MECHANISMS OF POLYOLEFIN (PP AND PE) DEGRADATION AND COMPARATIVE CHARACTERISTICS OF PRIMARY AND SECONDARY POLYOLEFINS
https://doi.org/10.53360/2788-7995-2026-3(23)-89
Abstract
This review systematizes recent open-access data on the degradation of polyolefins, with emphasis on polypropylene (PP) and polyethylene (PE) and on the differences between virgin and secondary materials during ageing, processing, and reprocessing. The analysis covers photo-oxidative, thermo-oxidative, and thermomechanical pathways and relates them to changes in molecular architecture, molecular weight, melt rheology, thermal stability, and mechanical performance. It is shown that polypropylene degrades predominantly through chain scission because tertiary carbon atoms are highly reactive; as a result, the average molecular weight decreases and the melt flow index usually increases. Polyethylene exhibits a more complex scenario in which chain scission competes with branching and partial cross-linking, causing nonlinear viscosity behavior and a higher risk of embrittlement at advanced oxidation stages. Comparative data indicate that recycled PE and PP generally lose tensile strength, impact resistance, and elongation at break relative to virgin grades, although properly selected blend composition, antioxidant stabilization, and rheologybased quality control can significantly improve recyclate performance. The practical conclusion is that recycled polyolefins should be evaluated using mechanism-based diagnostics, including Fourier-transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), size-exclusion chromatography (SEC), oxidation induction temperature (OIT), and rheological criteria, rather than relying on a single processing parameter.
Keywords
About the Authors
Y. O. AndriyenkoKazakhstan
Yaroslav Andriyenko – master's student of the department «Chemistry and Chemical Technology»
140000, Republic of Kazakhstan, Pavlodar, Lomov St 64
Competing Interests:
Авторы заявляют об отсутствии конфликта интересов
R. M. Nesmeyanova
Kazakhstan
Rimma Nesmeyanova – candidate of Chemical Science, associate Professor, Professor of the Department «Chemistry and Chemical Technology»
140000, Republic of Kazakhstan, Pavlodar, Lomov St 64
Competing Interests:
Авторы заявляют об отсутствии конфликта интересов
S. R. Massakbayeva
Kazakhstan
Sofya Massakbayeva – candidate of Chemical Science, associate Professor, Professor of the Department «Chemistry and Chemical Technology»
140000, Republic of Kazakhstan, Pavlodar, Lomov St 64
Competing Interests:
Авторы заявляют об отсутствии конфликта интересов
S. Yu. Kovtareva
Kazakhstan
Svetlana Kovtareva – senior teacher at the Department «Chemistry and Chemical Technology»
140000, Republic of Kazakhstan, Pavlodar, Lomov St 64
Competing Interests:
Авторы заявляют об отсутствии конфликта интересов
O. E. Mukashev
Kazakhstan
Olzhas Mukashev – senior teacher at the Department «Chemistry and Chemical Technology»
140000, Republic of Kazakhstan, Pavlodar, Lomov St 64
Competing Interests:
Авторы заявляют об отсутствии конфликта интересов
References
1. Molecular pathways for polymer degradation during conventional processing, additive manufacturing, and mechanical recycling / D. Ceretti et al // Molecules. – 2023. – Vol. 28, № 5. – P. 2344. https://doi.org/10.3390/molecules28052344.
2. Strömberg E. The design of a test protocol to model the degradation of polyolefins during recycling and service life / E. Strömberg, S. Karlsson // Journal of Applied Polymer Science. – 2009. – Vol. 112, № 3. – P. 1835-1844. https://doi.org/10.1002/app.29724.
3. Schyns Z.O.G. Mechanical Recycling of Packaging Plastics: A Review / Z.O.G. Schyns, M.P. Shaver // Macromolecular Rapid Communications. – 2021. – Vol. 42, № 3. – P. 2000415. https://doi.org/10.1002/marc.202000415.
4. Mechanical reprocessing of polyolefin waste: A review / S. Yin et al // Polymer Engineering & Science. – 2015. – Vol. 55, № 12. – P. 2899-2909. https://doi.org/10.1002/pen.24182.
5. Technical, Economic, and Environmental Comparison of Closed-Loop Recycling Technologies for Common Plastics / T. Uekert et al // ACS Sustainable Chemistry & Engineering. – 2023. – Vol. 11, № 3. – P. 965-978. https://doi.org/10.1021/acssuschemeng.2c05497.
6. Gijsman P. Long term thermo-oxidative degradation and stabilization of polypropylene (PP) and the implications for its recyclability / P. Gijsman, R. Fiorio // Polymer Degradation and Stability. – 2023. – Vol. 208. – P. 110260. https://doi.org/10.1016/j.polymdegradstab.2023.110260.
