FEATURES OF BORON CARBIDE FORMATION DURING MECHANOCHEMICAL AND SELF-PROPAGATING HIGH-TEMPERATURE SYNTHESIS
https://doi.org/10.53360/2788-7995-2026-3(23)-85
Abstract
The formation behavior of boron carbide in the B₂O₃–Al–C and B₂O₃–Mg–C systems during mechanochemical and self-propagating high-temperature synthesis (SHS) was investigated. Mechanochemical treatment of the B₂O₃–Al–C system was carried out in a planetary ball mill at rotational speeds of 350-500 rpm, treatment times of 30-90 min, and ball-to-powder mass ratios (BPR) of 10-30. Mechanical activation was found to promote particle size reduction and structural modification of the powder mixture, as well as solid-state transformations accompanied by the formation of boroaluminate, oxide, and carbide phases. X-ray diffraction analysis of the product obtained at 450 rpm, a treatment time of 30 min, and BPR = 20 revealed the presence of the B₄C phase along with Al₁₂B₆O₃₆, Al₂O₃, residual Al, and an Al–Ccontaining phase.
During SHS, the nature of the metallic reducing agent was found to have a significant effect on the combustion parameters and phase formation. For the B₂O₃–Al–C system, the combustion-front temperature ranged from 2640 to 2750 °C, with a propagation velocity of 6.0-8.9 mm/s, whereas in the B₂O₃–Mg–C system, the temperature reached approximately 3000 °C and the front velocity reached 10.9 mm/s. The maximum B₄C content in the investigated products was 4 wt.% for the aluminothermic system and 5 wt.% for the magnesiothermic system. In addition to B₄C, oxide and borate phases were formed in the SHS products, with their composition being determined by the nature of the reducing agent. The possibility of subsequently isolating boron carbide from the multicomponent products by selective chemical treatment was demonstrated. The obtained results indicate that combining mechanical activation with metallothermic SHS is a promising approach for the controlled formation of B₄C-containing materials.
About the Authors
D. MuktalyKazakhstan
Dinara Muktaly – PhD, Associate Professor. Leading Researcher
Republic of Kazakhstan, Almaty, Bogenbai Batyr St., 172
050040, Republic of Kazakhstan, Almaty, Al-Farabi, 71
B. X. Musabayeva
Kazakhstan
Binur Mussabayeva – PhD, Professor
Republic of Kazakhstan, Astana, Kabanbai Batyr, 8
A. Batkal
Kazakhstan
Aisulu Batkal – Research Associate
Republic of Kazakhstan, Almaty, Bogenbai Batyr St., 172
K. Kamunur
Kazakhstan
Kaster Kamunur – PhD, Associate Professor. Leading Researcher
Republic of Kazakhstan, Almaty, Bogenbai Batyr St., 172
A. Abylaikhan
Kazakhstan
Akerke Abylaykhan – PhD, Leading Researcher
Republic of Kazakhstan, Almaty, Bogenbai Batyr St., 172
050040, Republic of Kazakhstan, Almaty, Al-Farabi, 71
References
1. Effects of boron oxide composition, structure, and morphology on B₄C formation via the SHS process in the B₂O₃–Mg–C ternary system / S. Aghili et al // Ceramics International. – 2020. – Vol. 46. – P. 7223-7234. https://doi.org/10.1016/j.ceramint.2019.11.217.
2. Novel Pathway for the Combustion Synthesis and Consolidation of Boron Carbide / M.K. Zakaryan et al // Materials. – 2022. – Vol. 15. – Р. 5042. https://doi.org/10.3390/ma15145042.
3. Influence of Sintering Process Conditions on Microstructural and Mechanical Properties of Boron Carbide Ceramics Synthesized by Spark Plasma Sintering / Y. Liu et al // Materials. – 2021. – № 14. – Р. 1100. https://doi.org/10.3390/ma14051100.
