<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE article PUBLIC "-//NLM//DTD JATS (Z39.96) Journal Publishing DTD v1.3 20210610//EN" "JATS-journalpublishing1-3.dtd">
<article article-type="review-article" dtd-version="1.3" xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xml:lang="ru"><front><journal-meta><journal-id journal-id-type="publisher-id">kaz44</journal-id><journal-title-group><journal-title xml:lang="ru">Вестник Университета Шакарима. Серия технические науки</journal-title><trans-title-group xml:lang="en"><trans-title>Bulletin of Shakarim University. Technical Sciences</trans-title></trans-title-group></journal-title-group><issn pub-type="ppub">2788-7995</issn><issn pub-type="epub">3006-0524</issn><publisher><publisher-name>«Шәкәрім университеті» КеАҚ</publisher-name></publisher></journal-meta><article-meta><article-id pub-id-type="doi">10.53360/2788-7995-2026-3(23)-89</article-id><article-id custom-type="elpub" pub-id-type="custom">kaz44-2744</article-id><article-categories><subj-group subj-group-type="heading"><subject>Research Article</subject></subj-group><subj-group subj-group-type="section-heading" xml:lang="ru"><subject>ХИМИЧЕСКАЯ ТЕХНОЛОГИЯ (ОРИГИНАЛЬНАЯ СТАТЬЯ)</subject></subj-group><subj-group subj-group-type="section-heading" xml:lang="en"><subject>CHEMICAL TECHNOLOGY (ORIGINAL ARTICLE)</subject></subj-group></article-categories><title-group><article-title>МЕХАНИЗМЫ ДЕСТРУКЦИИ ПОЛИОЛЕФИНОВ (ПП И ПЭ) И СРАВНИТЕЛЬНАЯ ХАРАКТЕРИСТИКА ПЕРВИЧНЫХ И ВТОРИЧНЫХ ПОЛИОЛЕФИНОВ</article-title><trans-title-group xml:lang="en"><trans-title>MECHANISMS OF POLYOLEFIN (PP AND PE) DEGRADATION AND COMPARATIVE CHARACTERISTICS OF PRIMARY AND SECONDARY POLYOLEFINS</trans-title></trans-title-group></title-group><contrib-group><contrib contrib-type="author" corresp="yes"><contrib-id contrib-id-type="orcid">https://orcid.org/0009-0003-6295-2170</contrib-id><name-alternatives><name name-style="eastern" xml:lang="ru"><surname>Андриенко</surname><given-names>Я. О.</given-names></name><name name-style="western" xml:lang="en"><surname>Andriyenko</surname><given-names>Y. O.</given-names></name></name-alternatives><bio xml:lang="ru"><p>Ярослав Олегович Андриенко – магистрант кафедры «Химия и химические технологии»</p><p>140000, Республика Казахстан, г. Павлодар, ул. Ломова, 64</p></bio><bio xml:lang="en"><p>Yaroslav Andriyenko – master's student of the department «Chemistry and Chemical Technology»</p><p>140000, Republic of Kazakhstan, Pavlodar, Lomov St 64</p></bio><email xlink:type="simple">yaroslav.andrienko2002@gmail.com</email><xref ref-type="aff" rid="aff-1"/></contrib><contrib contrib-type="author" corresp="yes"><contrib-id contrib-id-type="orcid">https://orcid.org/0000-0001-5949-4023</contrib-id><name-alternatives><name name-style="eastern" xml:lang="ru"><surname>Несмеянова</surname><given-names>Р. М.</given-names></name><name name-style="western" xml:lang="en"><surname>Nesmeyanova</surname><given-names>R. M.</given-names></name></name-alternatives><bio xml:lang="ru"><p>Римма Михайловна Несмеянова – кандидат химических наук, ассоциированный профессор (доцент), профессор кафедры «Химия и химические технологии»</p><p>140000, Республика Казахстан, г. Павлодар, ул. Ломова, 64</p></bio><bio xml:lang="en"><p>Rimma Nesmeyanova – candidate of Chemical Science, associate Professor, Professor of the Department «Chemistry and Chemical Technology»</p><p>140000, Republic of Kazakhstan, Pavlodar, Lomov St 64</p></bio><email xlink:type="simple">nesmeyanova.r@tou.edu.kz</email><xref ref-type="aff" rid="aff-1"/></contrib><contrib contrib-type="author" corresp="yes"><contrib-id contrib-id-type="orcid">https://orcid.org/0000-0001-8668-472X</contrib-id><name-alternatives><name name-style="eastern" xml:lang="ru"><surname>Масакбаева</surname><given-names>С. Р.</given-names></name><name name-style="western" xml:lang="en"><surname>Massakbayeva</surname><given-names>S. R.</given-names></name></name-alternatives><bio xml:lang="ru"><p>Софья Руслановна Масакбаева – кандидат химических наук, ассоциированный профессор (доцент), профессор кафедры «Химия и химические технологии»</p><p>140000, Республика Казахстан, г. Павлодар, ул. Ломова, 64</p></bio><bio xml:lang="en"><p>Sofya Massakbayeva – candidate of Chemical Science, associate Professor, Professor of the Department «Chemistry and Chemical Technology»</p><p>140000, Republic of Kazakhstan, Pavlodar, Lomov St 64</p></bio><email xlink:type="simple">sofyamassakbayeva@gmail.com</email><xref ref-type="aff" rid="aff-1"/></contrib><contrib contrib-type="author" corresp="yes"><contrib-id contrib-id-type="orcid">https://orcid.org/0000-0002-3946-1344</contrib-id><name-alternatives><name name-style="eastern" xml:lang="ru"><surname>Ковтарева</surname><given-names>С. Ю.</given-names></name><name name-style="western" xml:lang="en"><surname>Kovtareva</surname><given-names>S. Yu.</given-names></name></name-alternatives><bio xml:lang="ru"><p>Светлана Юрьевна Ковтарева – старший преподаватель кафедры «Химия и химические технологии»</p><p>140000, Республика Казахстан, г. Павлодар, ул. Ломова, 64</p></bio><bio xml:lang="en"><p>Svetlana Kovtareva – senior teacher at the Department «Chemistry and Chemical Technology»</p><p>140000, Republic of Kazakhstan, Pavlodar, Lomov St 64</p></bio><email xlink:type="simple">kovtarsw@gmail.com</email><xref ref-type="aff" rid="aff-1"/></contrib><contrib contrib-type="author" corresp="yes"><contrib-id contrib-id-type="orcid">https://orcid.org/0000-0002-8040-6515</contrib-id><name-alternatives><name name-style="eastern" xml:lang="ru"><surname>Мукашев</surname><given-names>О. Е.</given-names></name><name name-style="western" xml:lang="en"><surname>Mukashev</surname><given-names>O. E.