7. Peterson J.D. Kinetics of the Thermal and Thermo-Oxidative Degradation of Polystyrene, Polyethylene and Poly(propylene) / J.D. Peterson, S. Vyazovkin, C.A. Wight // Macromolecular Chemistry and Physics. – 2001. – Vol. 202, № 6. – P. 775-784. https://doi.org/10.1002/1521-3935(20010301)202:6<775::aid-macp775>3.0.co;2-g.
8. Gijsman P. Review on the thermo-oxidative degradation of polymers during processing and in service / P. Gijsman // e-Polymers. – 2008. – Vol. 8, № 1. https://doi.org/10.1515/epoly.2008.8.1.727.
9. Pinheiro L. The role of chain scission and chain branching in high density polyethylene during thermo-mechanical degradation / L. Pinheiro, M. Chinelatto, S. Canevarolo // Polymer Degradation and Stability. – 2004. – Vol. 86, № 3. – P. 445-453. https://doi.org/10.1016/j.polymdegradstab.2004.05.016.
10. Qian S. Thermal degradation behavior of polypropylene in the melt state: molecular weight distribution changes and chain scission mechanism / S. Qian, T. Igarashi, K.-H. Nitta // Polymer Bulletin. – 2011. – Vol. 67, № 8. – P. 1661-1670. https://doi.org/10.1007/s00289-011-0560-6.
11. Zhiltsova T. Sustainable Polypropylene Blends: Balancing Recycled Content with Processability and Performance / T. Zhiltsova, M. Oliveira // Polymers. – 2025. – Vol. 17, № 11. – P. 1556. https://doi.org/10.3390/polym17111556.
12. Vilaplana F. Quality Concepts for the Improved Use of Recycled Polymeric Materials: A Review / F. Vilaplana, S. Karlsson // Macromolecular Materials and Engineering. – 2008. – Vol. 293, № 4. – P. 274-297. https://doi.org/10.1002/mame.200700393.
13. Mixed post-consumer recycled polyolefins as a property tuning material for virgin polypropylene / G.W. Curtzwiler et al // Journal of Cleaner Production. – 2019. – Vol. 239. – P. 117978. https://doi.org/10.1016/j.jclepro.2019.117978.
14. Defining quality by quantifying degradation in the mechanical recycling of polyethylene / A. Patel et al. // Nature Communications. – 2024. – Vol. 15, № 1. – P. 8733. https://doi.org/10.1038/s41467-024-52856-8.
15. Influence of Stabilization Additive on Rheological, Thermal and Mechanical Properties of Recycled Polypropylene / M. Mihelčič et al // Polymers. – 2022. Vol. 14, № 24. – P. 5438. https://doi.org/10.3390/polym14245438.
16. Pfaendner R. Restabilization - 30 years of research for quality improvement of recycled plastics review / R. Pfaendner // Polymer Degradation and Stability. – 2022. – Vol. 203. – P. 110082. https://doi.org/10.1016/j.polymdegradstab.2022.110082.
17. Du B. Study of Factors Affecting UV-Induced Photo-Degradation in Different Types of Polyethylene Sheets / B. Du, C. Lee, Y. Ji // Polymers. – 2024. – Vol. 16, № 19. – P. 2709. https://doi.org/10.3390/polym16192709.
18. Esmizadeh E. Degradation behavior of polypropylene during reprocessing and its biocomposites: Thermal and oxidative degradation kinetics / E. Esmizadeh, C. Tzoganakis, T. Mekonnen // Polymers. – 2020. – Vol. 12, № 8. – P. 1627. https://doi.org/10.3390/polym12081627.
19. Monitoring antioxidant consumption and build-up in polypropylene during open-loop and closedloop mechanical recycling / N. Knoben et al // Materials. – 2025. – Vol. 18, № 7. – P. 1640. https://doi.org/10.3390/ma18071640.
20. Degradation indicators in multiple recycling processing loops of impact polypropylene and high density polyethylene / L. Douiri et al // Polymer Degradation and Stability. – 2024. – Vol. 219. – P. 110617. https://doi.org/10.1016/j.polymdegradstab.2023.110617.
21. How small molecules affect the thermo-oxidative aging mechanism of polypropylene: A reactive molecular dynamics study / F. Zhang et al // Polymers. – 2021. – Vol. 13, № 8. – P. 1243. https://doi.org/10.3390/polym13081243.
22. Influence of the repeated extrusion on the degradation of polyethylene. Structural changes in low density polyethylene / J. Dostál et al // European Polymer Journal. – 2008. – Vol. 44, № 8. – P. 2652-2658. https://doi.org/10.1016/j.eurpolymj.2008.05.028.
