring the stability of its quality characteristics during storage. The obtained results confirm that the effective combination of meat and plant-based raw materials makes it possible to produce a high-quality, safe, and cost-effective product. The findings also confirm the potential of the developed pâté as a functional and dietary food product suitable for widespread application in the food industry and provide a basis for expanding the range of innovative meat-plant products.

543-553 19
Abstract

The article presents the development of the technology for a fermented milk beverage called «NärliKoje». The relevance of the study is determined by the implementation of the public health concept of the Republic of Kazakhstan, which aims to expand the range of functional and health-promoting food products. Cow’s milk, rice, millet, and pearl barley were used as the main raw materials. The YO-MIX 300TM300 LYO 100 DCU starter culture was used for fermentation.
Experimental formulations were tested, and the optimal ratio of dairy and plant-based raw materials was determined, enabling the production of a beverage with high sensory quality, a homogeneous consistency, and enhanced nutritional value. Among the formulations studied, Formulation No. 2 demonstrated the best quality characteristics.
The results showed that the developed beverage contains proteins, fats, carbohydrates, dietary fiber, vitamins, and minerals essential for maintaining human health. The product was found to have a shelf life of up to 7 days, while its optimal quality characteristics were maintained for 36 hours.
The beverage was evaluated for food safety, and all indicators complied with the established regulatory requirements. The developed fermented milk beverage can be recommended for widespread consumption, including dietary and preventive nutrition, as well as for expanding the range of functional food products.
A utility model patent No. 11751, entitled «Fermented Milk Beverage and Method of Its Production», was obtained for the developed product.

554-565 22
Abstract

This study presents a comprehensive evaluation of a fermented milk drink (yogurt) fortified with iodine in the form of iodocasein as a promising functional product for the prevention of iodine deficiency disorders in the Republic of Kazakhstan. The relevance of the study stems from the persistent problem of iodine deficiency in the population’s diet, despite mandatory iodization of table salt, as well as the need to identify new food sources of this trace element that are traditionally consumed in the country. The objective was to study the nutritional value and microbiological parameters of the fortified product. Under laboratory conditions, iodine was added to pasteurized cow’s milk at a rate of 25 μg per serving, inoculated with strains of Streptococcus thermophilus and Lactobacillus delbrueckii subsp. bulgaricus, and subjected to fermentation and ripening. It has been established that the optimal dosage is 25 μg of iodocasein per 100 g of product. Analysis was performed according to approved state standard methods (physicochemical and microbiological parameters, iodine content). The data obtained indicate that the product fully complies with all safety requirements. Fortification did not affect the product’s technological characteristics. The developed iodized yogurt is a safe, stable, and functionally improved product capable of being effectively used in the prevention of iodine deficiency without losing its customary consumer qualities. The results obtained confirm the prospects for the industrial application of this technology in the food industry of Kazakhstan.

565-573 23
Abstract

The aim of this study was to investigate the physicochemical, mineral, and functionaltechnological properties of powder obtained from the plant Salicornia europaea collected near the village of Kumkent, Suzak district, Turkestan region, and to scientifically substantiate the possibility of its use as a natural salt substitute in food products. The results showed that the moisture content of the plant raw material was 2.61%, while the total ash content was 15.17%. Mineral composition analysis revealed the predominance of sodium (Na) (32.89%) and chlorine (Cl) (33.51%), together with Mg, Si, K and Ca elements. The powder contained 2.41% total phenolic compounds and 1.37% flavonoids. Sieve analysis showed that the main fraction ranged from 0.25 to 0.5 mm, while SEM analysis revealed a porous microstructure of the particles. The swelling coefficient was 3.2, indicating high water-binding capacity. Safety assessment confirmed that the levels of toxic elements, pesticide residues and microbiological indicators complied with regulatory requirements. Unlike our previous study, which focused on the application of Salicornia europaea as a partial salt substitute in meat chips, the present work provides a comprehensive characterization of the powder itself. In addition to confirming its mineral composition, this study presents new data on moisture and ash content, biologically active compounds, particle-size distribution, microstructure, swelling capacity and safety indicators. These findings expand the current knowledge of the functional-technological properties of Salicornia europaea powder and substantiate its potential use as a natural salt substitute and functional food ingredient. The obtained results demonstrate that Salicornia europaea powder is a promising natural salt substitute and functional ingredient for use in the food industry.

574-584 18
Abstract

This study presents the results of developing cooked poultry sausages in which wheat flour was replaced with freeze-dried germinated wheat grain powder. The aim of the study was to evaluate the effect of the plant-based ingredient on the nutritional value, physicochemical, functional-technological, structural-mechanical, and sensory properties of the final product. The control sample was produced using wheat flour, while the experimental sample contained germinated wheat powder obtained through soaking, germination, freeze-drying, and subsequent milling. The experimental sample showed an increase in protein content from 13.9% to 14.4%, ash content from 2.15% to 2.25%, and carbohydrates, including dietary fiber, from 2.6% to 3.0%, accompanied by a slight decrease in energy value. The pH and water activity values remained within technologically acceptable limits. The addition of the plant ingredient increased water-holding capacity from 108% to 120%, fat-holding capacity from 160% to 175%, and cooking yield from 93.8% to 96.1%. The sensory evaluation score of the experimental sample reached 23.6 points. The obtained results confirm the feasibility of using freeze-dried germinated wheat powder to improve the nutritional value and technological stability of functional cooked sausage products.

584-593 18
Abstract

The article presents the development of a technology for minced meat semi-finished products intended for therapeutic and preventive nutrition with anti-allergic properties. The relevance of the research is determined by the growing demand for functional food products with enhanced nutritional and biological value aimed at improving human health and reducing the risk of food-related allergic reactions. The purpose of the study was to select and scientifically substantiate formulation components for producing meat products with improved nutritional, technological, and sensory characteristics.
The study involved the analysis of animal and plant-based raw materials, including beef, poultry meat, dairy ingredients, vegetables, cereals, and natural components rich in vitamins, minerals, dietary fiber, and biologically active substances. Mathematical modeling methods were used to develop and optimize formulations of meat zrazy containing cottage cheese, rice, and fruit-vegetable components. The obtained results demonstrated that the incorporation of natural functional ingredients improves the amino acid composition, mineral content, and overall biological value of the product while maintaining high organoleptic quality. The developed meat semi-finished products can be recommended for functional and preventive nutrition.

593-600 17
Abstract

Fine grinding sets the dispersion of the raw material and, through it, the structure and waterbinding capacity of the minced mass, yet in conventional lines it is separated from preliminary grinding, which increases the number of machines and the specific energy demand. The article presents a mathematical model of the fine grinding of meat-and-bone raw materials in a combined unit where both stages run sequentially in one working space from a single drive. The model is built on the Bingham rheological body supplemented by an element describing the instantaneous irreversible deformation of bone inclusions, and is arranged as two series-connected contours. Summation of the contour shear rates gives a compact equation with equivalent (reduced) characteristics, coupled with the kinematics of the cutting mechanism, so that the power of the process is expressed through yield shear stress, cutting area, blade radius and rotational speed. Adequacy was verified against yield shear stress measured by penetration in eight runs with three replications: the calculated Fi = 0.29164 is lower than the tabulated Ftab = 1.02 at f1 = 3, f2 = 4, α = 0.1. At 16.7 s⁻ ¹ the combined unit reached 151.3 kg/h against 96.3 kg/h, 68 % of particles fell within 100–150 μm against 36 %, and specific energy consumption decreased from 31.15 to 22.14 kW·h/t.