</given-names></name></name-alternatives><bio xml:lang="ru"><p>Олжас Ержанович Мукашев – старший преподаватель кафедры «Химия и химические технологии»</p><p>140000, Республика Казахстан, г. Павлодар, ул. Ломова, 64</p></bio><bio xml:lang="en"><p>Olzhas Mukashev – senior teacher at the Department «Chemistry and Chemical Technology»</p><p>140000, Republic of Kazakhstan, Pavlodar, Lomov St 64</p></bio><email xlink:type="simple">mukashev.o@teachers.tou.edu.kz</email><xref ref-type="aff" rid="aff-1"/></contrib></contrib-group><aff-alternatives id="aff-1"><aff xml:lang="ru"><institution>Торайгыров университет </institution><country>Казахстан</country></aff><aff xml:lang="en"><institution>Toraigyrov University</institution><country>Kazakhstan</country></aff></aff-alternatives><pub-date pub-type="collection"><year>2026</year></pub-date><pub-date pub-type="epub"><day>20</day><month>11</month><year>2026</year></pub-date><volume>0</volume><issue>3(23)</issue><fpage>893</fpage><lpage>904</lpage><permissions><copyright-statement>Copyright &amp;#x00A9; Андриенко Я.О., Несмеянова Р.М., Масакбаева С.Р., Ковтарева С.Ю., Мукашев О.Е., 2026</copyright-statement><copyright-year>2026</copyright-year><copyright-holder xml:lang="ru">Андриенко Я.О., Несмеянова Р.М., Масакбаева С.Р., Ковтарева С.Ю., Мукашев О.Е.</copyright-holder><copyright-holder xml:lang="en">Andriyenko Y.O., Nesmeyanova R.M., Massakbayeva S.R., Kovtareva S.Y., Mukashev O.E.</copyright-holder><license xml:lang="ru" license-type="creative-commons-attribution" xlink:href="https://creativecommons.org/licenses/by/4.0/" xlink:type="simple"><license-p>Данная работа распространяется под лицензией Creative Commons Attribution 4.0.</license-p></license><license xml:lang="en" license-type="creative-commons-attribution" xlink:href="https://creativecommons.org/licenses/by/4.0/" xlink:type="simple"><license-p>This work is licensed under a Creative Commons Attribution 4.0 License.</license-p></license></permissions><self-uri xlink:href="https://tech.vestnik.shakarim.kz/jour/article/view/2744">https://tech.vestnik.shakarim.kz/jour/article/view/2744</self-uri><abstract><p>В обзоре систематизированы современные открытые данные о деструкции полиолефинов с акцентом на полипропилен (ПП) и полиэтилен (ПЭ), а также на различия между первичными и вторичными материалами при старении, переработке и повторной переработке. Рассмотрены фотоокислительные, термоокислительные и термомеханические пути деградации и показано, как они отражаются на молекулярной архитектуре, молекулярной массе, реологических свойствах расплава, термической стабильности и механических характеристиках. Показано, что полипропилен преимущественно деградирует по механизму разрыва цепи вследствие высокой реакционной способности третичных атомов углерода; поэтому средняя молекулярная масса снижается, а показатель текучести расплава обычно возрастает. Для полиэтилена характерен более сложный сценарий, при котором разрыв цепи сочетается с разветвлением и частичным сшиванием, что приводит к нелинейному изменению вязкости и повышенному риску охрупчивания на поздних стадиях окисления. Сопоставление количественных данных показывает, что вторичные PE и PP, как правило, уступают первичным материалам по прочности при растяжении, ударной вязкости и относительному удлинению при разрыве. Вместе с тем правильно подобранный состав смесей, антиоксидантная стабилизация и реологический контроль качества способны существенно расширить область применения вторичных полиолефинов. Практический вывод заключается в том, что вторичные полиолефины следует оценивать с использованием диагностики, основанной на механизмах деградации, включая инфракрасную Фурье-спектроскопию (FTIR), дифференциальную сканирующую калориметрию (DSC), эксклюзионную хроматографию (SEC), температура окислительной индукции (OIT) и реологические параметры, а не полагаться на один единственный параметр переработки.</p></abstract><trans-abstract xml:lang="en"><p>This review systematizes recent open-access data on the degradation of polyolefins, with emphasis on polypropylene (PP) and polyethylene (PE) and on the differences between virgin and secondary materials during ageing, processing, and reprocessing. The analysis covers photo-oxidative, thermo-oxidative, and thermomechanical pathways and relates them to changes in molecular architecture, molecular weight, melt rheology, thermal stability, and mechanical performance. It is shown that polypropylene degrades predominantly through chain scission because tertiary carbon atoms are highly reactive; as a result, the average molecular weight decreases and the melt flow index usually increases. Polyethylene exhibits a more complex scenario in which chain scission competes with branching and partial cross-linking, causing nonlinear viscosity behavior and a higher risk of embrittlement at advanced oxidation stages. Comparative data indicate that recycled PE and PP generally lose tensile strength, impact resistance, and elongation at break relative to virgin grades, although properly selected blend composition, antioxidant stabilization, and rheologybased quality control can significantly improve recyclate performance. The practical conclusion is that recycled polyolefins should be evaluated using mechanism-based diagnostics, including Fourier-transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), size-exclusion chromatography (SEC), oxidation induction temperature (OIT), and rheological criteria, rather than relying on a single processing parameter.</p></trans-abstract><kwd-group xml:lang="ru"><kwd>полиолефины</kwd><kwd>фотоокисление</kwd><kwd>термоокисление</kwd><kwd>механическая переработка</kwd><kwd>вторичные полимеры</kwd><kwd>стабилизация</kwd></kwd-group><kwd-group xml:lang="en"><kwd>polyolefins</kwd><kwd>photo-oxidation</kwd><kwd>thermo-oxidation</kwd><kwd>mechanical recycling</kwd><kwd>secondary polymers</kwd><kwd>stabilization</kwd></kwd-group><funding-group><funding-statement xml:lang="en">This research is funded by the Committee of Science of the Ministry of Science and Higher Education of the Republic of Kazakhstan (grant IRN AP26199041 «Chemical and Technological Aspects of Creating Composites through Thermoplastic Processing of Polymer Waste»).</funding-statement></funding-group></article-meta></front><back><ref-list><title>References</title><ref id="cit1"><label>1</label><citation-alternatives><mixed-citation xml:lang="ru">Molecular pathways for polymer degradation during conventional processing, additive manufacturing, and mechanical recycling / D. Ceretti et al // Molecules. – 2023. – Vol. 28, № 5. – P. 2344. https://doi.org/10.3390/molecules28052344.