4-санға «Автоматтандыру және ақпараттық технологиялар», «Азық-түлік инженериясы және биотехнология», сондай-ақ «Химиялық технология» бағыттары бойынша мақалалар қабылдау жабылды.

Приём статей в четвёртый номер по направлениям «Автоматизация и информационные технологии», «Пищевая инженерия и биотехнология», а также «Химическая технология» закрыт.

Submissions for the fourth issue in the fields of Automation and Information Technology, Food Engineering and Biotechnology, as well as Chemical Technology, are now closed.

Preview

Шәкәрім Университетінің Хабаршысы. Техникалық ғылымдар сериясы

Шәкәрім Университетінің Хабаршысы. Техникалық ғылымдар сериясы

Кеңейтілген іздеу

ПОЛИОЛЕФИНДЕРДІҢ (ПП ЖӘНЕ ПЭ) ДЕСТРУКЦИЯ МЕХАНИЗМДЕРІ ЖӘНЕ БАСТАПҚЫ МЕН ҚАЙТАЛАМА ПОЛИОЛЕФИНДЕРДІҢ САЛЫСТЫРМАЛЫ СИПАТТАМАСЫ

https://doi.org/10.53360/2788-7995-2026-3(23)-89

Толық мәтін:

Аңдатпа

Бұл шолу жұмысы полиолефиндердің деструкциясы туралы соңғы ашық қолжетімді деректерді жүйелейді және полипропилен (ПП) мен полиэтиленнің (ПЭ), сондай-ақ бастапқы және қайталама материалдардың қартаю, өңдеу және қайта өңдеу кезіндегі айырмашылықтарына ерекше назар аударады. Талдауда фото-тотығу, термо-тотығу және термомеханикалық деструкция жолдары қарастырылып, олардың молекулалық архитектураға, молекулалық массаға, балқыма реологиясына, жылулық тұрақтылыққа және механикалық қасиеттерге әсері салыстырылды. Көрсетілгендей, полипропилен негізінен тізбектің үзілуі арқылы ыдырайды, өйткені үшінші реттік көміртек атомдары жоғары реакциялық қабілетке ие; соның салдарынан орташа молекулалық масса төмендеп, балқыма ағынының индексі көбіне артады. Полиэтиленде үзілу процестері тармақталумен және ішінара торланумен қатар жүреді, сондықтан тұтқырлықтың өзгерісі сызықтық емес сипат алып, тотығудың терең сатысында морттану қаупі өседі. Салыстырмалы деректер қайталама PE мен PP-де созылу беріктігі, соққыға төзімділік және үзілу кезіндегі салыстырмалы ұзару әдетте бастапқы материалдарға қарағанда төмендейтінін көрсетті. Дегенмен қоспа құрамын дұрыс таңдау, антиоксиданттық тұрақтандыру және реологияға негізделген сапаны бақылау қайта өңделген материалдардың қолданылу мүмкіндігін едәуір жақсартады. Практикалық тұрғыдан екіншілік полиолефиндерді бір ғана технологиялық көрсеткішке сүйенбей, деградация механизмдеріне негізделген кешенді диагностика арқылы, оның ішінде Фурье-түрлендіру инфрақызыл спектроскопиясы (FTIR), дифференциалды сканерлеуші калориметрия (DSC), эксклюзиялық хроматография (SEC), тотығу индукциясының температурасы (OIT) және реологиялық критерийлерді пайдалана отырып бағалау қажет.