601-608 17
Abstract

Nowadays, global urbanization and limitations in the nourishment have influence for unbalanced diet and chronic diseases. Deep processing of the secondary meat raw materials by fortification of essential compounds and inorganic elements allows for the development of new technologies of functional food products with a reduced cost value. The work purpose was a study of new chopped semi-finished products (cutlets) fortified by lentil flour in amount from 10% until 50% of total weight. For the reaching of it, following tasks were discussed: creation of technology, sensory assessment, analysis of organoleptic and physicochemical characteristics, and identifying of the macro- and microelements contents by using the scanning electron microscope and inductively coupled plasma mass spectrometer. Next meat byproducts: tongue, kidneys, heart, tripe of beef carcasses were used as secondary raw materials. Also, a domestic plant crop Lentil (Lens culinaris) was added. According to the organoleptic and sensory indicators, as the best sample containing 70% of meat secondary raw materials and 30% of lentil flour was selected. Also, it was discovered that addition of lentil flour to the recipe improves the nutritional value of cutlets by increasing content of proteins, carbohydrates, and minerals. The presence of macro- and microelements content was identified by the Mass-spectrometry method and using the Scanning Electron Microscope. It was found that protein content ranged from 17.95±1.15 to 20.93±1.25 g/100 g compared to control sample of 17.07±0.72 g/100 g. The carbohydrate content was 3.64±0.33 to 7.91±0.72 g/100 g compared to control sample of 3.09±0.30g/100 g. The studied samples have mineral components such as sodium (16.68-23.45 %), magnesium (0.89-2.15%), phosphorus (5.09-9.48%), potassium (8.14-13.50%), and calcium (0.75-2.25%). The developed semi-finished meat product fortified by lentil flour can be offered as a functional food product enriched by proteins, minerals, and vitamins.

609-617 10
Abstract

The present study was aimed at improving the formulation and production technology of goat milk yogurt through the replacement of refined sugar with natural sweeteners. Four formulations were prepared: a control sample containing sucrose and experimental samples containing Jerusalem artichoke extract, erythritol, or stevia extract. Yogurt was produced by a controlled fermentation process, and its organoleptic and physicochemical characteristics were evaluated. The experimental samples showed physicochemical properties comparable with those of the control. Total solids ranged from 15.4 to 15.7%, titratable acidity from 93 to 106 °T, pH from 4.5 to 4.7, fat from 4.0 to 4.3%, lactose from 4.5 to 4.8%, and protein from 3.3 to 3.5%. The addition of natural sweeteners affected sensory characteristics without adversely affecting fermentation or the main quality indicators. The Jerusalem artichoke sample had a caramel-like flavour and brownish colour, the erythritol sample had a refreshing sweet taste, and the stevia sample had a sweet taste with slight sourness. The results demonstrate that refined sugar can be replaced with selected natural sweeteners in goat milk yogurt while maintaining the required physicochemical and organoleptic characteristics. The developed formulations may be used as a basis for producing fermented dairy products with reduced added sucrose and improved sensory diversity.

ТЕХНИЧЕСКАЯ ФИЗИКА И ТЕПЛОЭНЕРГЕТИКА

618-626 18
Abstract

Heat loads for porous coatings of natural materials were studied as a function of their properties. From 26 investigated combustion chambers and nozzles, a device was selected and a powder-and-thermite feed scheme was developed for spraying onto metallic surfaces. Coatings were deposited at an oxidizer excess coefficient α < 1, with fuel afterburning occurring at the coating surface via supersonic pulsating hightemperature detonation jets issuing from the combustion chambers and nozzles. Specific heat fluxes at the coating surface were at least twice as high as those from conventional jets. The detonation phenomenon simultaneously acts as a hardening technology for coating formation. Structural spinning detonation consisting of seven zones was observed; the transverse velocity inclination angle approached 45°, and the velocity magnitude was close to the detonation velocity. Pressure oscillation frequency at the coating surface was approximately 200 Hz. Porous surfaces exhibited higher critical loads and were well controllable in limiting regimes. Thermotechnical evaluation confirmed their advantages over conventional systems. A model of detonation wave interaction with the coating was developed and coating temperature was determined.

626-633 16
Abstract

The article analyzes the structure of scientific understanding of the risks of integrating renewable energy sources. Based on a bibliometric analysis of 4823 publications of Web of Science database (2015-2025) identified three stable thematic clusters and demonstrated the dominance of the system optimization paradigm under uncertainty. The scientific novelty of the study lies in the development of a system relevance index-a metric for quantitatively ranking risk mitigation strategies based on the topology of a bibliometric network; a gap between scientific priorities and investment practice was identified: for a number of technologies, it reaches +0.6 on a normalized scale. A dynamic analysis of publications over three time periods (2015-2018; 2019-2021; 2022-2025) recorded a shift in the research agenda from regulatory approaches to engineering management of systemic risks. It is shown that grid-forming inverters and machine learning algorithms occupy a central position in the scientific field, ahead of market adoption by 5-10 years, which indicates promising areas for investment policy.

633-643 14
Abstract

The work presents a comprehensive study of the formation processes, structure, phase composition, and performance properties of oxide coatings produced on the AMG6 aluminum alloy by the micro-arc oxidation method. The treatment was carried out using a laboratory setup equipped with a pulsed power supply and a temperature control system, ensuring stable electrical and thermal regimes. The use of silicate-alkaline electrolytes of various compositions made it possible to purposefully control the morphology and properties of the coatings. Scanning electron microscopy and energy-dispersive analysis revealed the formation of multilayer oxide coatings with a dense inner barrier layer and a well-developed porous outer layer. The coating thickness ranged from 27-33 μm. X-ray diffraction analysis confirmed the formation of crystalline modifications of aluminum oxide and the aluminosilicate phase mullite under energy-intensive processing conditions. Tribological tests demonstrated that the different MAO regimes provide distinct functional advantages. The Al-3 coating exhibited the lowest coefficient of friction (0.45-0.50), whereas the Al-1 coating showed the smallest wear area. Electrochemical measurements further demonstrated that Al-1 exhibited the highest corrosion resistance, characterized by the lowest corrosion current density among the investigated coatings. These results indicate that the optimal MAO regime should be selected according to the specific tribological and corrosion requirements of the intended application.