</mixed-citation><mixed-citation xml:lang="en">Molecular pathways for polymer degradation during conventional processing, additive manufacturing, and mechanical recycling / D. Ceretti et al // Molecules. – 2023. – Vol. 28, № 5. – P. 2344. https://doi.org/10.3390/molecules28052344.</mixed-citation></citation-alternatives></ref><ref id="cit2"><label>2</label><citation-alternatives><mixed-citation xml:lang="ru">Strömberg E. The design of a test protocol to model the degradation of polyolefins during recycling and service life / E. Strömberg, S. Karlsson // Journal of Applied Polymer Science. – 2009. – Vol. 112, № 3. – P. 1835-1844. https://doi.org/10.1002/app.29724.</mixed-citation><mixed-citation xml:lang="en">Strömberg E. The design of a test protocol to model the degradation of polyolefins during recycling and service life / E. Strömberg, S. Karlsson // Journal of Applied Polymer Science. – 2009. – Vol. 112, № 3. – P. 1835-1844. https://doi.org/10.1002/app.29724.</mixed-citation></citation-alternatives></ref><ref id="cit3"><label>3</label><citation-alternatives><mixed-citation xml:lang="ru">Schyns Z.O.G. Mechanical Recycling of Packaging Plastics: A Review / Z.O.G. Schyns, M.P. Shaver // Macromolecular Rapid Communications. – 2021. – Vol. 42, № 3. – P. 2000415. https://doi.org/10.1002/marc.202000415.</mixed-citation><mixed-citation xml:lang="en">Schyns Z.O.G. Mechanical Recycling of Packaging Plastics: A Review / Z.O.G. Schyns, M.P. Shaver // Macromolecular Rapid Communications. – 2021. – Vol. 42, № 3. – P. 2000415. https://doi.org/10.1002/marc.202000415.</mixed-citation></citation-alternatives></ref><ref id="cit4"><label>4</label><citation-alternatives><mixed-citation xml:lang="ru">Mechanical reprocessing of polyolefin waste: A review / S. Yin et al // Polymer Engineering &amp; Science. – 2015. – Vol. 55, № 12. – P. 2899-2909. https://doi.org/10.1002/pen.24182.</mixed-citation><mixed-citation xml:lang="en">Mechanical reprocessing of polyolefin waste: A review / S. Yin et al // Polymer Engineering &amp; Science. – 2015. – Vol. 55, № 12. – P. 2899-2909. https://doi.org/10.1002/pen.24182.</mixed-citation></citation-alternatives></ref><ref id="cit5"><label>5</label><citation-alternatives><mixed-citation xml:lang="ru">Technical, Economic, and Environmental Comparison of Closed-Loop Recycling Technologies for Common Plastics / T. Uekert et al // ACS Sustainable Chemistry &amp; Engineering. – 2023. – Vol. 11, № 3. – P. 965-978. https://doi.org/10.1021/acssuschemeng.2c05497.</mixed-citation><mixed-citation xml:lang="en">Technical, Economic, and Environmental Comparison of Closed-Loop Recycling Technologies for Common Plastics / T. Uekert et al // ACS Sustainable Chemistry &amp; Engineering. – 2023. – Vol. 11, № 3. – P. 965-978. https://doi.org/10.1021/acssuschemeng.2c05497.</mixed-citation></citation-alternatives></ref><ref id="cit6"><label>6</label><citation-alternatives><mixed-citation xml:lang="ru">Gijsman P. Long term thermo-oxidative degradation and stabilization of polypropylene (PP) and the implications for its recyclability / P. Gijsman, R. Fiorio // Polymer Degradation and Stability. – 2023. – Vol. 208. – P. 110260. https://doi.org/10.1016/j.polymdegradstab.2023.110260.</mixed-citation><mixed-citation xml:lang="en">Gijsman P. Long term thermo-oxidative degradation and stabilization of polypropylene (PP) and the implications for its recyclability / P. Gijsman, R. Fiorio // Polymer Degradation and Stability. – 2023. – Vol. 208. – P. 110260. https://doi.org/10.1016/j.polymdegradstab.2023.110260.</mixed-citation></citation-alternatives></ref><ref id="cit7"><label>7</label><citation-alternatives><mixed-citation xml:lang="ru">Peterson J.D. Kinetics of the Thermal and Thermo-Oxidative Degradation of Polystyrene, Polyethylene and Poly(propylene) / J.D. Peterson, S. Vyazovkin, C.A. Wight // Macromolecular Chemistry and Physics. – 2001. – Vol. 202, № 6. – P. 775-784. https://doi.org/10.1002/1521-3935(20010301)202:6&lt;775::aid-macp775&gt;3.0.co;2-g.</mixed-citation><mixed-citation xml:lang="en">Peterson J.D. Kinetics of the Thermal and Thermo-Oxidative Degradation of Polystyrene, Polyethylene and Poly(propylene) / J.D. Peterson, S. Vyazovkin, C.A. Wight // Macromolecular Chemistry and Physics. – 2001. – Vol. 202, № 6. – P. 775-784. https://doi.org/10.1002/1521-3935(20010301)202:6&lt;775::aid-macp775&gt;3.0.co;2-g.</mixed-citation></citation-alternatives></ref><ref id="cit8"><label>8</label><citation-alternatives><mixed-citation xml:lang="ru">Gijsman P. Review on the thermo-oxidative degradation of polymers during processing and in service / P. Gijsman // e-Polymers. – 2008. – Vol. 8, № 1. https://doi.org/10.1515/epoly.2008.8.1.727.</mixed-citation><mixed-citation xml:lang="en">Gijsman P. Review on the thermo-oxidative degradation of polymers during processing and in service / P. Gijsman // e-Polymers. – 2008. – Vol. 8, № 1. https://doi.org/10.1515/epoly.2008.8.1.727.</mixed-citation></citation-alternatives></ref><ref id="cit9"><label>9</label><citation-alternatives><mixed-citation xml:lang="ru">Pinheiro L. The role of chain scission and chain branching in high density polyethylene during thermo-mechanical degradation / L. Pinheiro, M. Chinelatto, S. Canevarolo // Polymer Degradation and Stability. – 2004. – Vol. 86, № 3. – P. 445-453. https://doi.org/10.1016/j.polymdegradstab.2004.05.016.</mixed-citation><mixed-citation xml:lang="en">Pinheiro L. The role of chain scission and chain branching in high density polyethylene during thermo-mechanical degradation / L. Pinheiro, M. Chinelatto, S. Canevarolo // Polymer Degradation and Stability. – 2004. – Vol. 86, № 3. – P. 445-453. https://doi.org/10.1016/j.polymdegradstab.2004.05.016.</mixed-citation></citation-alternatives></ref><ref id="cit10"><label>10</label><citation-alternatives><mixed-citation xml:lang="ru">Qian S. Thermal degradation behavior of polypropylene in the melt state: molecular weight distribution changes and chain scission mechanism / S. Qian, T. Igarashi, K.-H. Nitta // Polymer Bulletin. – 2011. – Vol. 67, № 8. – P. 1661-1670. https://doi.org/10.1007/s00289-011-0560-6.</mixed-citation><mixed-citation xml:lang="en">Qian S. Thermal degradation behavior of polypropylene in the melt state: molecular weight distribution changes and chain scission mechanism / S. Qian, T. Igarashi, K.