4. Avcioglu S. Effect of elemental nano boron on the transformation and morphology of boron carbide (B4C) powders synthesized from polymeric precursors / S. Avcioglu, F. Kaya, C. Kaya // Ceram. Int. – 2020. – № 46. – Р. 17938-17950. https://doi.org/10.1016/j.ceramint.2020.04.104.
5. Construction of a Novel Barium Free Green Light Emitting Illuminant Based on Boron Carbide / Z. Huang et al // Propellants, Explosives, Pyrotechnics. – 2021. – Т. 46, № 9. – Р. 1480-1488. https://doi.org/10.1002/prep.202100038.
6. Walters I.T. Environmentally friendly boron-based pyrotechnic delays: an additive manufacturing approach / I.T. Walters, L.J. Groven // ACS Sustainable Chemistry & Engineering. – 2019. – Т. 7, № 4. – Р. 4360-4367. https://doi.org/10.1021/acssuschemeng.8b06204.
7. Horiuchi K. Reactivity of boron carbide and metal oxide mixtures / K. Horiuchi, A. Huynh, J. Kalman // Proceedings of the Combustion Institute. – 2023. – Т. 39, № 3. – Р. 3313-3321. https://doi.org/10.1016/j.proci.2022.07.107.
8. Yaghoubi M. Effect of the magnesium content on the mechanochemical behavior in ternary system Mg–B2O3–C / M. Yaghoubi, O. Torabi // International Journal of Refractory Metals and Hard Materials. – 2014. – P. 132-140. https://doi.org/10.1016/j.ijrmhm.2013.11.014.
9. Combustion and Radiation Properties of B4C/PTFE Based Pyrolants Under the Influence of Various Oxidants / B. Zhou et al //Combustion Science and Technology. – 2025. – P. 1-23. https://doi.org/10.1080/00102202.2025.2536218.
10. Boron Carbide Composites Produced by Self-Propagating High-Temperature Synthesis / R.G. Abdulkarimova et al // Revista Ingeniería UC. – 2021. – Vol. 28, № 1. https://doi.org/10.54139/revinguc.v28i1.5.
11. Influences of mechanical activation and tartaric acid addition on the efficiency of B₄C synthesis / S.F. Feiz et al // Synthesis and Sintering. – 2023. – Vol. 3. – P. 54-59. https://doi.org/10.53063/synsint.2023.31140.
12. Influence of Kinetic Factors on Preparation of Boron Carbide by Magnesiothermic SelfPropagation Synthesis / H. Shi et al // J. Cent. South Univ. – 2023. – № 30. – Р. 735-748. https://journal.hep.com.cn/jocsu/EN/10.1007/s11771-023-5264-1.
13. Wang Self-propagating high-temperature synthesis of B4C: integrating combustion wave features and crystallization kinetics / Wang, D. Zhihe, Zh. Tingan // Ceramics International. – 2025. – Issue 30. – P. 65856-65870. https://doi.org/10.1016/j.ceramint.2025.11.265.
14. The synthesis and characterization of B6O, B4C and ZrB2 at a pressure of 6 GPa / D. Chu et al // International Journal of Refractory Metals and Hard Materials. – 2025. – Р. 107070. https://doi.org/10.1016/j.ijrmhm.2025.107070.
15. Wang C. Effect of carbon sources on morphology of B4C powders synthesized by magnesiothermic SHS / C. Wang, Zh. Dou, T. Zhang // Powder Technology. – 2026. – P. 122524. https://doi.org/10.1016/j.powtec.2026.122524.
Review
For citations:
Muktaly D., Musabayeva B.X., Batkal A., Kamunur K., Abylaikhan A. FEATURES OF BORON CARBIDE FORMATION DURING MECHANOCHEMICAL AND SELF-PROPAGATING HIGH-TEMPERATURE SYNTHESIS. Bulletin of Shakarim University. Technical Sciences. 2026;(3(23)):839-848. (In Kazakh) https://doi.org/10.53360/2788-7995-2026-3(23)-85
JATS XML