643-663 18
Abstract

This paper presents a review of recent studies devoted to the hydrodynamic and thermophysical aspects of irrigation and spraying devices operating in technical systems. The aim of the study is to systematize current knowledge on the influence of design, hydrodynamic, and thermophysical parameters of irrigation devices on spray characteristics and the efficiency of heat and mass transfer processes. The main factors governing spray formation are considered, including operating pressure, liquid flow rate, nozzle geometry, atomizer type, droplet size and velocity, spray cone angle, liquid distribution uniformity, and properties of the working medium. It is shown that the efficiency of irrigation devices is determined not only by flow rate and pressure but also by the structure of the droplet flow and the conditions of its interaction with the surrounding gas medium, packing elements, or heat-transfer surfaces. Particular attention is paid to spray cooling, where heat transfer intensity depends on droplet size distribution, irrigation density, nozzle position, surface condition, and heat transfer regime. For cooling towers and evaporative systems, uniform water distribution is identified as one of the key factors affecting heat and mass transfer performance. The capabilities of CFD modeling for investigating internal nozzle flow and spray cone formation are also discussed. It is concluded that the optimization of irrigation devices should be based on the integrated consideration of hydrodynamic, thermophysical, and operational parameters during their design and application.

663-670 21
Abstract

The study investigated the effect of γ-irradiation on the adsorption properties of silicon dioxide. Spectral and temperature dependencies of gamma-adsorption of oxygen on SiO2 were determined, the influence of irradiation on the state of the hydroxyl layer was examined, the correlation between paramagnetic and adsorption centers was revealed, and the role of impurities in radiation adsorption was established. γ-irradiation in vacuum changes the appearance of the IR spectrum: the intensity of isolated and hydrogenbonded hydroxyl groups (3750, 3605 cm⁻¹) decreases, while new bands (1555, 1520, 1380 cm⁻¹) appear in the region of water deformation vibrations. Introducing oxygen onto γ-irradiated SiO2 (irradiation dose 24 kGy) causes a decrease in the intensity of the 3750 cm⁻¹ band. At the same time, a slight shift of the absorption maximum toward lower frequencies by several cm⁻¹ is observed.
In the study of IR spectra of γ-irradiated SiO2, it was established that γ-irradiation induces processes of dehydroxylation and dehydration. During γ-adsorption of oxygen, along with other forms of adsorption, radiolysis of residual organic matter occurs, resulting in the formation of various formate-like compounds as well as water.
Preliminary activation of the SiO2 surface was carried out at temperatures of 200, 400, 600 and 800°C. The temperature dependence of the adsorption capacity of SiO2 shows a minimum in the calcination range of 400-600°C. With increasing preliminary calcination temperature, both the rate of gamma-adsorption and the total amount of adsorbed oxygen increase. At these temperatures, IR spectroscopy data indicate the destruction of hydroxyl groups.
Thermodesorption studies reveal that maxima in gas release rates are observed at 100-120°C and 200-400°C, indicating the presence of several types of adsorption centers. The first maximum is usually attributed to H-centers, while the second corresponds to coordination centers.
The dose dependence of the EPR spectrum of SiO2 follows a regular pattern: the intensities increase with rising dose while the signal shape remains unchanged.
Oxygen adsorption on pre-irradiated SiO2 increases the number of paramagnetic centers, which provides grounds to conclude that oxygen adsorption also occurs in a radical form.
The temperature dependence of paramagnetic centers shows a pronounced maximum at 400°C. Up to 120°C, the paramagnetic centers on SiO2 are almost not annealed. At 240°C, however, the paramagnetic centers are completely annealed. This behavior highlights the thermal stability range of different adsorptionrelated centers and confirms the radical nature of oxygen interaction with γ-irradiated silica.

670-678 16
Abstract

The study addresses radiation safety in the long-term storage of spent nuclear fuel (SNF) from the BN-350 reactor. The fuel is characterized by a complex isotopic composition and a high level of residual activity. The aim of this work is to evaluate the radiation environment under various accident scenarios involving damage to protective and internal structural elements of a spent nuclear fuel (SNF) storage container.
The study employs three-dimensional Monte Carlo modeling methods. In addition, a scenario-based analysis of container failure is performed, including local damage to the walls and internal components, fuel redistribution, and fuel pellet fragmentation. Dose rate and gamma-ray flux density calculations were carried out with consideration of all scattering and absorption processes.
The simulation results show that damage to the internal structures of the container leads to a multiple increase in the dose field along the container height and at a certain distance from it, as well as pronounced gamma-ray anisotropy and local dose rate peaks. This emphasizes the importance of maintaining the integrity of internal components for radiation safety.
The findings of this study can be applied to radiation risk assessment, development of container condition monitoring regulations, and planning of personnel protection measures during long-term storage of BN-350 spent nuclear fuel (SNF).

679-686 19
Abstract

This study presents a comprehensive comparative evaluation of the performance characteristics of commercial coated cemented carbide turning inserts of different grades after turning operations. The wear mechanisms of the cutting edge were investigated using scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS). In addition, the mechanical properties of the coatings, including microhardness and elastic modulus, were determined by instrumented indentation, while their adhesion strength was evaluated using the progressive scratch test. The results revealed that the coating failure was governed by a combination of abrasive and adhesive wear mechanisms, accompanied by localized edge chipping, crater formation, and material transfer from the workpiece onto the tool surface. The highest microhardness values (2258-2261 HV) were obtained for the YBC252 series inserts, which correlated with a lower degree of coating degradation after machining. Scratch test results demonstrated that coatings with higher hardness exhibited greater resistance to mechanical failure and superior adhesion strength. The comprehensive analysis established a clear relationship between the mechanical properties of the coatings, their wear mechanisms, and the service performance of commercial cemented carbide turning inserts.

687-702 17
Abstract

The reliability of electronic equipment (EE) is a critical parameter in the aviation, space, medical, and telecommunications industries, where failures have serious economic and safety consequences. Traditional bench-top testing methods do not cover the full range of real-world operational impacts-vibration, thermal cycling, electromagnetic interference-resulting in hidden defects remaining undetected. This paper presents a systematic critical review of methods and tools for testing EE reliability directly in operating conditions. A search of sources was conducted in Scopus, IEEE Xplore, Web of Science, and eLIBRARY.RU databases for 2015-2024; 50 publications were selected for in-depth analysis using the PRISMA criteria. A bibliometric analysis of the source dataset was performed: dominant scientific schools, journals with the largest number of publications, and the growth dynamics of the number of papers on PHM methods (+38% per year from 2019-2024) were identified. Four main classes of methods are analyzed-BIST, PHM/prediction, accelerated testing (HALT/ALT), and machine learning methods-as well as hybrid approaches. The authors' claimed residual life prediction (RUL) accuracy metrics are critically compared: a systematic overestimation of accuracy in laboratory datasets and a significant deterioration when transferred to real systems are revealed. Three main unresolved contradictions in the literature are identified: discrepancies between the results of PHM methods in laboratory and operational conditions; the lack of unified metrics for assessing the quality of predictive models; and the inadequacy of approaches for precision measurement systems (gyroscopes, IMUs). Recommendations for further research are formulated.