-H. Nitta // Polymer Bulletin. – 2011. – Vol. 67, № 8. – P. 1661-1670. https://doi.org/10.1007/s00289-011-0560-6.</mixed-citation></citation-alternatives></ref><ref id="cit11"><label>11</label><citation-alternatives><mixed-citation xml:lang="ru">Zhiltsova T. Sustainable Polypropylene Blends: Balancing Recycled Content with Processability and Performance / T. Zhiltsova, M. Oliveira // Polymers. – 2025. – Vol. 17, № 11. – P. 1556. https://doi.org/10.3390/polym17111556.</mixed-citation><mixed-citation xml:lang="en">Zhiltsova T. Sustainable Polypropylene Blends: Balancing Recycled Content with Processability and Performance / T. Zhiltsova, M. Oliveira // Polymers. – 2025. – Vol. 17, № 11. – P. 1556. https://doi.org/10.3390/polym17111556.</mixed-citation></citation-alternatives></ref><ref id="cit12"><label>12</label><citation-alternatives><mixed-citation xml:lang="ru">Vilaplana F. Quality Concepts for the Improved Use of Recycled Polymeric Materials: A Review / F. Vilaplana, S. Karlsson // Macromolecular Materials and Engineering. – 2008. – Vol. 293, № 4. – P. 274-297. https://doi.org/10.1002/mame.200700393.</mixed-citation><mixed-citation xml:lang="en">Vilaplana F. Quality Concepts for the Improved Use of Recycled Polymeric Materials: A Review / F. Vilaplana, S. Karlsson // Macromolecular Materials and Engineering. – 2008. – Vol. 293, № 4. – P. 274-297. https://doi.org/10.1002/mame.200700393.</mixed-citation></citation-alternatives></ref><ref id="cit13"><label>13</label><citation-alternatives><mixed-citation xml:lang="ru">Mixed post-consumer recycled polyolefins as a property tuning material for virgin polypropylene / G.W. Curtzwiler et al // Journal of Cleaner Production. – 2019. – Vol. 239. – P. 117978. https://doi.org/10.1016/j.jclepro.2019.117978.</mixed-citation><mixed-citation xml:lang="en">Mixed post-consumer recycled polyolefins as a property tuning material for virgin polypropylene / G.W. Curtzwiler et al // Journal of Cleaner Production. – 2019. – Vol. 239. – P. 117978. https://doi.org/10.1016/j.jclepro.2019.117978.</mixed-citation></citation-alternatives></ref><ref id="cit14"><label>14</label><citation-alternatives><mixed-citation xml:lang="ru">Defining quality by quantifying degradation in the mechanical recycling of polyethylene / A. Patel et al. // Nature Communications. – 2024. – Vol. 15, № 1. – P. 8733. https://doi.org/10.1038/s41467-024-52856-8.</mixed-citation><mixed-citation xml:lang="en">Defining quality by quantifying degradation in the mechanical recycling of polyethylene / A. Patel et al. // Nature Communications. – 2024. – Vol. 15, № 1. – P. 8733. https://doi.org/10.1038/s41467-024-52856-8.</mixed-citation></citation-alternatives></ref><ref id="cit15"><label>15</label><citation-alternatives><mixed-citation xml:lang="ru">Influence of Stabilization Additive on Rheological, Thermal and Mechanical Properties of Recycled Polypropylene / M. Mihelčič et al // Polymers. – 2022. Vol. 14, № 24. – P. 5438. https://doi.org/10.3390/polym14245438.</mixed-citation><mixed-citation xml:lang="en">Influence of Stabilization Additive on Rheological, Thermal and Mechanical Properties of Recycled Polypropylene / M. Mihelčič et al // Polymers. – 2022. Vol. 14, № 24. – P. 5438. https://doi.org/10.3390/polym14245438.</mixed-citation></citation-alternatives></ref><ref id="cit16"><label>16</label><citation-alternatives><mixed-citation xml:lang="ru">Pfaendner R. Restabilization - 30 years of research for quality improvement of recycled plastics review / R. Pfaendner // Polymer Degradation and Stability. – 2022. – Vol. 203. – P. 110082. https://doi.org/10.1016/j.polymdegradstab.2022.110082.</mixed-citation><mixed-citation xml:lang="en">Pfaendner R. Restabilization - 30 years of research for quality improvement of recycled plastics review / R. Pfaendner // Polymer Degradation and Stability. – 2022. – Vol. 203. – P. 110082. https://doi.org/10.1016/j.polymdegradstab.2022.110082.</mixed-citation></citation-alternatives></ref><ref id="cit17"><label>17</label><citation-alternatives><mixed-citation xml:lang="ru">Du B. Study of Factors Affecting UV-Induced Photo-Degradation in Different Types of Polyethylene Sheets / B. Du, C. Lee, Y. Ji // Polymers. – 2024. – Vol. 16, № 19. – P. 2709. https://doi.org/10.3390/polym16192709.</mixed-citation><mixed-citation xml:lang="en">Du B. Study of Factors Affecting UV-Induced Photo-Degradation in Different Types of Polyethylene Sheets / B. Du, C. Lee, Y. Ji // Polymers. – 2024. – Vol. 16, № 19. – P. 2709. https://doi.org/10.3390/polym16192709.</mixed-citation></citation-alternatives></ref><ref id="cit18"><label>18</label><citation-alternatives><mixed-citation xml:lang="ru">Esmizadeh E. Degradation behavior of polypropylene during reprocessing and its biocomposites: Thermal and oxidative degradation kinetics / E. Esmizadeh, C. Tzoganakis, T. Mekonnen // Polymers. – 2020. – Vol. 12, № 8. – P. 1627. https://doi.org/10.3390/polym12081627.</mixed-citation><mixed-citation xml:lang="en">Esmizadeh E. Degradation behavior of polypropylene during reprocessing and its biocomposites: Thermal and oxidative degradation kinetics / E. Esmizadeh, C. Tzoganakis, T. Mekonnen // Polymers. – 2020. – Vol. 12, № 8. – P. 1627. https://doi.org/10.3390/polym12081627.</mixed-citation></citation-alternatives></ref><ref id="cit19"><label>19</label><citation-alternatives><mixed-citation xml:lang="ru">Monitoring antioxidant consumption and build-up in polypropylene during open-loop and closedloop mechanical recycling / N. Knoben et al // Materials. – 2025. – Vol. 18, № 7. – P. 1640. https://doi.org/10.3390/ma18071640.</mixed-citation><mixed-citation xml:lang="en">Monitoring antioxidant consumption and build-up in polypropylene during open-loop and closedloop mechanical recycling / N. Knoben et al // Materials. – 2025. – Vol. 18, № 7. – P. 1640. https://doi.org/10.3390/ma18071640.</mixed-citation></citation-alternatives></ref><ref id="cit20"><label>20</label><citation-alternatives><mixed-citation xml:lang="ru">Degradation indicators in multiple recycling processing loops of impact polypropylene and high density polyethylene / L. Douiri et al // Polymer Degradation and Stability. – 2024. – Vol. 219. – P. 110617. https://doi.org/10.1016/j.polymdegradstab.2023.110617.