<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE article PUBLIC "-//NLM//DTD JATS (Z39.96) Journal Publishing DTD v1.3 20210610//EN" "JATS-journalpublishing1-3.dtd">
<article article-type="research-article" dtd-version="1.3" xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xml:lang="ru"><front><journal-meta><journal-id journal-id-type="publisher-id">kaz44</journal-id><journal-title-group><journal-title xml:lang="ru">Вестник Университета Шакарима. Серия технические науки</journal-title><trans-title-group xml:lang="en"><trans-title>Bulletin of Shakarim University. Technical Sciences</trans-title></trans-title-group></journal-title-group><issn pub-type="ppub">2788-7995</issn><issn pub-type="epub">3006-0524</issn><publisher><publisher-name>«Шәкәрім университеті» КеАҚ</publisher-name></publisher></journal-meta><article-meta><article-id pub-id-type="doi">10.53360/2788-7995-2026-3(23)-85</article-id><article-id custom-type="elpub" pub-id-type="custom">kaz44-2968</article-id><article-categories><subj-group subj-group-type="heading"><subject>Research Article</subject></subj-group><subj-group subj-group-type="section-heading" xml:lang="ru"><subject>ХИМИЧЕСКАЯ ТЕХНОЛОГИЯ (ОРИГИНАЛЬНАЯ СТАТЬЯ)</subject></subj-group><subj-group subj-group-type="section-heading" xml:lang="en"><subject>CHEMICAL TECHNOLOGY (ORIGINAL ARTICLE)</subject></subj-group></article-categories><title-group><article-title>ОСОБЕННОСТИ ФОРМИРОВАНИЯ КАРБИДА БОРА ПРИ МЕХАНОХИМИЧЕСКОМ И САМОРАСПРОСТРАНЯЮЩЕМСЯ ВЫСОКОТЕМПЕРАТУРНОМ СИНТЕЗЕ</article-title><trans-title-group xml:lang="en"><trans-title>FEATURES OF BORON CARBIDE FORMATION DURING MECHANOCHEMICAL AND SELF-PROPAGATING HIGH-TEMPERATURE SYNTHESIS</trans-title></trans-title-group></title-group><contrib-group><contrib contrib-type="author" corresp="yes"><contrib-id contrib-id-type="orcid">https://orcid.org/0000-0002-1139-5488</contrib-id><name-alternatives><name name-style="eastern" xml:lang="ru"><surname>Мұқталы</surname><given-names>Д.</given-names></name><name name-style="western" xml:lang="en"><surname>Muktaly</surname><given-names>D.</given-names></name></name-alternatives><bio xml:lang="ru"><p>Динара Мұқталы – PhD, ассоциированный профессор. Ведущий научный сотрудник </p><p>Республика Казахстан, г. Алматы, ул. Богенбай батыра, 172</p><p>050040, Республика Казахстан, Алматы, пр. Аль-Фараби, 71</p><p> </p></bio><bio xml:lang="en"><p>Dinara Muktaly – PhD, Associate Professor. Leading Researcher</p><p>Republic of Kazakhstan, Almaty, Bogenbai Batyr St., 172</p><p>050040, Republic of Kazakhstan, Almaty, Al-Farabi, 71</p></bio><email xlink:type="simple">dinara.muktaly@mail.ru</email><xref ref-type="aff" rid="aff-1"/></contrib><contrib contrib-type="author" corresp="yes"><contrib-id contrib-id-type="orcid">https://orcid.org/0000-0003-2209-1209</contrib-id><name-alternatives><name name-style="eastern" xml:lang="ru"><surname>Мусабаева</surname><given-names>Б. Х.</given-names></name><name name-style="western" xml:lang="en"><surname>Musabayeva</surname><given-names>B. X.</given-names></name></name-alternatives><bio xml:lang="ru"><p>Бинур Хабасовна Мусабаева – к.х.н., профессор</p><p>Республика Казахстан, г. Астана, проспект Кабанбай батыра, 8</p></bio><bio xml:lang="en"><p>Binur Mussabayeva – PhD, Professor</p><p>Republic of Kazakhstan, Astana, Kabanbai Batyr, 8</p></bio><email xlink:type="simple">mussabayevabinur@gmail.com</email><xref ref-type="aff" rid="aff-2"/></contrib><contrib contrib-type="author" corresp="yes"><contrib-id contrib-id-type="orcid">https://orcid.org/0000-0002-2271-6953</contrib-id><name-alternatives><name name-style="eastern" xml:lang="ru"><surname>Баткал</surname><given-names>А.</given-names></name><name name-style="western" xml:lang="en"><surname>Batkal</surname><given-names>A.