Авторлар туралы

Я. О. Андриенко
Торайгыров университеті
Қазақстан

Ярослав Олегович Андриенко – «Химия және химиялық технологиялар» кафедрасының магистранты, 

140000, Қазақстан Республикасы, Павлодар қ., Ломов к-сі, 64


Мүдделер қақтығысы:

Авторы заявляют об отсутствии конфликта интересов



Р. М. Несмеянова
Торайгыров университеті
Қазақстан

Римма Михайловна Несмеянова – химия ғылымдарының кандидаты, қауымдастырылған профессор (доцент), «Химия және химиялық технологиялар» кафедрасының профессоры

140000, Қазақстан Республикасы, Павлодар қ., Ломов к-сі, 64


Мүдделер қақтығысы:

Авторы заявляют об отсутствии конфликта интересов



С. Р. Maсакбаева
Торайгыров университеті
Қазақстан

Софья Руслановна Масакбаева – химия ғылымдарының кандидаты, қауымдастырылған профессор (доцент), «Химия және химиялық технологиялар» кафедрасының профессоры

140000, Қазақстан Республикасы, Павлодар қ., Ломов к-сі, 64


Мүдделер қақтығысы:

Авторы заявляют об отсутствии конфликта интересов



С. Ю. Koвтаревa
Торайгыров университеті
Қазақстан

Светлана Юрьевна Ковтарева – «Химия және химиялық технологиялар» кафедрасының аға оқытушысы

140000, Қазақстан Республикасы, Павлодар қ., Ломов к-сі, 64


Мүдделер қақтығысы:

Авторы заявляют об отсутствии конфликта интересов



О. Е. Mукашев
Торайгыров университеті
Қазақстан

Олжас Ержанович Мукашев – «Химия және химиялық технологиялар» кафедрасының аға оқытушысы

140000, Қазақстан Республикасы, Павлодар қ., Ломов к-сі, 64


Мүдделер қақтығысы:

Авторы заявляют об отсутствии конфликта интересов



Әдебиет тізімі

1. Molecular pathways for polymer degradation during conventional processing, additive manufacturing, and mechanical recycling / D. Ceretti et al // Molecules. – 2023. – Vol. 28, № 5. – P. 2344. https://doi.org/10.3390/molecules28052344.

2. Strömberg E. The design of a test protocol to model the degradation of polyolefins during recycling and service life / E. Strömberg, S. Karlsson // Journal of Applied Polymer Science. – 2009. – Vol. 112, № 3. – P. 1835-1844. https://doi.org/10.1002/app.29724.

3. Schyns Z.O.G. Mechanical Recycling of Packaging Plastics: A Review / Z.O.G. Schyns, M.P. Shaver // Macromolecular Rapid Communications. – 2021. – Vol. 42, № 3. – P. 2000415. https://doi.org/10.1002/marc.202000415.

4. Mechanical reprocessing of polyolefin waste: A review / S. Yin et al // Polymer Engineering & Science. – 2015. – Vol. 55, № 12. – P. 2899-2909. https://doi.org/10.1002/pen.24182.

5. Technical, Economic, and Environmental Comparison of Closed-Loop Recycling Technologies for Common Plastics / T. Uekert et al // ACS Sustainable Chemistry & Engineering. – 2023. – Vol. 11, № 3. – P. 965-978. https://doi.org/10.1021/acssuschemeng.2c05497.

6. Gijsman P. Long term thermo-oxidative degradation and stabilization of polypropylene (PP) and the implications for its recyclability / P. Gijsman, R. Fiorio // Polymer Degradation and Stability. – 2023. – Vol. 208. – P. 110260. https://doi.org/10.1016/j.polymdegradstab.2023.110260.

7. Peterson J.D. Kinetics of the Thermal and Thermo-Oxidative Degradation of Polystyrene, Polyethylene and Poly(propylene) / J.D. Peterson, S. Vyazovkin, C.A. Wight // Macromolecular Chemistry and Physics. – 2001. – Vol. 202, № 6. – P. 775-784. https://doi.org/10.1002/1521-3935(20010301)202:6<775::aid-macp775>3.0.co;2-g.

8. Gijsman P. Review on the thermo-oxidative degradation of polymers during processing and in service / P. Gijsman // e-Polymers. – 2008. – Vol. 8, № 1. https://doi.org/10.1515/epoly.2008.8.1.727.