</mixed-citation><mixed-citation xml:lang="en">Degradation indicators in multiple recycling processing loops of impact polypropylene and high density polyethylene / L. Douiri et al // Polymer Degradation and Stability. – 2024. – Vol. 219. – P. 110617. https://doi.org/10.1016/j.polymdegradstab.2023.110617.</mixed-citation></citation-alternatives></ref><ref id="cit21"><label>21</label><citation-alternatives><mixed-citation xml:lang="ru">How small molecules affect the thermo-oxidative aging mechanism of polypropylene: A reactive molecular dynamics study / F. Zhang et al // Polymers. – 2021. – Vol. 13, № 8. – P. 1243. https://doi.org/10.3390/polym13081243.</mixed-citation><mixed-citation xml:lang="en">How small molecules affect the thermo-oxidative aging mechanism of polypropylene: A reactive molecular dynamics study / F. Zhang et al // Polymers. – 2021. – Vol. 13, № 8. – P. 1243. https://doi.org/10.3390/polym13081243.</mixed-citation></citation-alternatives></ref><ref id="cit22"><label>22</label><citation-alternatives><mixed-citation xml:lang="ru">Influence of the repeated extrusion on the degradation of polyethylene. Structural changes in low density polyethylene / J. Dostál et al // European Polymer Journal. – 2008. – Vol. 44, № 8. – P. 2652-2658. https://doi.org/10.1016/j.eurpolymj.2008.05.028.</mixed-citation><mixed-citation xml:lang="en">Influence of the repeated extrusion on the degradation of polyethylene. Structural changes in low density polyethylene / J. Dostál et al // European Polymer Journal. – 2008. – Vol. 44, № 8. – P. 2652-2658. https://doi.org/10.1016/j.eurpolymj.2008.05.028.</mixed-citation></citation-alternatives></ref><ref id="cit23"><label>23</label><citation-alternatives><mixed-citation xml:lang="ru">Comprehensive investigation into the impact of degradation of recycled polyethylene and recycled polypropylene on the thermo-mechanical characteristics and thermal stability of blends / W. Zhang et al // Molecules. – 2024. – Vol. 29, № 18. – P. 4499. https://doi.org/10.3390/molecules29184499.</mixed-citation><mixed-citation xml:lang="en">Comprehensive investigation into the impact of degradation of recycled polyethylene and recycled polypropylene on the thermo-mechanical characteristics and thermal stability of blends / W. Zhang et al // Molecules. – 2024. – Vol. 29, № 18. – P. 4499. https://doi.org/10.3390/molecules29184499.</mixed-citation></citation-alternatives></ref><ref id="cit24"><label>24</label><citation-alternatives><mixed-citation xml:lang="ru">da Costa H.M. Degradation of polypropylene (PP) during multiple extrusions: Thermal analysis, mechanical properties and analysis of variance / H.M. da Costa, V.D. Ramos, M.G. de Oliveira // Polymer Testing. – 2007. – Vol. 26, № 5. – P. 676-684. https://doi.org/10.1016/j.polymertesting.2007.04.003.</mixed-citation><mixed-citation xml:lang="en">da Costa H.M. Degradation of polypropylene (PP) during multiple extrusions: Thermal analysis, mechanical properties and analysis of variance / H.M. da Costa, V.D. Ramos, M.G. de Oliveira // Polymer Testing. – 2007. – Vol. 26, № 5. – P. 676-684. https://doi.org/10.1016/j.polymertesting.2007.04.003.</mixed-citation></citation-alternatives></ref><ref id="cit25"><label>25</label><citation-alternatives><mixed-citation xml:lang="ru">Processability and mechanical properties of extensively recycled high density polyethylene / P. Oblak et al // Polymer Degradation and Stability. – 2015. – Vol. 114. – P. 133-145. https://doi.org/10.1016/j.polymdegradstab.2015.01.012.</mixed-citation><mixed-citation xml:lang="en">Processability and mechanical properties of extensively recycled high density polyethylene / P. Oblak et al // Polymer Degradation and Stability. – 2015. – Vol. 114. – P. 133-145. https://doi.org/10.1016/j.polymdegradstab.2015.01.012.</mixed-citation></citation-alternatives></ref><ref id="cit26"><label>26</label><citation-alternatives><mixed-citation xml:lang="ru">Effect of hindered piperidine light stabilizer molecular structure and UV-absorber addition on the oxidation of HDPE. Part 1: Long-term thermal and photo-oxidation studies / C.M. Liauw et al // Journal of Vinyl and Additive Technology. – 2004. – Vol. 10, № 2. – P. 79-87. https://doi.org/10.1002/vnl.20011.</mixed-citation><mixed-citation xml:lang="en">Effect of hindered piperidine light stabilizer molecular structure and UV-absorber addition on the oxidation of HDPE. Part 1: Long-term thermal and photo-oxidation studies / C.M. Liauw et al // Journal of Vinyl and Additive Technology. – 2004. – Vol. 10, № 2. – P. 79-87. https://doi.org/10.1002/vnl.20011.</mixed-citation></citation-alternatives></ref><ref id="cit27"><label>27</label><citation-alternatives><mixed-citation xml:lang="ru">A fundamental study on photo-oxidative degradation of linear low density polyethylene films at embrittlement / Y.C. Hsu et al // Polymer. – 2012. – Vol. 53, № 12. – P. 2385-2393. https://doi.org/10.1016/j.polymer.2012.03.044.</mixed-citation><mixed-citation xml:lang="en">A fundamental study on photo-oxidative degradation of linear low density polyethylene films at embrittlement / Y.C. Hsu et al // Polymer. – 2012. – Vol. 53, № 12. – P. 2385-2393. https://doi.org/10.1016/j.polymer.2012.03.044.</mixed-citation></citation-alternatives></ref><ref id="cit28"><label>28</label><citation-alternatives><mixed-citation xml:lang="ru">Thermo-oxidative degradation of isotactic polypropylene at high temperatures: phenolic antioxidants versus HAS / R. Gensler et al // Polymer Degradation and Stability. – 2000. – Vol. 67, № 2. – P. 195-208. https://doi.org/10.1016/S0141-3910(99)00113-5.</mixed-citation><mixed-citation xml:lang="en">Thermo-oxidative degradation of isotactic polypropylene at high temperatures: phenolic antioxidants versus HAS / R. Gensler et al // Polymer Degradation and Stability. – 2000. – Vol. 67, № 2. – P. 195-208. https://doi.org/10.1016/S0141-3910(99)00113-5.</mixed-citation></citation-alternatives></ref><ref id="cit29"><label>29</label><citation-alternatives><mixed-citation xml:lang="ru">Thermo-oxidative stability of PP waste films studied by imaging chemiluminescence / G. Ahlblad et al // Polymer Degradation and Stability. – 2001. – Vol. 73, № 1. – P. 15-22. https://doi.org/10.1016/S0141-3910(01)00038-6.