</given-names></name></name-alternatives><bio xml:lang="ru"><p>Айсулу Баткал – научный сотрудник </p><p>Республика Казахстан, г. Алматы, ул. Богенбай батыра, 172</p></bio><bio xml:lang="en"><p>Aisulu Batkal – Research Associate</p><p>Republic of Kazakhstan, Almaty, Bogenbai Batyr St., 172</p></bio><email xlink:type="simple">abatkalova@mail.ru</email><xref ref-type="aff" rid="aff-3"/></contrib><contrib contrib-type="author" corresp="yes"><contrib-id contrib-id-type="orcid">https://orcid.org/0009-0006-0013-1926</contrib-id><name-alternatives><name name-style="eastern" xml:lang="ru"><surname>Камунур</surname><given-names>К.</given-names></name><name name-style="western" xml:lang="en"><surname>Kamunur</surname><given-names>K.</given-names></name></name-alternatives><bio xml:lang="ru"><p>Кастер Камунур – PhD, ассоциированный профессор. Ведущий научный сотрудник </p><p>Республика Казахстан, г. Алматы, ул. Богенбай батыра, 172</p></bio><bio xml:lang="en"><p>Kaster Kamunur – PhD, Associate Professor. Leading Researcher</p><p>Republic of Kazakhstan, Almaty, Bogenbai Batyr St., 172</p></bio><email xlink:type="simple">kamunur.k@mail.ru</email><xref ref-type="aff" rid="aff-3"/></contrib><contrib contrib-type="author" corresp="yes"><contrib-id contrib-id-type="orcid">https://orcid.org/0000-0003-1489-9603</contrib-id><name-alternatives><name name-style="eastern" xml:lang="ru"><surname>Абылайхан</surname><given-names>А.</given-names></name><name name-style="western" xml:lang="en"><surname>Abylaikhan</surname><given-names>A.</given-names></name></name-alternatives><bio xml:lang="ru"><p>Акерке Абылайхан – к.х.н., ведущий научный сотрудник</p><p>050040, Республика Казахстан, Алматы, пр. Аль-Фараби, 71</p><p> </p></bio><bio xml:lang="en"><p>Akerke Abylaykhan – PhD, Leading Researcher</p><p>Republic of Kazakhstan, Almaty, Bogenbai Batyr St., 172</p><p>050040, Republic of Kazakhstan, Almaty, Al-Farabi, 71</p></bio><email xlink:type="simple">akerkeabylaikhan2@gmail.com</email><xref ref-type="aff" rid="aff-4"/></contrib></contrib-group><aff-alternatives id="aff-1"><aff xml:lang="ru"><institution>Институт проблем горения;&#13;
Научно-исследовательский институт новых химических технологий и материалов КазНУ имени аль-Фараби</institution><country>Казахстан</country></aff><aff xml:lang="en"><institution>Institute of Combustion Problems;&#13;
Scientific Research Institute for New Chemical Technologies and Materials at Al-Farabi Kazakh National University</institution><country>Kazakhstan</country></aff></aff-alternatives><aff-alternatives id="aff-2"><aff xml:lang="ru"><institution>Международный университет Астана</institution><country>Казахстан</country></aff><aff xml:lang="en"><institution>Astana International University</institution><country>Kazakhstan</country></aff></aff-alternatives><aff-alternatives id="aff-3"><aff xml:lang="ru"><institution>Институт проблем горения</institution><country>Казахстан</country></aff><aff xml:lang="en"><institution>Institute of Combustion Problems</institution><country>Kazakhstan</country></aff></aff-alternatives><aff-alternatives id="aff-4"><aff xml:lang="ru"><institution>Научно-исследовательский институт новых химических технологий и материалов КазНУ имени аль-Фараби</institution><country>Казахстан</country></aff><aff xml:lang="en"><institution>Institute of Combustion Problems;&#13;