702-714 21
Abstract

The article presents a comprehensive approach to assessing the efficiency of implementing intelligent heating networks (Smart Heating Network, SHN) in district heating systems using the East Kazakhstan region as a case study. The object of the study is the heat supply system of JSC «Shygys Zhylu», characterized by a high level of infrastructure wear and significant heat losses. The condition of pipelines, as well as hydraulic and temperature regimes, were analyzed, and the main causes of inefficiencies in heat energy transportation were identified. A concept for implementing SHN based on the use of digital sensors, automated heat substations, and predictive control is proposed. The results show that the application of SHN ensures adaptation of heat supply modes to variable loads, reduction of heat losses, and improvement of system efficiency. The technical and economic feasibility of implementing digital solutions is substantiated. It is demonstrated that the integration of intelligent control allows achieving heat energy savings of 15-30%. The practical significance of the study lies in the development of recommendations for the modernization of district heating systems.

715-722 20
Abstract

Safe conditioning and long-term storage of solid radioactive waste are among the key challenges associated with the decommissioning of nuclear facilities. The aim of this study was to determine the optimal filling degree of a cement matrix using a solid radioactive waste simulant representing waste generated during the decommissioning of the BN-350 reactor. Cement compounds containing 15, 25, and 40 wt.% of the solid radioactive waste simulant were prepared and investigated. The physicomechanical properties of the samples were evaluated through microhardness measurements, compressive strength testing, and analysis of fracture behavior. The results demonstrated that the simulant content has a significant effect on the structural state and mechanical performance of the cement compounds. The highest values of microhardness and compressive strength were obtained for the composition containing 15 wt.% simulant, indicating the formation of a more homogeneous and mechanically durable cement matrix. Increasing the simulant content to 25 wt.% resulted in a moderate decrease in mechanical properties; however, the obtained values remained within the range required for cemented radioactive waste forms. At a simulant content of 40 wt.%, a substantial reduction in mechanical strength and deterioration of the structural integrity of the cement compound were observed. The obtained results can be used for optimizing the composition of cement matrices intended for the immobilization of solid radioactive waste and for improving the efficiency of radioactive waste conditioning technologies.

723-731 21
Abstract

This study investigated the density of TiO2/sunflower oil nano-oils at nanoparticle mass concentrations of 2, 4, 6, and 8 wt.% over a temperature range of 20-60°C. The samples were prepared using a solventdispersion method: TiO2 nanoparticles were introduced into a sunflower oil–hexane system, mixed on a magnetic stirrer, then ultrasonically dispersed for 30 minutes at 30% power, and the hexane was removed using a rotary evaporator. Density was measured using a DIGIPOL-D50 digital density meter. Five repeated measurements were performed at each temperature point, which improved the reliability of the results and allowed the reproducibility of the experiment to be assessed. It was found that increasing the mass concentration of TiO2 increased the density of the nano-oil, whereas increasing temperature led to a gradual decrease in density. At 20 °C, the density increased from 917 kg/m3 for 2 wt.% to 974 kg/m3 for 8 wt.%. This trend is explained by the higher intrinsic density of TiO2 nanoparticles compared with the base vegetable oil. The temperature dependences were described using a linear regression model, ρ = a + bT; for the 6 and 8 wt.% samples, the coefficient of determination was R2 = 0.98462. Comparison with the Pak–Cho model showed that the deviation increased with increasing TiO2 content: MAPE rose from 6% to 22%. The obtained data can be used in the design of heat-exchange systems where accurate information on the density of working fluids is required. This is particularly important when selecting the nano-oil composition and predicting its behavior under real operating conditions.

732-741 20
Abstract

The limiting heat loads for a cooling system with natural material coatings were studied as a function of oxidizer excess ratio, thermal tool characteristics, and material properties. The study is applicable to materials operating with and without surface melting (tuff, marble). The thermal tool and powder deposition conditions were selected, and a displacement-type fuel supply scheme with corresponding experimental conditions was developed. Coating deformation and failure processes were analyzed by holography. The detonation jet flame structure was recorded; the oxidizer excess coefficient at the obstacle was below unity, causing fuel afterburning and up to 6-fold intensification of particle deposition. Specific heat fluxes at the coating surface reached (5÷12) MW/m² along the jet axis at 4×10⁻² m from the nozzle exit. Protective screens against hightemperature detonation jets were developed to prevent coating failure. Equal-deformation interference fringes revealed differing deflections for tuff and marble coatings. Failure was demonstrated in a coating where a cavity of 2.5×10⁻³ m formed within 2.2 s at a limiting heat flux of 1.2×10⁶ W/m². Holographic studies simulate the potential coating degradation process and enable service life prediction.

741-748 16
Abstract

This article presents a study of the effect of plasma hardening parameters on the structure and properties of grade 65G steel. The effectiveness of plasma treatment in obtaining a hardened surface layer through localized high-speed heating followed by self-cooling of the material was demonstrated. The studies were conducted at plasma arc currents ranging from 130 to 150 A and plasma-forming gas flow rates of 0.22-0.25 L/min, which made it possible to evaluate the influence of the technological parameters on the characteristics of the resulting layer. The structural and phase composition were analyzed using X-ray diffraction and scanning electron microscopy, while the mechanical and tribological properties of the steel were evaluated using a hardness tester and a tribometer. A comparative study of the properties of 65G steel in the initial state and after plasma surface hardening was carried out. The obtained results indicate that plasma quenching promotes the formation of a gradient microstructure consisting of martensite and retained austenite, with a gradual transition to the initial structure of the material. The maximum microhardness of the hardened layer reaches 670-700 HV0.1. At the same time, the wear rate of the treated layer decreases by 5-6 times compared to the initial state. The results of the study confirm the potential of plasma quenching as a method for surface hardening of 65G steel.

748-754 19
Abstract

Improving heat dissipation efficiency while maintaining acceptable rheological characteristics is one of the main requirements for vegetable oil-based nanofluids. In the present study, a comparative investigation of the effects of TiO2 and Al2O3 nanoparticles on the thermal conductivity and kinematic viscosity of sunflower oil was carried out. Nanoparticle mass concentrations of 4 and 8 wt.% were considered within a temperature range of 293-323 K. It was established that the addition of both types of nanoparticles increased the thermal conductivity of the base fluid, with TiO2 providing a more pronounced effect. For 4 wt.% TiO2, the relative increase in thermal conductivity was 8.2-8.5%, whereas for Al2O3 at the same concentration it was 6.1-6.4%. At a concentration of 8 wt.%, the corresponding increases were 14.0-14.3% and 12.0-12.4%, respectively. At the same time, the addition of nanoparticles was accompanied by an increase in kinematic viscosity. The most significant increase was observed for 8 wt.% Al2O3 and amounted to 95-97%, whereas for 8 wt.% TiO2 it was within the range of 64-65%. The obtained results show that, under the investigated conditions, TiO2 provides a more favorable combination of thermal conductivity enhancement and viscosity characteristics compared with Al2O3. The observed difference was considered in terms of interfacial layer formation, nanoparticle mobility, and the characteristics of nanoparticle aggregation in the oil medium.