</mixed-citation><mixed-citation xml:lang="en">Thermo-oxidative stability of PP waste films studied by imaging chemiluminescence / G. Ahlblad et al // Polymer Degradation and Stability. – 2001. – Vol. 73, № 1. – P. 15-22. https://doi.org/10.1016/S0141-3910(01)00038-6.</mixed-citation></citation-alternatives></ref><ref id="cit30"><label>30</label><citation-alternatives><mixed-citation xml:lang="ru">Recycling of metallocene isotactic polypropylene: importance of antioxidants / E. Blázquez-Blázquez et al // Journal of Thermal Analysis and Calorimetry. – 2022. – Vol. 147, № 23. – P. 13363-13374. https://doi.org/10.1007/s10973-022-11505-2.</mixed-citation><mixed-citation xml:lang="en">Recycling of metallocene isotactic polypropylene: importance of antioxidants / E. BlázquezBlázquez et al // Journal of Thermal Analysis and Calorimetry. – 2022. – Vol. 147, № 23. – P. 13363-13374. https://doi.org/10.1007/s10973-022-11505-2.</mixed-citation></citation-alternatives></ref><ref id="cit31"><label>31</label><citation-alternatives><mixed-citation xml:lang="ru">Focke W.W. Stabilization of low-density polyethylene films containing metal stearates as photodegradants / W.W. Focke, R.P. Mashele, N.S. Nhlapo // Journal of Vinyl and Additive Technology. – 2011. – Vol. 17, № 1. – P. 21-27. https://doi.org/10.1002/vnl.20248.</mixed-citation><mixed-citation xml:lang="en">Focke W.W. Stabilization of low-density polyethylene films containing metal stearates as photodegradants / W.W. Focke, R.P. Mashele, N.S. Nhlapo // Journal of Vinyl and Additive Technology. – 2011. – Vol. 17, № 1. – P. 21-27. https://doi.org/10.1002/vnl.20248.</mixed-citation></citation-alternatives></ref><ref id="cit32"><label>32</label><citation-alternatives><mixed-citation xml:lang="ru">Degradation and stabilization of polyolefins from municipal plastic waste during multiple extrusions under different reprocessing conditions / A. Santos et al // Polymer Degradation and Stability. – 2002. – Vol. 77, № 3. – P. 441-447. https://doi.org/10.1016/S0141-3910(02)00101-5.</mixed-citation><mixed-citation xml:lang="en">Degradation and stabilization of polyolefins from municipal plastic waste during multiple extrusions under different reprocessing conditions / A. Santos et al // Polymer Degradation and Stability. – 2002. – Vol. 77, № 3. – P. 441-447. https://doi.org/10.1016/S0141-3910(02)00101-5.</mixed-citation></citation-alternatives></ref><ref id="cit33"><label>33</label><citation-alternatives><mixed-citation xml:lang="ru">Delva L. The Effect of Multiple Extrusions on the Properties of Montmorillonite Filled Polypropylene / L. Delva, K. Ragaert, J. Degrieck, L. Cardon // Polymers. – 2014. – Vol. 6, № 12. – P. 2912-2927. https://doi.org/10.3390/polym6122912.</mixed-citation><mixed-citation xml:lang="en">Delva L. The Effect of Multiple Extrusions on the Properties of Montmorillonite Filled Polypropylene / L. Delva, K. Ragaert, J. Degrieck, L. Cardon // Polymers. – 2014. – Vol. 6, № 12. – P. 2912-2927. https://doi.org/10.3390/polym6122912.</mixed-citation></citation-alternatives></ref><ref id="cit34"><label>34</label><citation-alternatives><mixed-citation xml:lang="ru">Abbas-Abadi M.S. Effect of the melt flow index and melt flow rate on the thermal degradation kinetics of commercial polyolefins / M.S. Abbas-Abadi, M.N. Haghighi, H. Yeganeh // Journal of Applied Polymer Science. – 2012. – Vol. 126, № 5. – P. 1739-1745. https://doi.org/10.1002/app.36775.</mixed-citation><mixed-citation xml:lang="en">Abbas-Abadi M.S. Effect of the melt flow index and melt flow rate on the thermal degradation kinetics of commercial polyolefins / M.S. Abbas-Abadi, M.N. Haghighi, H. Yeganeh // Journal of Applied Polymer Science. – 2012. – Vol. 126, № 5. – P. 1739-1745. https://doi.org/10.1002/app.36775.</mixed-citation></citation-alternatives></ref><ref id="cit35"><label>35</label><citation-alternatives><mixed-citation xml:lang="ru">Berzin F. Rheological behavior of controlled-rheology polypropylenes obtained by peroxidepromoted degradation during extrusion: Comparison between homopolymer and copolymer / F. Berzin, B. Vergnes, L. Delamare // Journal of Applied Polymer Science. – 2001. – Vol. 80, № 8. – P. 1243-1252. https://doi.org/10.1002/app.1210.</mixed-citation><mixed-citation xml:lang="en">Berzin F. Rheological behavior of controlled-rheology polypropylenes obtained by peroxidepromoted degradation during extrusion: Comparison between homopolymer and copolymer / F. Berzin, B. Vergnes, L. Delamare // Journal of Applied Polymer Science. – 2001. – Vol. 80, № 8. – P. 1243-1252. https://doi.org/10.1002/app.1210.</mixed-citation></citation-alternatives></ref><ref id="cit36"><label>36</label><citation-alternatives><mixed-citation xml:lang="ru">Thermo-mechanical degradation of polypropylene (PP) and low-density polyethylene (LDPE) blends exposed to simulated recycling / S. Saikrishnan et al // Polymer Degradation and Stability. – 2020. – Vol. 182. – P. 109390. https://doi.org/10.1016/j.polymdegradstab.2020.109390.</mixed-citation><mixed-citation xml:lang="en">Thermo-mechanical degradation of polypropylene (PP) and low-density polyethylene (LDPE) blends exposed to simulated recycling / S. Saikrishnan et al // Polymer Degradation and Stability. – 2020. – Vol. 182. – P. 109390. https://doi.org/10.1016/j.polymdegradstab.2020.109390.</mixed-citation></citation-alternatives></ref><ref id="cit37"><label>37</label><citation-alternatives><mixed-citation xml:lang="ru">Recent developments in recycling of post-consumer polyethylene waste / Y. Ma et al // Green Chemistry. – 2025. – Vol. 27. – P. 4040-4093. https://doi.org/10.1039/d4gc06566b.</mixed-citation><mixed-citation xml:lang="en">Recent developments in recycling of post-consumer polyethylene waste / Y. Ma et al // Green Chemistry. – 2025. – Vol. 27. – P. 4040-4093. https://doi.org/10.1039/d4gc06566b.</mixed-citation></citation-alternatives></ref><ref id="cit38"><label>38</label><citation-alternatives><mixed-citation xml:lang="ru">Ballestar de las Heras R. Comparative analysis of the effects of incorporating post-industrial recycled LLDPE and post-consumer PE in films: Macrostructural and microstructural perspectives in the packaging industry / R. Ballestar de las Heras, X. Colom, J. Cañavate // Polymers. – 2024. – Vol.16, № 7. – P. 916. https://doi.org/10.3390/polym16070916.