Scientific Research Institute for New Chemical Technologies and Materials at Al-Farabi Kazakh National University</institution><country>Kazakhstan</country></aff></aff-alternatives><pub-date pub-type="collection"><year>2026</year></pub-date><pub-date pub-type="epub"><day>20</day><month>11</month><year>2026</year></pub-date><volume>0</volume><issue>3(23)</issue><fpage>839</fpage><lpage>848</lpage><permissions><copyright-statement>Copyright &amp;#x00A9; Мұқталы Д., Мусабаева Б.Х., Баткал А., Камунур К., Абылайхан А., 2026</copyright-statement><copyright-year>2026</copyright-year><copyright-holder xml:lang="ru">Мұқталы Д., Мусабаева Б.Х., Баткал А., Камунур К., Абылайхан А.</copyright-holder><copyright-holder xml:lang="en">Muktaly D., Musabayeva B.X., Batkal A., Kamunur K., Abylaikhan A.</copyright-holder><license xml:lang="ru" license-type="creative-commons-attribution" xlink:href="https://creativecommons.org/licenses/by/4.0/" xlink:type="simple"><license-p>Данная работа распространяется под лицензией Creative Commons Attribution 4.0.</license-p></license><license xml:lang="en" license-type="creative-commons-attribution" xlink:href="https://creativecommons.org/licenses/by/4.0/" xlink:type="simple"><license-p>This work is licensed under a Creative Commons Attribution 4.0 License.</license-p></license></permissions><self-uri xlink:href="https://tech.vestnik.shakarim.kz/jour/article/view/2968">https://tech.vestnik.shakarim.kz/jour/article/view/2968</self-uri><abstract><p>Исследованы закономерности формирования карбида бора в системах B₂O₃–Al–C и B₂O₃–Mg–C при механохимическом и самораспространяющемся высокотемпературном синтезе (CВС). Механохимическую обработку системы B₂O₃–Al–C проводили в планетарной шаровой мельнице при скорости вращения 350–500 об/мин, продолжительности 30–90 мин и отношении массы шаров к массе порошковой шихты (BPR) 10–30. Установлено, что механическая активация сопровождается измельчением и структурированием порошковой смеси, а также развитием твердофазных превращений с образованием бороалюминатных, оксидных и карбидных фаз. В продукте, полученном при 450 об/мин, продолжительности обработки 30 мин и BPR = 20, методом рентгенофазового анализа обнаружена фаза B₄C, присутствующая наряду с Al₁₂B₆O₃₆, Al₂O₃, остаточным Al и алюминий-углеродсодержащей фазой.При СВС установлено существенное влияние природы металла-восстановителя на параметры горения и фазообразование. Для системы B₂O₃–Al–C температура фронта составляла 2640-2750°C при скорости распространения 6,0–8,9 мм/с, тогда как для B₂O₃–Mg–C температура достигала около 3000°C, а скорость фронта – 10,9 мм/с. Максимальное содержание B₄C в исследованных продуктах составляло 4 мас. % для алюмотермической и 5 мас. % для магнийтермической системы. В продуктах СВС наряду с B₄C формируются оксидные и боратные фазы, состав которых определяется природой восстановителя. Показана возможность последующего выделения карбида бора из многокомпонентных продуктов путем селективной химической обработки. Полученные результаты показывают перспективность сочетания механической активации и металлотермического СВС для направленного формирования B₄Cсодержащих материалов.</p></abstract><trans-abstract xml:lang="en"><p>The formation behavior of boron carbide in the B₂O₃–Al–C and B₂O₃–Mg–C systems during mechanochemical and self-propagating high-temperature synthesis (SHS) was investigated. Mechanochemical treatment of the B₂O₃–Al–C system was carried out in a planetary ball mill at rotational speeds of 350-500 rpm, treatment times of 30-90 min, and ball-to-powder mass ratios (BPR) of 10-30. Mechanical activation was found to promote particle size reduction and structural modification of the powder mixture, as well as solid-state transformations accompanied by the formation of boroaluminate, oxide, and carbide phases. X-ray diffraction analysis of the product obtained at 450 rpm, a treatment time of 30 min, and BPR = 20 revealed the presence of the B₄C phase along with Al₁₂B₆O₃₆, Al₂O₃, residual Al, and an Al–Ccontaining phase.During SHS, the nature of the metallic reducing agent was found to have a significant effect on the combustion parameters and phase formation. For the B₂O₃–Al–C system, the combustion-front temperature ranged from 2640 to 2750 °C, with a propagation velocity of 6.0-8.9 mm/s, whereas in the B₂O₃–Mg–C system, the temperature reached approximately 3000 °C and the front velocity reached 10.9 mm/s. The maximum B₄C content in the investigated products was 4 wt.