APPLICATION OF AN ELECTROSLAG REMELTING FACILITY FOR PROCESSING SOLID RADIOACTIVE WASTE FROM THE BN-350 REACTOR
https://doi.org/10.53360/2788-7995-2026-3(23)-76
Abstract
The processing of solid metallic radioactive waste (SRW) generated during the decommissioning of nuclear facilities is an important task that can reduce the volume of waste requiring disposal. This paper presents the results of a study on the feasibility of applying electroslag remelting (ESR) to process solid metallic radioactive waste from the BN-350 reactor. The experiment was conducted using an ESR facility previously tested for the decontamination of steel flame tubes from the IVG.1M research reactor. A fragment of a 12Cr18Ni10Ti steel tube with dimensions of Ø50×5 mm was used as a surrogate for one of the BN-350 SRW samples. Prior to the experiment, the facility was prepared, the consumable electrode was positioned, and a molten slag bath was formed. During remelting, the electrical parameters of the facility were recorded to analyze the characteristics of the process. As a result, 2.3 kg of metal was remelted, producing a cylindrical ingot approximately 60 mm in diameter. Analysis of the recorded current and voltage values showed that process instability at the initial stage was associated with short circuits between the electrode and the copper mold of the crystallizer. The short circuits were caused by the small annular gap and an insufficient amount of flux within this gap. The results demonstrated that the existing facility configuration enables the remelting of tubular metallic components; however, the geometric dimensions of the processed samples are limited by the crystallizer parameters and the required annular gap. Processing SRW samples of different sizes and shapes therefore requires the development of crystallizers with appropriate geometric and design parameters.
About the Authors
Y. A. KabdylkakovKazakhstan
Yerzhan A. Kabdylkakov – Researcher at the Laboratory for Investigation of Thermophysical and Neutron-Physical Characteristics of Irradiation Devices; Second-year PhD student in Technical Physics at the Research School of Physical and Chemical Sciences, Shakarim University
180010, Republic of Kazakhstan, Abay region, Kurchatov, Beybit atom street 10
N. Y. Mukhamedov
Kazakhstan
Nurzhan E. Mukhamedov – Head of the Department for Development and Testing of Reactor Devices; PhD, Associate Professor
180010, Republic of Kazakhstan, Abay region, Kurchatov, Beybit atom street 10
A. S. Suraev
Kazakhstan
Artur S. Suraev – Leading Researcher at the Laboratory for Investigation of Thermophysical and Neutron-Physical Characteristics of Irradiation Devices; PhD, Associate Professor
180010, Republic of Kazakhstan, Abay region, Kurchatov, Beybit atom street 10
S. A. Dolzhikov
Kazakhstan
Sergey Aleksandrovich Dolzhikov – Head of Group, Reactor Fuel Testing Laboratory, Institute of Atomic Energy; Second-year doctoral student in Technical Physics at the Research School of Physical and Chemical Sciences, Shakarim University
180010, Republic of Kazakhstan, Abay region, Kurchatov, Beybit atom street 10
A. V. Pakhnits
Kazakhstan
Aleksandr Vladimirovich Pakhnits – Deputy Head of the Department of Development and Testing of Reactor Devices, Institute of Atomic Energy
180010, Republic of Kazakhstan, Abay region, Kurchatov, Beybit atom street 10
References
1. Chto takoe radioaktivnye otkhody? / Yu. Amano i dr. // IAEA Bulletin. – 2014. – T. 55, № 3. – S. 3-4. (in Russian).
2. Radioactive Waste: A Review / D. Deng et al // Water Environment Research. – 2020. – Vol. 92, № 10. – P. 1818-1825. (in English).
3. Radioactive Waste Treatment Technology: A Review / G. Tochaikul et al // Kerntechnik. – 2022. – Vol. 87, № 2. – P. 208-225. (in English).
4. Methods of Thermal Treatment of Radioactive Waste / L. Fuks et al // Energies. – 2022. – Vol. 15, № 1, Art. 375. (in English).
5. Santana L.P. Management of Radioactive Waste: A Review / L.P. Santana // Proceedings of the International Academy of Ecology and Environmental Sciences. – 2016. – Vol. 6, № 2. – P. 38-43. (in English).
6. Walek J. Analysis of Thermophysical Properties of Electro Slag Remelting and Evaluation of Metallographic Cleanliness of Steel / J. Walek, A. Odehnalová, R. Kocich // Materials. – 2024. – Vol. 17, № 18, Art. 4613. (in English).
7. Numerical Investigation on the Electroslag Remelting of High Carbon Martensitic Stainless Steels / X. Liu et al // Metals. – 2023. – Vol. 13, № 3, Art. 482. (in English).
8. Dolzhikov S.A. Primenenie ehlektroshlakovogo pereplava dlya ochistki radioaktivnozagryaznennogo metalla / S.A. Dolzhikov, A.V. Pakhnits, N.E. Mukhamedov // Semipalatinskii ispytatel'nyi poligon: nasledie i perspektivy razvitiya nauchno-tekhnicheskogo potentsiala: materialy X Mezhdunarodnoi konferentsii (12-14 sentyabrya 2023 g.). – Kurchatov: RGP NYATs RK, 2023. – S. 47. (in Russian).
9. Ochistka stali ot radioaktivnogo zagryazneniya metodom ehlektroshlakovogo pereplava / A.D. Vurim i dr. // Vestnik NYATs RK. – 2002. – № 1. – S. 34-39. (in Russian).
10. Modelirovanie omicheskogo nagreva ehlektroda ustanovki ehlektroshlakovogo pereplava v programmnom pakete ANSYS / E.A. Қabdylқaқov i dr. // Vestnik NYATs RK. – 2025. – № 3. – S. 147-155. (in Russian).
11. Modelirovanie teplovogo sostoyaniya kristallizatora ustanovki ehlektroshlakovogo pereplava posle obrazovaniya rasplava metalla / E.A. Қabdylқaқov i dr. // Vestnik NYATs RK. – 2026. – № 2. – S. 167-175. (in Russian).
Review
For citations:
Kabdylkakov Y.A., Mukhamedov N.Y., Suraev A.S., Dolzhikov S.A., Pakhnits A.V. APPLICATION OF AN ELECTROSLAG REMELTING FACILITY FOR PROCESSING SOLID RADIOACTIVE WASTE FROM THE BN-350 REACTOR. Bulletin of Shakarim University. Technical Sciences. 2026;(3(23)):754-765. (In Russ.) https://doi.org/10.53360/2788-7995-2026-3(23)-76
JATS XML