</mixed-citation><mixed-citation xml:lang="en">Ballestar de las Heras R. Comparative analysis of the effects of incorporating post-industrial recycled LLDPE and post-consumer PE in films: Macrostructural and microstructural perspectives in the packaging industry / R. Ballestar de las Heras, X. Colom, J. Cañavate // Polymers. – 2024. – Vol.16, № 7. – P. 916. https://doi.org/10.3390/polym16070916.</mixed-citation></citation-alternatives></ref><ref id="cit39"><label>39</label><citation-alternatives><mixed-citation xml:lang="ru">Characterization of Composition and Structure-Property Relationships of Commercial PostConsumer Polyethylene and Polypropylene Recyclates / M. Gall et al // Polymers. – 2021. – Vol. 13, № 10. – P. 1574. https://doi.org/10.3390/polym13101574.</mixed-citation><mixed-citation xml:lang="en">Characterization of Composition and Structure-Property Relationships of Commercial PostConsumer Polyethylene and Polypropylene Recyclates / M. Gall et al // Polymers. – 2021. – Vol. 13, № 10. – P. 1574. https://doi.org/10.3390/polym13101574.</mixed-citation></citation-alternatives></ref><ref id="cit40"><label>40</label><citation-alternatives><mixed-citation xml:lang="ru">Investigating the effect of accelerated weathering on the mechanical and physical properties of high content plastic solid waste (PSW) blends with virgin linear low density polyethylene (LLDPE) / S. Al-Salem et al // Polymer Testing. – 2015. – Vol. 46. – P. 116-121. https://doi.org/10.1016/j.polymertesting.2015.07.008.</mixed-citation><mixed-citation xml:lang="en">Investigating the effect of accelerated weathering on the mechanical and physical properties of high content plastic solid waste (PSW) blends with virgin linear low density polyethylene (LLDPE) / S. Al-Salem et al // Polymer Testing. – 2015. – Vol. 46. – P. 116-121. https://doi.org/10.1016/j.polymertesting.2015.07.008.</mixed-citation></citation-alternatives></ref><ref id="cit41"><label>41</label><citation-alternatives><mixed-citation xml:lang="ru">Oxidative depolymerization of polyethylene (PE), polypropylene (PP) and polystyrene (PS) wastes to value-added chemicals / H.S. Raby et al // Polymer Degradation and Stability. – 2025. – Vol. 242. – P. 111709. https://doi.org/10.1016/j.polymdegradstab.2025.111709.</mixed-citation><mixed-citation xml:lang="en">Oxidative depolymerization of polyethylene (PE), polypropylene (PP) and polystyrene (PS) wastes to value-added chemicals / H.S. Raby et al // Polymer Degradation and Stability. – 2025. – Vol. 242. – P. 111709. https://doi.org/10.1016/j.polymdegradstab.2025.111709.</mixed-citation></citation-alternatives></ref><ref id="cit42"><label>42</label><citation-alternatives><mixed-citation xml:lang="ru">Enhancement of second life cycle potential of polypropylene exposed to combined thermooxidative aging during an automotive use phase and thermo-mechanical aging in mechanical recycling processing / S. Hoebel et al // Journal of Material Cycles and Waste Management. – 2026. – Vol. 28. – P. 3496–3512. https://doi.org/10.1007/s10163-026-02632-1.</mixed-citation><mixed-citation xml:lang="en">Enhancement of second life cycle potential of polypropylene exposed to combined thermooxidative aging during an automotive use phase and thermo-mechanical aging in mechanical recycling processing / S. Hoebel et al // Journal of Material Cycles and Waste Management. – 2026. – Vol. 28. – P. 3496–3512. https://doi.org/10.1007/s10163-026-02632-1.</mixed-citation></citation-alternatives></ref><ref id="cit43"><label>43</label><citation-alternatives><mixed-citation xml:lang="ru">Gnoffo C. Mechanical recycling of HDPE-based packaging: Interplay between cross contamination, aging and reprocessing / C. Gnoffo, R. Arrigo, A. Frache // Polymer Degradation and Stability. – 2025. – Vol. 236. – P. 111290. https://doi.org/10.1016/j.polymdegradstab.2025.111290.</mixed-citation><mixed-citation xml:lang="en">Gnoffo C. Mechanical recycling of HDPE-based packaging: Interplay between cross contamination, aging and reprocessing / C. Gnoffo, R. Arrigo, A. Frache // Polymer Degradation and Stability. – 2025. – Vol. 236. – P. 111290. https://doi.org/10.1016/j.polymdegradstab.2025.111290.</mixed-citation></citation-alternatives></ref><ref id="cit44"><label>44</label><citation-alternatives><mixed-citation xml:lang="ru">Jansson A. Degradation of post-consumer polypropylene materials exposed to simulated recycling—mechanical properties / A. Jansson, K. Möller, T. Gevert // Polymer Degradation and Stability. – 2003. – Vol. 82, № 1. – P. 37-46. https://doi.org/10.1016/S0141-3910(03)00160-5.</mixed-citation><mixed-citation xml:lang="en">Jansson A. Degradation of post-consumer polypropylene materials exposed to simulated recycling—mechanical properties / A. Jansson, K. Möller, T. Gevert // Polymer Degradation and Stability. – 2003. – Vol. 82, № 1. – P. 37-46. https://doi.org/10.1016/S0141-3910(03)00160-5.</mixed-citation></citation-alternatives></ref><ref id="cit45"><label>45</label><citation-alternatives><mixed-citation xml:lang="ru">Accurate determination of polyethylene (PE) and polypropylene (PP) content in polyolefin blends using machine learning-assisted differential scanning calorimetry (DSC) analysis / A. Bashirgonbadi et al // Polymer Testing. – 2024. – Vol. 131. – P. 108353. https://doi.org/10.1016/j.polymertesting.2024.108353.</mixed-citation><mixed-citation xml:lang="en">Accurate determination of polyethylene (PE) and polypropylene (PP) content in polyolefin blends using machine learning-assisted differential scanning calorimetry (DSC) analysis / A. Bashirgonbadi et al // Polymer Testing. – 2024. – Vol. 131. – P. 108353. https://doi.org/10.1016/j.polymertesting.2024.108353.</mixed-citation></citation-alternatives></ref><ref id="cit46"><label>46</label><citation-alternatives><mixed-citation xml:lang="ru">Properties of Recycled High Density Polyethylene/Recycled Polypropylene Blends: Effect of Maleic Anhydride Polypropylene / A.M. Atiqah et al // Key Engineering Materials. – 2013. – Vol. 594-595. – P. 837-841. https://doi.org/10.4028/www.scientific.net/KEM.594-595.837.