754-765 19
Abstract

The processing of solid metallic radioactive waste (SRW) generated during the decommissioning of nuclear facilities is an important task that can reduce the volume of waste requiring disposal. This paper presents the results of a study on the feasibility of applying electroslag remelting (ESR) to process solid metallic radioactive waste from the BN-350 reactor. The experiment was conducted using an ESR facility previously tested for the decontamination of steel flame tubes from the IVG.1M research reactor. A fragment of a 12Cr18Ni10Ti steel tube with dimensions of Ø50×5 mm was used as a surrogate for one of the BN-350 SRW samples. Prior to the experiment, the facility was prepared, the consumable electrode was positioned, and a molten slag bath was formed. During remelting, the electrical parameters of the facility were recorded to analyze the characteristics of the process. As a result, 2.3 kg of metal was remelted, producing a cylindrical ingot approximately 60 mm in diameter. Analysis of the recorded current and voltage values showed that process instability at the initial stage was associated with short circuits between the electrode and the copper mold of the crystallizer. The short circuits were caused by the small annular gap and an insufficient amount of flux within this gap. The results demonstrated that the existing facility configuration enables the remelting of tubular metallic components; however, the geometric dimensions of the processed samples are limited by the crystallizer parameters and the required annular gap. Processing SRW samples of different sizes and shapes therefore requires the development of crystallizers with appropriate geometric and design parameters.

CHEMICAL TECHNOLOGY (ORIGINAL ARTICLE)

766-776 21
Abstract

To obtain active copper catalysts for the electrochemical reduction of CO2 (CO2RR) in a controlled manner, the nucleation and growth mechanisms of copper electrodeposition in a lactic acid-sodium dodecyl sulfate (SDS) medium were investigated. Electrochemical studies were carried out using cyclic voltammetry and chronoamperometry methods. Copper deposits were obtained from a solution of 0.04 M CuCl2 + 3 M C3H6O3 + 0.14 M SDS (pH 4.0) on a glassy carbon electrode at a potential of –0.35 V and a temperature of 60 °C. A negative shift in the deposition potential from –0.15 V to –0.35 V accelerates the formation of nucleation centers and leads to a decrease in particle radius from 12.57 to 1.34 μm.
Structural and morphological analysis showed that the obtained copper deposits form a polyhedral structure and are characterized by a predominant Cu(111) crystallographic orientation. In a CO2-saturated 0.5 M NaHCO3 solution, these copper deposits provided a higher cathodic current density for CO2RR compared to a polycrystalline commercial copper electrode. The results of electrochemical impedance spectroscopy (EIS) showed that a decrease in charge transfer resistance from 107.8 to 36.5 Ω·cm2 indicates facilitated charge transfer at the electrode/electrolyte interface on the surface of nanostructured copper. Thus, copper deposits with a tunable structure obtained by electrodeposition in a lactic acid-sodium dodecyl sulfate medium can be considered as low-cost and promising electrocatalysts for the electrochemical reduction of CO2.

776-784 20
Abstract

Species of the genus Cirsium are considered promising sources of biologically active compounds and attract considerable interest in phytochemical and pharmacognostic research. Among them, Cirsium vulgare and Cirsium arvense are widely distributed in Kazakhstan and have traditionally been used in folk medicine. Previous studies have reported the presence of phenolic compounds, fatty acids, vitamins, and other secondary metabolites in representatives of this genus; however, comparative phytochemical data for these species remain limited.
The aim of the present study was to perform a comparative analysis of physicochemical characteristics and biologically active compounds in aqueous-ethanolic extracts of Cirsium vulgare and Cirsium arvense. Fatty acid composition was determined by gas chromatography with flame ionization detection, total phenolic compounds were evaluated spectrophotometrically using the Folin-Ciocalteu method, and vitamin C content was analyzed by high-performance liquid chromatography. In addition, moisture content and total ash values of the plant material were determined according to standard analytical procedures.
The obtained results demonstrated noticeable differences in the phytochemical composition of the studied species. In total, twenty-one fatty acids were identified in the extracts. Cirsium arvense was characterized by a higher content of linolenic acid and vitamin C, whereas Cirsium vulgare contained increased amounts of total phenolic compounds together with linoleic, eicosenoic, and palmitic acids. Similar differences in the accumulation of biologically active compounds may be associated with species-specific metabolic features and environmental conditions.
The present study expands current information on the phytochemical composition of local representatives of the genus Cirsium. The obtained results may be considered as preliminary comparative data for further pharmacognostic, phytochemical, and applied investigations related to medicinal plant raw materials and biologically active compounds.

785-796 16
Abstract

The article presents the results of a comprehensive study of the thermodynamic and electrophysical properties of the LaSrCuVMnO7.5. compound. The temperature dependence of the heat capacity was investigated in the range 298.15–673 K using a serial IT-C-400 calorimeter. Polynomial equations describing the Cp(T) dependence were derived with consideration of the observed thermal anomalies. The experimental results revealed λ-shaped anomalies near 373 and 523 K, which may be associated with possible secondorder phase transitions or thermally activated structural rearrangements. Based on the ionic increment method, the standard entropy was estimated, and the temperature dependences of the thermodynamic functions H°(T) - H°(298.15), S°(T), and Φ**(T) were calculated.
The electrophysical properties of LaSrCuVMnO7.5., including dielectric permittivity and electrical resistance, were studied using an LCR-781 meter (Taiwan) at frequencies of 1, 5, and 10 kHz under dry air conditions in a thermostatically controlled режиме. A pronounced change in the electrical characteristics was observed in the high-temperature region above ~413 K, indicating possible changes in charge transport and polarization mechanisms, which may be related to structural or phase transformations in the material.
The obtained results provide important thermodynamic and electrophysical data for understanding the behavior of the LaSrCuVMnO7.5. compound and may serve as a basis for further modeling of its functional properties and certification of the synthesized material.

796-804 16
Abstract

Deep Eutectic Solvents (DES) are a new generation of systems widely used in green chemistry and sustainable development due to their environmental safety, low toxicity, and the ability to tune their physicochemical properties in a targeted manner. The aim of this work is to synthesize DES systems based on glycerol and to comprehensively study the effect of component nature and molar ratio on their physicochemical, spectral, and thermal characteristics.
During the study, a total of 7 eutectic systems were synthesized based on glycerol-citric acid (1:1-1:4) and glycerol-malonic acid (1:2-1:4). The 1:2 molar ratio showed a favorable balance between viscosity and thermal stability. The density ranges from ρ = 1.30-1.36 g/cm³, and the viscosity (at 25 °C) varies in the range η = 550-1100 mPa·s.
IR spectra showed the formation of strong hydrogen bonds, as evidenced by a shift of the hydroxyl band by Δν = -30…-70 cm⁻¹ toward lower wavenumbers.
TGA/DTG/DSC studies revealed that the highest thermal stability was exhibited by the glycerol–citric acid 1:2 system (Tonset = 230 °C). Compared with the corresponding pure acids, the melting temperature decreased by ΔTm = -114…-125 °C, confirming the formation of eutectic systems.