23. Comprehensive investigation into the impact of degradation of recycled polyethylene and recycled polypropylene on the thermo-mechanical characteristics and thermal stability of blends / W. Zhang et al // Molecules. – 2024. – Vol. 29, № 18. – P. 4499. https://doi.org/10.3390/molecules29184499.
24. da Costa H.M. Degradation of polypropylene (PP) during multiple extrusions: Thermal analysis, mechanical properties and analysis of variance / H.M. da Costa, V.D. Ramos, M.G. de Oliveira // Polymer Testing. – 2007. – Vol. 26, № 5. – P. 676-684. https://doi.org/10.1016/j.polymertesting.2007.04.003.
25. Processability and mechanical properties of extensively recycled high density polyethylene / P. Oblak et al // Polymer Degradation and Stability. – 2015. – Vol. 114. – P. 133-145. https://doi.org/10.1016/j.polymdegradstab.2015.01.012.
26. Effect of hindered piperidine light stabilizer molecular structure and UV-absorber addition on the oxidation of HDPE. Part 1: Long-term thermal and photo-oxidation studies / C.M. Liauw et al // Journal of Vinyl and Additive Technology. – 2004. – Vol. 10, № 2. – P. 79-87. https://doi.org/10.1002/vnl.20011.
27. A fundamental study on photo-oxidative degradation of linear low density polyethylene films at embrittlement / Y.C. Hsu et al // Polymer. – 2012. – Vol. 53, № 12. – P. 2385-2393. https://doi.org/10.1016/j.polymer.2012.03.044.
28. Thermo-oxidative degradation of isotactic polypropylene at high temperatures: phenolic antioxidants versus HAS / R. Gensler et al // Polymer Degradation and Stability. – 2000. – Vol. 67, № 2. – P. 195-208. https://doi.org/10.1016/S0141-3910(99)00113-5.
29. Thermo-oxidative stability of PP waste films studied by imaging chemiluminescence / G. Ahlblad et al // Polymer Degradation and Stability. – 2001. – Vol. 73, № 1. – P. 15-22. https://doi.org/10.1016/S0141-3910(01)00038-6.
30. Recycling of metallocene isotactic polypropylene: importance of antioxidants / E. BlázquezBlázquez et al // Journal of Thermal Analysis and Calorimetry. – 2022. – Vol. 147, № 23. – P. 13363-13374. https://doi.org/10.1007/s10973-022-11505-2.
31. Focke W.W. Stabilization of low-density polyethylene films containing metal stearates as photodegradants / W.W. Focke, R.P. Mashele, N.S. Nhlapo // Journal of Vinyl and Additive Technology. – 2011. – Vol. 17, № 1. – P. 21-27. https://doi.org/10.1002/vnl.20248.
32. Degradation and stabilization of polyolefins from municipal plastic waste during multiple extrusions under different reprocessing conditions / A. Santos et al // Polymer Degradation and Stability. – 2002. – Vol. 77, № 3. – P. 441-447. https://doi.org/10.1016/S0141-3910(02)00101-5.
33. Delva L. The Effect of Multiple Extrusions on the Properties of Montmorillonite Filled Polypropylene / L. Delva, K. Ragaert, J. Degrieck, L. Cardon // Polymers. – 2014. – Vol. 6, № 12. – P. 2912-2927. https://doi.org/10.3390/polym6122912.
34. Abbas-Abadi M.S. Effect of the melt flow index and melt flow rate on the thermal degradation kinetics of commercial polyolefins / M.S. Abbas-Abadi, M.N. Haghighi, H. Yeganeh // Journal of Applied Polymer Science. – 2012. – Vol. 126, № 5. – P. 1739-1745. https://doi.org/10.1002/app.36775.
35. Berzin F. Rheological behavior of controlled-rheology polypropylenes obtained by peroxidepromoted degradation during extrusion: Comparison between homopolymer and copolymer / F. Berzin, B. Vergnes, L. Delamare // Journal of Applied Polymer Science. – 2001. – Vol. 80, № 8. – P. 1243-1252. https://doi.org/10.1002/app.1210.
36. Thermo-mechanical degradation of polypropylene (PP) and low-density polyethylene (LDPE) blends exposed to simulated recycling / S. Saikrishnan et al // Polymer Degradation and Stability. – 2020. – Vol. 182. – P. 109390. https://doi.org/10.1016/j.polymdegradstab.2020.109390.
37. Recent developments in recycling of post-consumer polyethylene waste / Y. Ma et al // Green Chemistry. – 2025. – Vol. 27. – P. 4040-4093. https://doi.org/10.1039/d4gc06566b.