% for the aluminothermic system and 5 wt.% for the magnesiothermic system. In addition to B₄C, oxide and borate phases were formed in the SHS products, with their composition being determined by the nature of the reducing agent. The possibility of subsequently isolating boron carbide from the multicomponent products by selective chemical treatment was demonstrated. The obtained results indicate that combining mechanical activation with metallothermic SHS is a promising approach for the controlled formation of B₄C-containing materials.</p></trans-abstract><kwd-group xml:lang="ru"><kwd>карбид бора</kwd><kwd>механохимический синтез</kwd><kwd>механическая активация</kwd><kwd>самораспространяющийся  высокотемпературный синтез</kwd><kwd>алюмотермия</kwd><kwd>магниетермия</kwd><kwd>фазообразование</kwd></kwd-group><kwd-group xml:lang="en"><kwd>boron carbide</kwd><kwd>mechanochemical synthesis</kwd><kwd>mechanical activation</kwd><kwd>self-propagating hightemperature synthesis</kwd><kwd>aluminothermy</kwd><kwd>magnesiothermy</kwd><kwd>phase formation</kwd></kwd-group></article-meta></front><back><ref-list><title>References</title><ref id="cit1"><label>1</label><citation-alternatives><mixed-citation xml:lang="ru">Effects of boron oxide composition, structure, and morphology on B₄C formation via the SHS process in the B₂O₃–Mg–C ternary system / S. Aghili et al // Ceramics International. – 2020. – Vol. 46. – P. 7223-7234. https://doi.org/10.1016/j.ceramint.2019.11.217.</mixed-citation><mixed-citation xml:lang="en">Effects of boron oxide composition, structure, and morphology on B₄C formation via the SHS process in the B₂O₃–Mg–C ternary system / S. Aghili et al // Ceramics International. – 2020. – Vol. 46. – P. 7223-7234. https://doi.org/10.1016/j.ceramint.2019.11.217.</mixed-citation></citation-alternatives></ref><ref id="cit2"><label>2</label><citation-alternatives><mixed-citation xml:lang="ru">Novel Pathway for the Combustion Synthesis and Consolidation of Boron Carbide / M.K. Zakaryan et al // Materials. – 2022. – Vol. 15. – Р. 5042. https://doi.org/10.3390/ma15145042.</mixed-citation><mixed-citation xml:lang="en">Novel Pathway for the Combustion Synthesis and Consolidation of Boron Carbide / M.K. Zakaryan et al // Materials. – 2022. – Vol. 15. – Р. 5042. https://doi.org/10.3390/ma15145042.</mixed-citation></citation-alternatives></ref><ref id="cit3"><label>3</label><citation-alternatives><mixed-citation xml:lang="ru">Influence of Sintering Process Conditions on Microstructural and Mechanical Properties of Boron Carbide Ceramics Synthesized by Spark Plasma Sintering / Y. Liu et al // Materials. – 2021. – № 14. – Р. 1100. https://doi.org/10.3390/ma14051100.</mixed-citation><mixed-citation xml:lang="en">Influence of Sintering Process Conditions on Microstructural and Mechanical Properties of Boron Carbide Ceramics Synthesized by Spark Plasma Sintering / Y. Liu et al // Materials. – 2021. – № 14. – Р. 1100. https://doi.org/10.3390/ma14051100.</mixed-citation></citation-alternatives></ref><ref id="cit4"><label>4</label><citation-alternatives><mixed-citation xml:lang="ru">Avcioglu S. Effect of elemental nano boron on the transformation and morphology of boron carbide (B4C) powders synthesized from polymeric precursors / S. Avcioglu, F. Kaya, C. Kaya // Ceram. Int. – 2020. – № 46. – Р. 17938-17950. https://doi.org/10.1016/j.ceramint.2020.04.104.