804-812 24
Abstract

The aging of bitumen during production and service life leads to the formation of oxygencontaining functional groups, increased stiffness, and deterioration of pavement performance. Therefore, the development of effective and environmentally friendly rejuvenators for restoring aged bitumen remains an important task in asphalt recycling technologies.
In this study, a bio-based rejuvenator was synthesized using oleic acid and imidazoline and applied to RTFOT-aged BND 70/100 bitumen at concentrations of 1, 3, and 5 wt.%. The influence of the rejuvenator on the properties of aged bitumen was evaluated using Fourier-transform infrared spectroscopy (FTIR), thermogravimetric analysis (TG), and conventional physical tests.
FTIR analysis revealed changes in the intensity of carbonyl and sulfoxide absorption bands, indicating interaction between the rejuvenator and the aged bitumen matrix. TG analysis showed that the modified binders maintained high thermal stability up to 400 °C. The addition of the rejuvenator improved the physical properties of aged bitumen by increasing penetration and ductility while reducing the softening point. The most significant effect was achieved at a rejuvenator content of 5 wt.%.
The results demonstrate the potential of the developed bio-based rejuvenator for restoring the performance characteristics of aged bituminous binders and enhancing the sustainability of asphalt recycling technologies.

813-822 23
Abstract

This study investigates the feasibility of using modified lignosulfonates as flotation reagents for the selective beneficiation of ilmenite ore from the Satpayev deposit (Kazakhstan). The raw ore was characterized by a high content of silicate gangue minerals (SiO₂ – 71.5%) and a relatively low TiO₂ content (6.8%), which necessitates the use of selective collectors. Three series of modified lignosulfonates were synthesized: deeply sulfonated (LS-S), peroxide-oxidized (LS-O1), and permanganate-oxidized (LS-O2). The reagents were characterized by FTIR spectroscopy, surface tension measurements, and ζ-potential analysis.
The highest flotation performance was achieved with the LS-O2 reagent obtained by permanganate oxidation of sodium lignosulfonate. This reagent exhibited the maximum recovery and selectivity, the most negative ζ-potential (-31 mV), and the lowest surface tension (40.9 mN/m). The effects of pulp pH, reagent dosage, and temperature on the flotation efficiency of ilmenite were investigated. The optimal process conditions were determined as follows: pH 7.5, LS-O2 dosage of 0.25 kg/t, and temperature of 30°C. Under these conditions, an ilmenite recovery of 73.4%, TiO₂ content in the concentrate of 20.8%, and selectivity of 81.0% were achieved.
The obtained results demonstrate the promising potential of modified lignosulfonates as effective and relatively cost-efficient reagents for the flotation beneficiation of low-grade ilmenite ores.

823-832 19
Abstract

Acute respiratory viral infections (ARVIs) represent one of the most prevalent infectious diseases worldwide, with the COVID-19 pandemic further highlighting the critical need for novel therapeutic alternatives. Recent in vitro studies demonstrated inhibitory activity of Artemisia annua L. ethanolic extracts against SARS-CoV-2 through synergistic multi-component mechanisms. This study aimed to develop a standardized medicated caramel lozenge based on bioactive extracts of Artemisia annua L. using isomalt as the pharmaceutical base, in compliance with the State Pharmacopoeia of the Republic of Kazakhstan (SP RK). Raw material was collected during peak flowering in July-August 2025 at the Ile Alatau foothills, Almaty region, Kazakhstan. Physicochemical characterization confirmed mass loss on drying of 6.5%, extractive substance content of 40.2%, and complete absence of heavy metals by atomic absorption spectrometry. Essential oil yield was 0.4% (v/w, dry basis), with 1,8-cineole constituting 8.6% by gas chromatography-mass spectrometry (GC-MS). GC-MS profiling of the ethanolic extract identified more than 50 bioactive compounds, with Camphor (9.35%) and 1,8-cineole (8.60%) as predominant constituents. The detection of Squalene, a triterpene hydrocarbon with antimicrobial, antifungal, and immunostimulatory properties, is of particular significance. The optimal 1:2 extract-to-isomalt ratio produced a thermally stable, ethanol-free, diabetic-compatible dosage form meeting all five SP RK standardization parameters: organoleptic properties, mass uniformity (average mass 1.7084 g; maximum deviation <0.05%), disintegration (<10 min), and water content (<2.0%). The developed formulation represents a stable and accessible alternative to tincture-based delivery, suitable for pediatric, elderly, and diabetic populations.

832-839 19
Abstract

The article presents the results of a study on the carbonate-hydrothermal activation of a mixture of nepheline ore and red mud as an effective method of preliminary mineralogical preparation of aluminosilicate raw materials prior to alkaline leaching. The relevance of the work is determined by the need to improve the efficiency of integrated processing of natural and technogenic raw materials in order to increase aluminum recovery and regulate potassium behavior in alkaline systems. The effect of treating a nepheline ore–red mud mixture at a mass ratio of 1:1 with a sodium bicarbonate solution at 260°C was investigated. It was established that significant mineralogical transformations occur during activation, accompanied by the formation of secondary phases, including approximately 19 wt.% cancrinite and 2.8 wt.% boehmite, indicating partial recrystallization of the initial aluminosilicates. For further processing of the activated material, a two-stage alkaline leaching scheme with calcium addition was proposed, providing selective potassium removal at the first stage and intensive aluminum extraction at the second stage. The mineralogical transformations were shown to enhance the reactivity of the material and alter the distribution of major components between the solid and liquid phases. The achieved alumina extraction rate reached 92-94%, while potassium removal attained 82-87%. The obtained results confirm the close relationship between phase transformations and the efficiency of valuable component recovery, providing a scientific basis for improving technologies for the integrated production of alumina from complex aluminosilicate materials and industrial wastes.

839-848 18
Abstract

The formation behavior of boron carbide in the B₂O₃–Al–C and B₂O₃–Mg–C systems during mechanochemical and self-propagating high-temperature synthesis (SHS) was investigated. Mechanochemical treatment of the B₂O₃–Al–C system was carried out in a planetary ball mill at rotational speeds of 350-500 rpm, treatment times of 30-90 min, and ball-to-powder mass ratios (BPR) of 10-30. Mechanical activation was found to promote particle size reduction and structural modification of the powder mixture, as well as solid-state transformations accompanied by the formation of boroaluminate, oxide, and carbide phases. X-ray diffraction analysis of the product obtained at 450 rpm, a treatment time of 30 min, and BPR = 20 revealed the presence of the B₄C phase along with Al₁₂B₆O₃₆, Al₂O₃, residual Al, and an Al–Ccontaining phase.
During SHS, the nature of the metallic reducing agent was found to have a significant effect on the combustion parameters and phase formation. For the B₂O₃–Al–C system, the combustion-front temperature ranged from 2640 to 2750 °C, with a propagation velocity of 6.0-8.9 mm/s, whereas in the B₂O₃–Mg–C system, the temperature reached approximately 3000 °C and the front velocity reached 10.9 mm/s. The maximum B₄C content in the investigated products was 4 wt.% for the aluminothermic system and 5 wt.% for the magnesiothermic system. In addition to B₄C, oxide and borate phases were formed in the SHS products, with their composition being determined by the nature of the reducing agent. The possibility of subsequently isolating boron carbide from the multicomponent products by selective chemical treatment was demonstrated. The obtained results indicate that combining mechanical activation with metallothermic SHS is a promising approach for the controlled formation of B₄C-containing materials.

