RESEARCH AND APPLICATION OF MICROARC OXIDATION TECHNOLOGY FOR RESTORATION OF WORKING PISTON SURFACES OF FREIGHT VEHICLES

The scientific article is devoted to the study and application of micro-arc oxidation technology for the restoration of the working surfaces of truck pistons. The study includes an analysis of the physical and chemical processes occurring during microarc oxidation of aluminum alloys from which the pistons are made. The physical impact of MAO promotes the formation of a strong and stable oxide layer, leading to improved surface morphology and closure of microcracks. The results obtained confirm that this technology promotes the formation of hard coatings. The presence of microcracks and surface defects on the original surface of the aluminum alloy caused by operation is noted. After applying the micro-arc oxidation procedure, significant improved surface morphology, reduction of microcracks and removal of defects are visible, indicating the high efficiency of the process. The use of micro-arc oxidized coatings in mechanical engineering promises to increase the durability and efficiency of freight vehicles, as well as reduce repair and maintenance costs. This research represents an important contribution to the field of technological solutions for the remanufacturing of vehicle parts, providing promising prospects for industrial applications.

1. Gakramov R.D. vosstanovlenie detalei mikrodugovym oksidirovaniem / R.D. Gakramov // Molodezh' i nauka. – 2017. – 4-2. – S. 106-106. (In Russian).

2. Tekhnicheskoe obsluzhivanie i remont mashin v sel'skom khozyaistve / pod red. V.I. Chernoivanova. M. – Chelyabinsk: CHGAU, GOSNITI, 2001.0. (In Russian).

3. Increase of elements life by means of plasma electrolytic oxidation / K. Yu, A. Babenkov, A. Merkulov et al // Machines. Technologies. Materials. – 2014. – 8(5). R. 26-28. (In English).

4. Zhuzhlikov A.A. Issledovanie vozmozhnosti primeneniya mikrodugovogo oksidirovaniya dlya vosstanovleniya porshnei dvigatelei avtotraktornoi tekhniki / A.A. Zhuzhlikov, D.I. Laukhin // Nauchnyi zhurnal molodykh uchenykh. – 2016. – 1(6). R. 131-134. (In Russian).

5. Svoistva pokrytii, sformirovannykh na alyuminievykh splavakh v anodno-katodnom rezhime sposobom mikrodugovogo oksidirovaniya / I.N. Kravchenko, A.S. Almosov, A.V. Kolomeichenko // Mashinostroenie: setevoi ehlektronnyi nauchnyi zhurnal. – 2015. – T. 3, № 1. – S. 62-64. (In Russian).

6. Kolomeichenko A.V. Povyshenie resursa detalei mashin s ispol'zovaniem mikrodugovogo oksidirovaniya / A.V. Kolomeichenko, V.N. Logachev, N.V. Titov // Tekhnologiya mashinostroeniya. – 2014. – № 9. – S. 34-38. (In Russian).

7. Kravchenko I.N. Svoistva pokrytii, sformirovannykh na alyuminievykh splavakh v anodnokatodnom rezhime sposobom mikrodugovogo oksidirovaniya / I.N. Kravchenko, A.S. Almosov, A.V. Kolomeichenko // Mashinostroenie: setevoi ehlektronnyi nauchnyi zhurnal. – 2015. – T. 3, № 1. – S. 62-64. (In Russian).

8. A review on the fatigue performance of micro-arc oxidation coated Al alloys with micro-defects and residual stress / W. Dai, C. Zhang, H. // Yue et al Journal of Materials Research and Technology. – 2023. (In English).

9. Zhang K. Preparation of wear and corrosion resistant micro-arc oxidation coating on 7N01 aluminum alloy / K. Zhang, & S. Yu // Surface and Coatings Technology. – 2020. – 388. R. 125453. (In English).

10. Kal'tsii-fosfatnye pokrytiya, poluchennye metodom mikrodugovogo oksidirovaniya / A.ZH. Zhasulan, ZH.B. Sagdoldina, E.M. Mukhametov i dr. // Vestnik Universiteta Shakarima. Seriya tekhnicheskie nauki. – 2023. № 2(10). S. 12-22. (In Russian).

11. Skryabin M.L. Promising methods for strengthening piston aluminum alloys of heat engines / M.L. Skryabin, & A.V. Grebnev // Journal of Physics: Conference Series. 2020. – Vol. 1515, No. 5. – R. 052052. (In English).

12. Ahmad I. Microalgae as a Renewable Energy Source for Biofuel Production // I. Ahmad // Journal of Pure and Applied Microbiology. 2016. – 10(1). R. 95-102. (In English).

13. Aydin F. Effects of using ethanol-biodiesel-diesel fuel in single cylinder diesel engine to engine performance and emissions / F. Aydin, N. Ogut // Renewable Energy. – 2017. – № 103. R. 688-694. (In English).

14. Likhanov V.A. Otsenka integral'noi toksichnosti otrabotavshikh gazov dizelya, rabotayushchego na prirodnom gaze i spirtovykh ehmul'siyakh // V.A. Likhanov, O.P. Lopatin // Ecology and Industry of Russia. – 2019. – № 23(9). S. 60-65. (In Russian).

15. Shatalov V.K. Mikrodugovoe oksidirovanie poverkhnostei izdelii vne vanny / V.K. Shatalov, A.O. Shtokal, A.A. Blatov // Mashinostroenie i komp'yuternye tekhnologii. – 2015. – No. 3. – S. 1-14. (In Russian).

16. Dudareva N.YU. Vliyanie rezhimov mikrodugovogo oksidirovaniya na svoistva formiruemoi poverkhnosti / N.YU. Dudareva // Vestnik Ufimskogo gosudarstvennogo aviatsionnogo tekhnicheskogo universiteta. – 2013. – T. 17, No. 3(56). – S. 217-222. (In Russian).

17. Vinogradov G. Issledovanie mikrostruktury i morfologii pokrytii metodom mikrodugovogo oksidirovaniya alyuminievykh splavov / G. Vinogradov // Metallovedenie i termicheskaya obrabotka metallov. – 2015. – № 4. – S. 43-47. (In Russian).

18. Sokolov A. Vliyanie rezhimov mikrodugovogo oksidirovaniya na morfologiyu pokrytii iz alyuminievykh splavov / A. Sokolov, P. Ivanov // Trudy instituta metallurgii i materialovedeniya. – 2018. – № 2(15), S. 87-94. (In Russian).

19. Grigor'ev V. Morfologicheskie osobennosti pokrytii, poluchennykh metodom mikrodugovogo oksidirovaniya / V. Grigor'ev, N. Petrov // Vestnik tekhnologicheskogo universiteta. – 2016. – № 8. – S. 56-61. (In Russian).

20. Zhukov S. Tverdost' i mikrostruktura oksidnykh pokrytii na alyuminievykh splavakh posle mikrodugovogo oksidirovaniya / S. Zhukov, A. Kozlov, A. 88 Metallovedenie i termicheskaya obrabotka metallov. – 2019. – № 1. – S. 32-37. (In Russian).

21. Novikov P. Vliyanie parametrov mikrodugovogo oksidirovaniya na tverdost' pokrytii / P. Novikov, A. Smirnov, A. Tekhnicheskaya fizika. – 2017. № 5. S. 78-82. (In Russian).

22. Kuznetsov D. Issledovanie tverdosti i struktury pokrytii, poluchennykh metodom mikrodugovogo oksidirovaniya / D. Kuznetsov, I. Romanov // Materialovedenie i metallurgiya. – 2016. – № 3. S. 64-70. (In Russian).