</mixed-citation><mixed-citation xml:lang="en">Avcioglu S. Effect of elemental nano boron on the transformation and morphology of boron carbide (B4C) powders synthesized from polymeric precursors / S. Avcioglu, F. Kaya, C. Kaya // Ceram. Int. – 2020. – № 46. – Р. 17938-17950. https://doi.org/10.1016/j.ceramint.2020.04.104.</mixed-citation></citation-alternatives></ref><ref id="cit5"><label>5</label><citation-alternatives><mixed-citation xml:lang="ru">Construction of a Novel Barium Free Green Light Emitting Illuminant Based on Boron Carbide / Z. Huang et al // Propellants, Explosives, Pyrotechnics. – 2021. – Т. 46, № 9. – Р. 1480-1488. https://doi.org/10.1002/prep.202100038.</mixed-citation><mixed-citation xml:lang="en">Construction of a Novel Barium Free Green Light Emitting Illuminant Based on Boron Carbide / Z. Huang et al // Propellants, Explosives, Pyrotechnics. – 2021. – Т. 46, № 9. – Р. 1480-1488. https://doi.org/10.1002/prep.202100038.</mixed-citation></citation-alternatives></ref><ref id="cit6"><label>6</label><citation-alternatives><mixed-citation xml:lang="ru">Walters I.T. Environmentally friendly boron-based pyrotechnic delays: an additive manufacturing approach / I.T. Walters, L.J. Groven // ACS Sustainable Chemistry &amp; Engineering. – 2019. – Т. 7, № 4. – Р. 4360-4367. https://doi.org/10.1021/acssuschemeng.8b06204.</mixed-citation><mixed-citation xml:lang="en">Walters I.T. Environmentally friendly boron-based pyrotechnic delays: an additive manufacturing approach / I.T. Walters, L.J. Groven // ACS Sustainable Chemistry &amp; Engineering. – 2019. – Т. 7, № 4. – Р. 4360-4367. https://doi.org/10.1021/acssuschemeng.8b06204.</mixed-citation></citation-alternatives></ref><ref id="cit7"><label>7</label><citation-alternatives><mixed-citation xml:lang="ru">Horiuchi K. Reactivity of boron carbide and metal oxide mixtures / K. Horiuchi, A. Huynh, J. Kalman // Proceedings of the Combustion Institute. – 2023. – Т. 39, № 3. – Р. 3313-3321. https://doi.org/10.1016/j.proci.2022.07.107.</mixed-citation><mixed-citation xml:lang="en">Horiuchi K. Reactivity of boron carbide and metal oxide mixtures / K. Horiuchi, A. Huynh, J. Kalman // Proceedings of the Combustion Institute. – 2023. – Т. 39, № 3. – Р. 3313-3321. https://doi.org/10.1016/j.proci.2022.07.107.</mixed-citation></citation-alternatives></ref><ref id="cit8"><label>8</label><citation-alternatives><mixed-citation xml:lang="ru">Yaghoubi M. Effect of the magnesium content on the mechanochemical behavior in ternary system Mg–B2O3–C / M. Yaghoubi, O. Torabi // International Journal of Refractory Metals and Hard Materials. – 2014. – P. 132-140. https://doi.org/10.1016/j.ijrmhm.2013.11.014.</mixed-citation><mixed-citation xml:lang="en">Yaghoubi M. Effect of the magnesium content on the mechanochemical behavior in ternary system Mg–B2O3–C / M. Yaghoubi, O. Torabi // International Journal of Refractory Metals and Hard Materials. – 2014. – P. 132-140. https://doi.org/10.1016/j.ijrmhm.2013.11.014.</mixed-citation></citation-alternatives></ref><ref id="cit9"><label>9</label><citation-alternatives><mixed-citation xml:lang="ru">Combustion and Radiation Properties of B4C/PTFE Based Pyrolants Under the Influence of Various Oxidants / B. Zhou et al //Combustion Science and Technology. – 2025. – P. 1-23. https://doi.org/10.1080/00102202.2025.2536218.</mixed-citation><mixed-citation xml:lang="en">Combustion and Radiation Properties of B4C/PTFE Based Pyrolants Under the Influence of Various Oxidants / B. Zhou et al //Combustion Science and Technology. – 2025. – P. 1-23. https://doi.org/10.1080/00102202.2025.2536218.</mixed-citation></citation-alternatives></ref><ref id="cit10"><label>10</label><citation-alternatives><mixed-citation xml:lang="ru">Boron Carbide Composites Produced by Self-Propagating High-Temperature Synthesis / R.G. Abdulkarimova et al // Revista Ingeniería UC. – 2021. – Vol. 28, № 1. https://doi.org/10.54139/revinguc.v28i1.5.