849-857 12
Abstract

The increasing accumulation of technogenic waste generated by the metallurgical industry necessitates the development of effective approaches for its reuse in construction materials. This study investigates the feasibility of utilizing lead production waste as a technological additive in Portland cement manufacturing. Lead production waste obtained from Standard Steel KZ LLP (Shymkent, Kazakhstan) was used as the research material.
The chemical and phase compositions of the investigated materials were characterized using X-ray fluorescence (XRF) and X-ray diffraction (XRD) analyses. In addition, the effect of the additive on clinker grinding, cement stone microstructure formation, and the mechanical properties of cement was evaluated.
The results demonstrated that the investigated waste contains mineral components capable of participating in hydration and structure-forming processes within the cement system. The most significant positive effect was observed at a 10% additive content, which resulted in an increase in the specific surface area of the cement and improved compressive strength.
The findings indicate that lead production waste can be considered a promising secondary raw material for cement technology from both environmental and technological perspectives.

858-874 14
Abstract

In this review, modern approaches to the green synthesis of silver nanocomposites are discussed, along with the main types of sorbents, their modification methods, and prospects for biomedical applications. Silver nanoparticles (AgNPs) are among the most promising classes of nanomaterials due to their pronounced antibacterial, anti-inflammatory properties. However, conventional physical and chemical methods of their synthesis involve the use of toxic reagents, high temperatures, and significant energy consumption, which limits their environmental sustainability and practical applicability.
In recent years, green synthesis approaches based on the use of plant extracts, microorganisms, and natural biopolymers have been actively developed. Bioactive plant compounds, including polyphenols, flavonoids, terpenoids, sugars, and proteins, act as natural reducing agents and simultaneously serve as stabilizing agents during the formation of silver nanoparticles.
Particular interest lies in the immobilization of AgNPs on various sorbent materials, which allows the reduction of particle aggregation, improves their colloidal stability, and ensures controlled release of silver ions. Silver nanocomposites based on sorbents demonstrate high potential for applications in wound dressings, local drug delivery systems, diagnostic sensors, and antibacterial materials.
The obtained results indicate that the use of green synthesis methods and sorbent matrices enables the development of environmentally safe and functionally active nanomaterials with enhanced biomedical properties.

874-893 23
Abstract

This article presents a review of current cold atmospheric plasma (CAP) capabilities for water treatment. The relevance is associated with water pollution by persistent anthropogenic substances – pharmaceutical compounds, antibiotic resistance genes (ARGs), microplastics, heavy metal ions, and synthetic dyes. The physicochemical mechanisms of CAP action are considered: generation of reactive oxygen and nitrogen species (RONS), UV radiation, pulsed electric fields, electrohydraulic cavitation, as well as the concept of plasma-activated water. The main reactor configurations – dielectric barrier discharge (DBD), atmospheric pressure plasma jet (APPJ), and electrohydraulic discharge (EHD) – are described along with their comparative characteristics. The effectiveness of CAP is analyzed for four pollutant classes. For antibiotics and ARGs, the removal degree reaches 72-99% and higher; for microplastics, surface oxidation and agglomeration with simultaneous degradation of sorbed pollutants are shown; for heavy metals, decomplexation of organometallic complexes followed by precipitation; for synthetic dyes, decolorization exceeding 95%. It should be emphasized that for heavy metals and microplastics, CAP predominantly provides transformation of the pollutant's chemical form and aggregate state, whereas its actual removal from water is achieved at subsequent stages of sedimentation, coagulation, or filtration; irreversible destruction down to mineralization is characteristic mainly of organic pollutants (antibiotics, dyes). A comparative analysis of CAP with conventional methods (chlorination, ozonation, UV, biological treatment) is performed. It is shown that the main advantage of CAP is its synergistic multi-factor mechanism, which enables simultaneous degradation of heterogeneous pollutants in complex aqueous matrices, unattainable with single-mechanism conventional methods.

893-904 17
Abstract

This review systematizes recent open-access data on the degradation of polyolefins, with emphasis on polypropylene (PP) and polyethylene (PE) and on the differences between virgin and secondary materials during ageing, processing, and reprocessing. The analysis covers photo-oxidative, thermo-oxidative, and thermomechanical pathways and relates them to changes in molecular architecture, molecular weight, melt rheology, thermal stability, and mechanical performance. It is shown that polypropylene degrades predominantly through chain scission because tertiary carbon atoms are highly reactive; as a result, the average molecular weight decreases and the melt flow index usually increases. Polyethylene exhibits a more complex scenario in which chain scission competes with branching and partial cross-linking, causing nonlinear viscosity behavior and a higher risk of embrittlement at advanced oxidation stages. Comparative data indicate that recycled PE and PP generally lose tensile strength, impact resistance, and elongation at break relative to virgin grades, although properly selected blend composition, antioxidant stabilization, and rheologybased quality control can significantly improve recyclate performance. The practical conclusion is that recycled polyolefins should be evaluated using mechanism-based diagnostics, including Fourier-transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), size-exclusion chromatography (SEC), oxidation induction temperature (OIT), and rheological criteria, rather than relying on a single processing parameter.

904-914 17
Abstract

East Kazakhstan region possesses significant reserves of bentonite clays from the Tagan deposit, which are characterized by high sorption capacity and the ability to effectively remove heavy metal ions from mine waters of the mining industry down to the permissible concentration level for fisheries. However, the use of bentonite increases the turbidity of treated water, which limits its practical application in water bodies.
To address this issue, water-soluble polyelectrolytes (WSP) – cationic (Zetag-89) and anionic (Magnoflok-156) derivatives of polyacrylamide – are proposed as flocculants. Sequential introduction of cationic and anionic WSP leads to the formation of primary and secondary flocs with enhanced compaction. This accelerates sedimentation and reduces turbidity while maintaining high efficiency of heavy metal sorption. The scientific novelty of the study lies in the development of next-generation organo-mineral composite materials that combine natural minerals and synthetic polymers. Such materials enable deep purification of industrial waters and minimize side effects associated with natural sorbents. The practical significance of the research consists in the possibility of implementing the proposed technology for comprehensive mine water treatment, which meets modern environmental protection requirements and supports sustainable development of the mining industry.