9. Pinheiro L. The role of chain scission and chain branching in high density polyethylene during thermo-mechanical degradation / L. Pinheiro, M. Chinelatto, S. Canevarolo // Polymer Degradation and Stability. – 2004. – Vol. 86, № 3. – P. 445-453. https://doi.org/10.1016/j.polymdegradstab.2004.05.016.

10. Qian S. Thermal degradation behavior of polypropylene in the melt state: molecular weight distribution changes and chain scission mechanism / S. Qian, T. Igarashi, K.-H. Nitta // Polymer Bulletin. – 2011. – Vol. 67, № 8. – P. 1661-1670. https://doi.org/10.1007/s00289-011-0560-6.

11. Zhiltsova T. Sustainable Polypropylene Blends: Balancing Recycled Content with Processability and Performance / T. Zhiltsova, M. Oliveira // Polymers. – 2025. – Vol. 17, № 11. – P. 1556. https://doi.org/10.3390/polym17111556.

12. Vilaplana F. Quality Concepts for the Improved Use of Recycled Polymeric Materials: A Review / F. Vilaplana, S. Karlsson // Macromolecular Materials and Engineering. – 2008. – Vol. 293, № 4. – P. 274-297. https://doi.org/10.1002/mame.200700393.

13. Mixed post-consumer recycled polyolefins as a property tuning material for virgin polypropylene / G.W. Curtzwiler et al // Journal of Cleaner Production. – 2019. – Vol. 239. – P. 117978. https://doi.org/10.1016/j.jclepro.2019.117978.

14. Defining quality by quantifying degradation in the mechanical recycling of polyethylene / A. Patel et al. // Nature Communications. – 2024. – Vol. 15, № 1. – P. 8733. https://doi.org/10.1038/s41467-024-52856-8.

15. Influence of Stabilization Additive on Rheological, Thermal and Mechanical Properties of Recycled Polypropylene / M. Mihelčič et al // Polymers. – 2022. Vol. 14, № 24. – P. 5438. https://doi.org/10.3390/polym14245438.

16. Pfaendner R. Restabilization - 30 years of research for quality improvement of recycled plastics review / R. Pfaendner // Polymer Degradation and Stability. – 2022. – Vol. 203. – P. 110082. https://doi.org/10.1016/j.polymdegradstab.2022.110082.

17. Du B. Study of Factors Affecting UV-Induced Photo-Degradation in Different Types of Polyethylene Sheets / B. Du, C. Lee, Y. Ji // Polymers. – 2024. – Vol. 16, № 19. – P. 2709. https://doi.org/10.3390/polym16192709.

18. Esmizadeh E. Degradation behavior of polypropylene during reprocessing and its biocomposites: Thermal and oxidative degradation kinetics / E. Esmizadeh, C. Tzoganakis, T. Mekonnen // Polymers. – 2020. – Vol. 12, № 8. – P. 1627. https://doi.org/10.3390/polym12081627.

19. Monitoring antioxidant consumption and build-up in polypropylene during open-loop and closedloop mechanical recycling / N. Knoben et al // Materials. – 2025. – Vol. 18, № 7. – P. 1640. https://doi.org/10.3390/ma18071640.

20. Degradation indicators in multiple recycling processing loops of impact polypropylene and high density polyethylene / L. Douiri et al // Polymer Degradation and Stability. – 2024. – Vol. 219. – P. 110617. https://doi.org/10.1016/j.polymdegradstab.2023.110617.

21. How small molecules affect the thermo-oxidative aging mechanism of polypropylene: A reactive molecular dynamics study / F. Zhang et al // Polymers. – 2021. – Vol. 13, № 8. – P. 1243. https://doi.org/10.3390/polym13081243.