</mixed-citation><mixed-citation xml:lang="en">Boron Carbide Composites Produced by Self-Propagating High-Temperature Synthesis / R.G. Abdulkarimova et al // Revista Ingeniería UC. – 2021. – Vol. 28, № 1. https://doi.org/10.54139/revinguc.v28i1.5.</mixed-citation></citation-alternatives></ref><ref id="cit11"><label>11</label><citation-alternatives><mixed-citation xml:lang="ru">Influences of mechanical activation and tartaric acid addition on the efficiency of B₄C synthesis / S.F. Feiz et al // Synthesis and Sintering. – 2023. – Vol. 3. – P. 54-59. https://doi.org/10.53063/synsint.2023.31140.</mixed-citation><mixed-citation xml:lang="en">Influences of mechanical activation and tartaric acid addition on the efficiency of B₄C synthesis / S.F. Feiz et al // Synthesis and Sintering. – 2023. – Vol. 3. – P. 54-59. https://doi.org/10.53063/synsint.2023.31140.</mixed-citation></citation-alternatives></ref><ref id="cit12"><label>12</label><citation-alternatives><mixed-citation xml:lang="ru">Influence of Kinetic Factors on Preparation of Boron Carbide by Magnesiothermic SelfPropagation Synthesis / H. Shi et al // J. Cent. South Univ. – 2023. – № 30. – Р. 735-748. https://journal.hep.com.cn/jocsu/EN/10.1007/s11771-023-5264-1.</mixed-citation><mixed-citation xml:lang="en">Influence of Kinetic Factors on Preparation of Boron Carbide by Magnesiothermic SelfPropagation Synthesis / H. Shi et al // J. Cent. South Univ. – 2023. – № 30. – Р. 735-748. https://journal.hep.com.cn/jocsu/EN/10.1007/s11771-023-5264-1.</mixed-citation></citation-alternatives></ref><ref id="cit13"><label>13</label><citation-alternatives><mixed-citation xml:lang="ru">Wang Self-propagating high-temperature synthesis of B4C: integrating combustion wave features and crystallization kinetics / Wang, D. Zhihe, Zh. Tingan // Ceramics International. – 2025. – Issue 30. – P. 65856-65870. https://doi.org/10.1016/j.ceramint.2025.11.265.</mixed-citation><mixed-citation xml:lang="en">Wang Self-propagating high-temperature synthesis of B4C: integrating combustion wave features and crystallization kinetics / Wang, D. Zhihe, Zh. Tingan // Ceramics International. – 2025. – Issue 30. – P. 65856-65870. https://doi.org/10.1016/j.ceramint.2025.11.265.</mixed-citation></citation-alternatives></ref><ref id="cit14"><label>14</label><citation-alternatives><mixed-citation xml:lang="ru">The synthesis and characterization of B6O, B4C and ZrB2 at a pressure of 6 GPa / D. Chu et al // International Journal of Refractory Metals and Hard Materials. – 2025. – Р. 107070. https://doi.org/10.1016/j.ijrmhm.2025.107070.</mixed-citation><mixed-citation xml:lang="en">The synthesis and characterization of B6O, B4C and ZrB2 at a pressure of 6 GPa / D. Chu et al // International Journal of Refractory Metals and Hard Materials. – 2025. – Р. 107070. https://doi.org/10.1016/j.ijrmhm.2025.107070.</mixed-citation></citation-alternatives></ref><ref id="cit15"><label>15</label><citation-alternatives><mixed-citation xml:lang="ru">Wang C. Effect of carbon sources on morphology of B4C powders synthesized by magnesiothermic SHS / C. Wang, Zh. Dou, T. Zhang // Powder Technology. – 2026. – P. 122524. https://doi.org/10.1016/j.powtec.2026.122524.</mixed-citation><mixed-citation xml:lang="en">Wang C. Effect of carbon sources on morphology of B4C powders synthesized by magnesiothermic SHS / C. Wang, Zh. Dou, T. Zhang // Powder Technology. – 2026. – P. 122524. https://doi.org/10.1016/j.powtec.2026.122524.</mixed-citation></citation-alternatives></ref></ref-list><fn-group><fn fn-type="conflict"><p>The authors declare that there are no conflicts of interest present.</p></fn></fn-group></back></article>