914-922 19
Abstract

This study introduces an enhanced approach to synthesizing novel derivatives of 4H-1,2,4-oxadiazine-5(6H)-one, a significant heterocyclic class with broad medical and pharmaceutical potential. The synthesis relied on the reaction of N'-hydroxy-4-methylbenzimide and N'-hydroxy-5-methylthiophene-2-carboxymidide with various methyl and ethyl halogen derivatives of carboxylic acids. The findings show that using sodium tert-butylate in dimethyl sulfoxide at room temperature enables efficient cyclization, achieving target product yields up to 76%. Substituents on the aromatic or heterocyclic part of the starting amidoximes were found to have little impact on reactivity, demonstrating the broad applicability of this method. All newly synthesized compounds underwent thorough characterization using modern analytical techniques such as NMR and highresolution mass spectrometry, which fully validated their structure and purity. This method stands out for its mild conditions, operational simplicity, and environmentally friendly nature, as it avoids toxic reagents and metal catalysts. The resulting oxadiazine derivatives are of particular interest as promising pharmacophores with high biological activity, antibacterial, antitumor, and neuroprotective properties. The results of this targeted synthesis will serve as the basis for further research into structural modification and biological activity studies of new heterocyclic systems.

923-934 13
Abstract

Under conditions of increasing environmental requirements and growing resistance of harmful organisms, the development of environmentally safe plant protection products based on industrial waste is an urgent task. Sulfur-containing cakes generated during sulfuric acid production are of particular interest as potential raw materials for obtaining biologically active compounds. A technology for the alkaline extraction of sulfur cake using calcium hydroxide at 90-95 °C and a component ratio of 2.5 : 1 : 10 was developed. The obtained polysulfide composition based on calcium polysulfides was investigated for antibacterial, fungicidal, and insecticidal activity using laboratory and field methods (well diffusion and disk diffusion methods, phytosanitary monitoring of apple orchards). It was established that the obtained composition exhibits dosedependent antibacterial activity against Erwinia amylovora, while no pronounced fungicidal activity against Fusarium sp. and Alternaria sp. was observed. Under field conditions, high insecticidal and acaricidal efficiency (up to 90%) against the main pests of apple crops was recorded. The obtained results confirm the prospects of industrial waste processing for the production of a multifunctional polysulfide composition intended for phytosanitary plant protection and rational utilization of secondary resources.

935-955 15
Abstract

This review systematizes recent studies on the application of cold non-thermal plasma for the remediation of soils contaminated with organic compounds and heavy metals. The mechanisms of reactive oxygen and nitrogen species formation in plasma discharges, their transport through porous soil media, and their involvement in oxidative degradation of organic pollutants, changes in pH and redox potential, and transformation of the chemical forms of inorganic components are considered. Dielectric barrier and corona discharges, as well as direct and remote treatment modes, are compared with regard to discharge parameters, soil moisture and properties, pollutant type and concentration, treatment duration, and energy characteristics. Laboratory studies show that the degradation efficiency of individual organic pollutants can reach 85–99%; however, a decrease in the concentration of the parent compound does not necessarily correspond to the degree of mineralization. Therefore, remediation efficiency should be assessed using residual pollutant concentration, total organic carbon, transformation products, and energy consumption. For heavy metals, plasma treatment is associated primarily with changes in chemical forms, mobility, leachability, and bioavailability rather than with destruction or removal of the element. Depending on the treatment mode, both metal immobilization and changes in plant availability may occur. The effectiveness of cold-plasma treatment is limited by the penetration depth of reactive species and the heterogeneity of the soil matrix. It is concluded that cold plasma is promising as a component of integrated technologies for surface and near-surface soil remediation and that standardization of efficiency and energy-consumption criteria is required.

955-963 18
Abstract

He article presents a comprehensive analytical review of contemporary scientific and technical approaches to the conditioning and immobilization of low- and intermediate-level liquid radioactive waste (LRW) using the bituminization method. The authors describe the performance advantages and microkinetic limitations of utilizing heterogeneous hydrocarbon matrices in detail, and formulate strict regulatory requirements for the physicochemical properties of compounds and the salt composition of fixed process fluids. A detailed comparative analysis of the fractional composition of various industrial bitumen grades, including products from «Pavlodar Oil Chemistry Refinery» LLP, was carried out. The parameters of batch and continuous extrusion processes are systematized. The key internal factors determining the limit of salt loading, dynamic viscosity of mixtures, their radiation resistance, thermal stability, and long-term hydrophobicity under contact with groundwater are analyzed. The necessity of preliminary characterization of LRW phase composition and assessment of its compatibility with bitumen to prevent exothermic reactions is demonstrated. The conditions required for safe intermediate storage and subsequent management of bituminized waste are considered. It is noted that when selecting the optimal solidification technology, it is essential to take into account the fire hazard of the matrix, radiation-induced changes in its properties (radiolysis effects), and the risks of long-term biodegradation. The scientific value of this work lies in forming well-founded recommendations for the limited application of the bituminization method within the framework of the nuclear energy development program in the Republic of Kazakhstan.

964-976 17
Abstract

This article presents a narrative review of the main types of cold non-thermal plasma reactors used in water treatment processes. The physicochemical fundamentals of plasma-based water treatment are considered, including the mechanisms of formation of reactive oxygen and nitrogen species (RONS) and the role of interfacial transfer. Dielectric barrier discharge reactors, corona and pulsed discharge systems, gliding arc reactors, atmospheric plasma jets, liquid-phase and bubble reactors, as well as hybrid plasma-catalytic devices are analyzed. It is shown that the performance of plasma water treatment is determined by the discharge formation zone, the gas-liquid interfacial contact area, flow hydrodynamics, water residence time in the plasma-active zone, and specific energy consumption. The influence of the water matrix on treatment efficiency is also discussed. Based on a comparative analysis presented in three tables, it is shown that there is no universal reactor suitable for all water treatment tasks: each type of device has its own rational field of application. Hybrid plasma-catalytic systems are of the greatest practical interest for increasing the degree of pollutant mineralization and reducing energy consumption. It is concluded that future research should prioritize the development of scalable reactors with controlled gas-liquid mass transfer and minimal formation of byproducts.

976-986 19
Abstract

A series of polyelectrolyte hydrogels based on acrylamide (AAm) and sodium acrylate (SA) crosslinked with N,N'-methylene bis-acrylamide with different monomer ratios has been synthesized. The samples were obtained by free radical copolymerization, after which their equilibrium degree of swelling in water, sensitivity to the ionic strength of the medium, temperature and pH, as well as mechanical characteristics and thermal stability were studied. It was found that an increase in the proportion of sodium acrylate leads to an increase in water absorption due to an increase in the concentration of ionized carboxylate groups and increased electrostatic repulsion between polymer mesh fragments. At the same time, there is a decrease in the Young's modulus, indicating a decrease in the stiffness of the material. An increase in the salt concentration causes an approximately threefold decrease in the degree of swelling due to the shielding of charges by counterions. On the contrary, an increase in temperature to 80°C and an increase in the pH of the medium contribute to the swelling of hydrogels. Thermogravimetric analysis showed the multi-stage nature of thermal degradation and the preservation of high stability of samples up to 200 °C. The results obtained confirm the possibility of directional regulation of the physico-chemical and mechanical properties of hydrogels by changing the AAm/SA ratio and demonstrate the prospects of the developed materials as effective sorbents for the purification and processing of liquid radioactive waste of various compositions in practical conditions of their operation.



Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 2788-7995 (Print)
ISSN 3006-0524 (Online)
X