22. Influence of the repeated extrusion on the degradation of polyethylene. Structural changes in low density polyethylene / J. Dostál et al // European Polymer Journal. – 2008. – Vol. 44, № 8. – P. 2652-2658. https://doi.org/10.1016/j.eurpolymj.2008.05.028.

23. Comprehensive investigation into the impact of degradation of recycled polyethylene and recycled polypropylene on the thermo-mechanical characteristics and thermal stability of blends / W. Zhang et al // Molecules. – 2024. – Vol. 29, № 18. – P. 4499. https://doi.org/10.3390/molecules29184499.

24. da Costa H.M. Degradation of polypropylene (PP) during multiple extrusions: Thermal analysis, mechanical properties and analysis of variance / H.M. da Costa, V.D. Ramos, M.G. de Oliveira // Polymer Testing. – 2007. – Vol. 26, № 5. – P. 676-684. https://doi.org/10.1016/j.polymertesting.2007.04.003.

25. Processability and mechanical properties of extensively recycled high density polyethylene / P. Oblak et al // Polymer Degradation and Stability. – 2015. – Vol. 114. – P. 133-145. https://doi.org/10.1016/j.polymdegradstab.2015.01.012.

26. Effect of hindered piperidine light stabilizer molecular structure and UV-absorber addition on the oxidation of HDPE. Part 1: Long-term thermal and photo-oxidation studies / C.M. Liauw et al // Journal of Vinyl and Additive Technology. – 2004. – Vol. 10, № 2. – P. 79-87. https://doi.org/10.1002/vnl.20011.

27. A fundamental study on photo-oxidative degradation of linear low density polyethylene films at embrittlement / Y.C. Hsu et al // Polymer. – 2012. – Vol. 53, № 12. – P. 2385-2393. https://doi.org/10.1016/j.polymer.2012.03.044.

28. Thermo-oxidative degradation of isotactic polypropylene at high temperatures: phenolic antioxidants versus HAS / R. Gensler et al // Polymer Degradation and Stability. – 2000. – Vol. 67, № 2. – P. 195-208. https://doi.org/10.1016/S0141-3910(99)00113-5.

29. Thermo-oxidative stability of PP waste films studied by imaging chemiluminescence / G. Ahlblad et al // Polymer Degradation and Stability. – 2001. – Vol. 73, № 1. – P. 15-22. https://doi.org/10.1016/S0141-3910(01)00038-6.

30. Recycling of metallocene isotactic polypropylene: importance of antioxidants / E. Blázquez-Blázquez et al // Journal of Thermal Analysis and Calorimetry. – 2022. – Vol. 147, № 23. – P. 13363-13374. https://doi.org/10.1007/s10973-022-11505-2.

31. Focke W.W. Stabilization of low-density polyethylene films containing metal stearates as photodegradants / W.W. Focke, R.P. Mashele, N.S. Nhlapo // Journal of Vinyl and Additive Technology. – 2011. – Vol. 17, № 1. – P. 21-27. https://doi.org/10.1002/vnl.20248.

32. Degradation and stabilization of polyolefins from municipal plastic waste during multiple extrusions under different reprocessing conditions / A. Santos et al // Polymer Degradation and Stability. – 2002. – Vol. 77, № 3. – P. 441-447. https://doi.org/10.1016/S0141-3910(02)00101-5.

33. Delva L. The Effect of Multiple Extrusions on the Properties of Montmorillonite Filled Polypropylene / L. Delva, K. Ragaert, J. Degrieck, L. Cardon // Polymers. – 2014. – Vol. 6, № 12. – P. 2912-2927. https://doi.org/10.3390/polym6122912.

34. Abbas-Abadi M.S. Effect of the melt flow index and melt flow rate on the thermal degradation kinetics of commercial polyolefins / M.S. Abbas-Abadi, M.N. Haghighi, H. Yeganeh // Journal of Applied Polymer Science. – 2012. – Vol. 126, № 5. – P. 1739-1745. https://doi.org/10.1002/app.36775.