</mixed-citation><mixed-citation xml:lang="en">Properties of Recycled High Density Polyethylene/Recycled Polypropylene Blends: Effect of Maleic Anhydride Polypropylene / A.M. Atiqah et al // Key Engineering Materials. – 2013. – Vol. 594-595. – P. 837-841. https://doi.org/10.4028/www.scientific.net/KEM.594-595.837.</mixed-citation></citation-alternatives></ref><ref id="cit47"><label>47</label><citation-alternatives><mixed-citation xml:lang="ru">Polypropylene/polyethylene blends as models for high-impact propylene-ethylene copolymers, part 2: Relation between composition and mechanical performance / C. Kock et al // Journal of Applied Polymer Science. – 2013. – Vol. 130, № 1. – P. 287-296. https://doi.org/10.1002/app.39181.</mixed-citation><mixed-citation xml:lang="en">Polypropylene/polyethylene blends as models for high-impact propylene-ethylene copolymers, part 2: Relation between composition and mechanical performance / C. Kock et al // Journal of Applied Polymer Science. – 2013. – Vol. 130, № 1. – P. 287-296. https://doi.org/10.1002/app.39181.</mixed-citation></citation-alternatives></ref><ref id="cit48"><label>48</label><citation-alternatives><mixed-citation xml:lang="ru">Bertin S. Study and characterization of virgin and recycled LDPE/PP blends / S. Bertin, J.J. Robin // European Polymer Journal. – 2002. – Vol. 38, № 11. – P. 2255-2264. https://doi.org/10.1016/S0014-3057(02)00111-8.</mixed-citation><mixed-citation xml:lang="en">Bertin S. Study and characterization of virgin and recycled LDPE/PP blends / S. Bertin, J.J. Robin // European Polymer Journal. – 2002. – Vol. 38, № 11. – P. 2255-2264. https://doi.org/10.1016/S0014-3057(02)00111-8.</mixed-citation></citation-alternatives></ref><ref id="cit49"><label>49</label><citation-alternatives><mixed-citation xml:lang="ru">Recycled and restabilized HDPE bottle crates: Retention of critical properties after heat aging / C.N. Kartalis et al // Polymer Engineering &amp; Science. – 2001. – Vol. 41, № 5. – P. 771-781. https://doi.org/10.1002/pen.10774.</mixed-citation><mixed-citation xml:lang="en">Recycled and restabilized HDPE bottle crates: Retention of critical properties after heat aging / C.N. Kartalis et al // Polymer Engineering &amp; Science. – 2001. – Vol. 41, № 5. – P. 771-781. https://doi.org/10.1002/pen.10774.</mixed-citation></citation-alternatives></ref><ref id="cit50"><label>50</label><citation-alternatives><mixed-citation xml:lang="ru">Dopico-García M.S. Antioxidant Content of and Migration from Commercial Polyethylene, Polypropylene, and Polyvinyl Chloride Packages / M.S. Dopico-García, J.M. López-Vilariñó, M.V. González-Rodríguez // Journal of Agricultural and Food Chemistry. – 2007. – Vol. 55, № 8. – P. 3225-3231. https://doi.org/10.1021/jf070102+.</mixed-citation><mixed-citation xml:lang="en">Dopico-García M.S. Antioxidant Content of and Migration from Commercial Polyethylene, Polypropylene, and Polyvinyl Chloride Packages / M.S. Dopico-García, J.M. López-Vilariñó, M.V. González-Rodríguez // Journal of Agricultural and Food Chemistry. – 2007. – Vol. 55, № 8. – P. 3225-3231. https://doi.org/10.1021/jf070102+.</mixed-citation></citation-alternatives></ref><ref id="cit51"><label>51</label><citation-alternatives><mixed-citation xml:lang="ru">Characterization of Morphological, Thermal, and Mechanical Performances and UV Ageing Degradation of Post-Consumer Recycled Polypropylene for Automotive Industries / M. Arese et al // Materials. – 2025. – Vol. 18, № 5. – P. 1090. https://doi.org/10.3390/ma18051090.</mixed-citation><mixed-citation xml:lang="en">Characterization of Morphological, Thermal, and Mechanical Performances and UV Ageing Degradation of Post-Consumer Recycled Polypropylene for Automotive Industries / M. Arese et al // Materials. – 2025. – Vol. 18, № 5. – P. 1090. https://doi.org/10.3390/ma18051090.</mixed-citation></citation-alternatives></ref><ref id="cit52"><label>52</label><citation-alternatives><mixed-citation xml:lang="ru">Prior L. Assessment of the Impact of Superficial Contamination and Thermo-Oxidative Degradation on the Properties of Post-Consumer Recycled Polypropylene / L. Prior, M.S.A. Oliveira, T. Zhiltsova // Materials. – 2023. – Vol. 16, № 3. – P. 1198. https://doi.org/10.3390/ma16031198.</mixed-citation><mixed-citation xml:lang="en">Prior L. Assessment of the Impact of Superficial Contamination and Thermo-Oxidative Degradation on the Properties of Post-Consumer Recycled Polypropylene / L. Prior, M.S.A. Oliveira, T. Zhiltsova // Materials. – 2023. – Vol. 16, № 3. – P. 1198. https://doi.org/10.3390/ma16031198.</mixed-citation></citation-alternatives></ref><ref id="cit53"><label>53</label><citation-alternatives><mixed-citation xml:lang="ru">Jiménez A. Processing and properties of recycled polypropylene modified with elastomers / A. Jiménez, L. Torre, J. Kenny // Plastics, Rubber and Composites. – 2003. – Vol. 32, № 8-9. – P. 357-367. https://doi.org/10.1179/146580103225004126.</mixed-citation><mixed-citation xml:lang="en">Jiménez A. Processing and properties of recycled polypropylene modified with elastomers / A. Jiménez, L. Torre, J. Kenny // Plastics, Rubber and Composites. – 2003. – Vol. 32, № 8-9. – P. 357-367. https://doi.org/10.1179/146580103225004126.</mixed-citation></citation-alternatives></ref><ref id="cit54"><label>54</label><citation-alternatives><mixed-citation xml:lang="ru">Towards a Circular Economy: Study of the Mechanical, Thermal, and Electrical Properties of Recycled Polypropylene and Their Composite Materials / T. Jamnongkan et al // Polymers. – 2022. – Vol. 14, № 24. – P. 5482. https://doi.org/10.3390/polym14245482.</mixed-citation><mixed-citation xml:lang="en">Towards a Circular Economy: Study of the Mechanical, Thermal, and Electrical Properties of Recycled Polypropylene and Their Composite Materials / T. Jamnongkan et al // Polymers. – 2022. – Vol. 14, № 24. – P. 5482. https://doi.org/10.3390/polym14245482.</mixed-citation></citation-alternatives></ref></ref-list><fn-group><fn fn-type="conflict"><p>The authors declare that there are no conflicts of interest present.</p></fn></fn-group></back></article>