35. Berzin F. Rheological behavior of controlled-rheology polypropylenes obtained by peroxidepromoted degradation during extrusion: Comparison between homopolymer and copolymer / F. Berzin, B. Vergnes, L. Delamare // Journal of Applied Polymer Science. – 2001. – Vol. 80, № 8. – P. 1243-1252. https://doi.org/10.1002/app.1210.

36. Thermo-mechanical degradation of polypropylene (PP) and low-density polyethylene (LDPE) blends exposed to simulated recycling / S. Saikrishnan et al // Polymer Degradation and Stability. – 2020. – Vol. 182. – P. 109390. https://doi.org/10.1016/j.polymdegradstab.2020.109390.

37. Recent developments in recycling of post-consumer polyethylene waste / Y. Ma et al // Green Chemistry. – 2025. – Vol. 27. – P. 4040-4093. https://doi.org/10.1039/d4gc06566b.

38. Ballestar de las Heras R. Comparative analysis of the effects of incorporating post-industrial recycled LLDPE and post-consumer PE in films: Macrostructural and microstructural perspectives in the packaging industry / R. Ballestar de las Heras, X. Colom, J. Cañavate // Polymers. – 2024. – Vol.16, № 7. – P. 916. https://doi.org/10.3390/polym16070916.

39. Characterization of Composition and Structure-Property Relationships of Commercial PostConsumer Polyethylene and Polypropylene Recyclates / M. Gall et al // Polymers. – 2021. – Vol. 13, № 10. – P. 1574. https://doi.org/10.3390/polym13101574.

40. Investigating the effect of accelerated weathering on the mechanical and physical properties of high content plastic solid waste (PSW) blends with virgin linear low density polyethylene (LLDPE) / S. Al-Salem et al // Polymer Testing. – 2015. – Vol. 46. – P. 116-121. https://doi.org/10.1016/j.polymertesting.2015.07.008.

41. Oxidative depolymerization of polyethylene (PE), polypropylene (PP) and polystyrene (PS) wastes to value-added chemicals / H.S. Raby et al // Polymer Degradation and Stability. – 2025. – Vol. 242. – P. 111709. https://doi.org/10.1016/j.polymdegradstab.2025.111709.

42. Enhancement of second life cycle potential of polypropylene exposed to combined thermooxidative aging during an automotive use phase and thermo-mechanical aging in mechanical recycling processing / S. Hoebel et al // Journal of Material Cycles and Waste Management. – 2026. – Vol. 28. – P. 3496–3512. https://doi.org/10.1007/s10163-026-02632-1.

43. Gnoffo C. Mechanical recycling of HDPE-based packaging: Interplay between cross contamination, aging and reprocessing / C. Gnoffo, R. Arrigo, A. Frache // Polymer Degradation and Stability. – 2025. – Vol. 236. – P. 111290. https://doi.org/10.1016/j.polymdegradstab.2025.111290.

44. Jansson A. Degradation of post-consumer polypropylene materials exposed to simulated recycling—mechanical properties / A. Jansson, K. Möller, T. Gevert // Polymer Degradation and Stability. – 2003. – Vol. 82, № 1. – P. 37-46. https://doi.org/10.1016/S0141-3910(03)00160-5.

45. Accurate determination of polyethylene (PE) and polypropylene (PP) content in polyolefin blends using machine learning-assisted differential scanning calorimetry (DSC) analysis / A. Bashirgonbadi et al // Polymer Testing. – 2024. – Vol. 131. – P. 108353. https://doi.org/10.1016/j.polymertesting.2024.108353.

46. Properties of Recycled High Density Polyethylene/Recycled Polypropylene Blends: Effect of Maleic Anhydride Polypropylene / A.M. Atiqah et al // Key Engineering Materials. – 2013. – Vol. 594-595. – P. 837-841. https://doi.org/10.4028/www.scientific.net/KEM.594-595.837.

47. Polypropylene/polyethylene blends as models for high-impact propylene-ethylene copolymers, part 2: Relation between composition and mechanical performance / C. Kock et al // Journal of Applied Polymer Science. – 2013. – Vol. 130, № 1. – P. 287-296. https://doi.org/10.1002/app.39181.

48. Bertin S. Study and characterization of virgin and recycled LDPE/PP blends / S. Bertin, J.J. Robin // European Polymer Journal. – 2002. – Vol. 38, № 11. – P. 2255-2264. https://doi.org/10.1016/S0014-3057(02)00111-8.

49. Recycled and restabilized HDPE bottle crates: Retention of critical properties after heat aging / C.N. Kartalis et al // Polymer Engineering & Science. – 2001. – Vol. 41, № 5. – P. 771-781. https://doi.org/10.1002/pen.10774.

50. Dopico-García M.S. Antioxidant Content of and Migration from Commercial Polyethylene, Polypropylene, and Polyvinyl Chloride Packages / M.S. Dopico-García, J.M. López-Vilariñó, M.V. González-Rodríguez // Journal of Agricultural and Food Chemistry. – 2007. – Vol. 55, № 8. – P. 3225-3231. https://doi.org/10.1021/jf070102+.

51. Characterization of Morphological, Thermal, and Mechanical Performances and UV Ageing Degradation of Post-Consumer Recycled Polypropylene for Automotive Industries / M. Arese et al // Materials. – 2025. – Vol. 18, № 5. – P. 1090. https://doi.org/10.3390/ma18051090.

52. Prior L. Assessment of the Impact of Superficial Contamination and Thermo-Oxidative Degradation on the Properties of Post-Consumer Recycled Polypropylene / L. Prior, M.S.A. Oliveira, T. Zhiltsova // Materials. – 2023. – Vol. 16, № 3. – P. 1198. https://doi.org/10.3390/ma16031198.

53. Jiménez A. Processing and properties of recycled polypropylene modified with elastomers / A. Jiménez, L. Torre, J. Kenny // Plastics, Rubber and Composites. – 2003. – Vol. 32, № 8-9. – P. 357-367. https://doi.org/10.1179/146580103225004126.

54. Towards a Circular Economy: Study of the Mechanical, Thermal, and Electrical Properties of Recycled Polypropylene and Their Composite Materials / T. Jamnongkan et al // Polymers. – 2022. – Vol. 14, № 24. – P. 5482. https://doi.org/10.3390/polym14245482.


Рецензия

Дәйектеу үшін:


Андриенко Я.О., Несмеянова Р.М., Maсакбаева С.Р., Koвтаревa С.Ю., Mукашев О.Е. ПОЛИОЛЕФИНДЕРДІҢ (ПП ЖӘНЕ ПЭ) ДЕСТРУКЦИЯ МЕХАНИЗМДЕРІ ЖӘНЕ БАСТАПҚЫ МЕН ҚАЙТАЛАМА ПОЛИОЛЕФИНДЕРДІҢ САЛЫСТЫРМАЛЫ СИПАТТАМАСЫ. Шәкәрім Университетінің Хабаршысы. Техникалық ғылымдар сериясы. 2026;(3(23)):893-904. https://doi.org/10.53360/2788-7995-2026-3(23)-89

For citation:


Andriyenko Y.O., Nesmeyanova R.M., Massakbayeva S.R., Kovtareva S.Yu., Mukashev O.E. MECHANISMS OF POLYOLEFIN (PP AND PE) DEGRADATION AND COMPARATIVE CHARACTERISTICS OF PRIMARY AND SECONDARY POLYOLEFINS. Bulletin of Shakarim University. Technical Sciences. 2026;(3(23)):893-904. https://doi.org/10.53360/2788-7995-2026-3(23)-89

Қараулар: 12

JATS XML


ISSN 2788-7995 (Print)
ISSN 3006-0524 (Online)
X