38. Ballestar de las Heras R. Comparative analysis of the effects of incorporating post-industrial recycled LLDPE and post-consumer PE in films: Macrostructural and microstructural perspectives in the packaging industry / R. Ballestar de las Heras, X. Colom, J. Cañavate // Polymers. – 2024. – Vol.16, № 7. – P. 916. https://doi.org/10.3390/polym16070916.
39. Characterization of Composition and Structure-Property Relationships of Commercial PostConsumer Polyethylene and Polypropylene Recyclates / M. Gall et al // Polymers. – 2021. – Vol. 13, № 10. – P. 1574. https://doi.org/10.3390/polym13101574.
40. Investigating the effect of accelerated weathering on the mechanical and physical properties of high content plastic solid waste (PSW) blends with virgin linear low density polyethylene (LLDPE) / S. Al-Salem et al // Polymer Testing. – 2015. – Vol. 46. – P. 116-121. https://doi.org/10.1016/j.polymertesting.2015.07.008.
41. Oxidative depolymerization of polyethylene (PE), polypropylene (PP) and polystyrene (PS) wastes to value-added chemicals / H.S. Raby et al // Polymer Degradation and Stability. – 2025. – Vol. 242. – P. 111709. https://doi.org/10.1016/j.polymdegradstab.2025.111709.
42. Enhancement of second life cycle potential of polypropylene exposed to combined thermooxidative aging during an automotive use phase and thermo-mechanical aging in mechanical recycling processing / S. Hoebel et al // Journal of Material Cycles and Waste Management. – 2026. – Vol. 28. – P. 3496–3512. https://doi.org/10.1007/s10163-026-02632-1.
43. Gnoffo C. Mechanical recycling of HDPE-based packaging: Interplay between cross contamination, aging and reprocessing / C. Gnoffo, R. Arrigo, A. Frache // Polymer Degradation and Stability. – 2025. – Vol. 236. – P. 111290. https://doi.org/10.1016/j.polymdegradstab.2025.111290.
44. Jansson A. Degradation of post-consumer polypropylene materials exposed to simulated recycling—mechanical properties / A. Jansson, K. Möller, T. Gevert // Polymer Degradation and Stability. – 2003. – Vol. 82, № 1. – P. 37-46. https://doi.org/10.1016/S0141-3910(03)00160-5.
45. Accurate determination of polyethylene (PE) and polypropylene (PP) content in polyolefin blends using machine learning-assisted differential scanning calorimetry (DSC) analysis / A. Bashirgonbadi et al // Polymer Testing. – 2024. – Vol. 131. – P. 108353. https://doi.org/10.1016/j.polymertesting.2024.108353.
46. Properties of Recycled High Density Polyethylene/Recycled Polypropylene Blends: Effect of Maleic Anhydride Polypropylene / A.M. Atiqah et al // Key Engineering Materials. – 2013. – Vol. 594-595. – P. 837-841. https://doi.org/10.4028/www.scientific.net/KEM.594-595.837.
47. Polypropylene/polyethylene blends as models for high-impact propylene-ethylene copolymers, part 2: Relation between composition and mechanical performance / C. Kock et al // Journal of Applied Polymer Science. – 2013. – Vol. 130, № 1. – P. 287-296. https://doi.org/10.1002/app.39181.
48. Bertin S. Study and characterization of virgin and recycled LDPE/PP blends / S. Bertin, J.J. Robin // European Polymer Journal. – 2002. – Vol. 38, № 11. – P. 2255-2264. https://doi.org/10.1016/S0014-3057(02)00111-8.
49. Recycled and restabilized HDPE bottle crates: Retention of critical properties after heat aging / C.N. Kartalis et al // Polymer Engineering & Science. – 2001. – Vol. 41, № 5. – P. 771-781. https://doi.org/10.1002/pen.10774.
50. Dopico-García M.S. Antioxidant Content of and Migration from Commercial Polyethylene, Polypropylene, and Polyvinyl Chloride Packages / M.S. Dopico-García, J.M. López-Vilariñó, M.V. González-Rodríguez // Journal of Agricultural and Food Chemistry. – 2007. – Vol. 55, № 8. – P. 3225-3231. https://doi.org/10.1021/jf070102+.
51. Characterization of Morphological, Thermal, and Mechanical Performances and UV Ageing Degradation of Post-Consumer Recycled Polypropylene for Automotive Industries / M. Arese et al // Materials. – 2025. – Vol. 18, № 5. – P. 1090. https://doi.org/10.3390/ma18051090.
52. Prior L. Assessment of the Impact of Superficial Contamination and Thermo-Oxidative Degradation on the Properties of Post-Consumer Recycled Polypropylene / L. Prior, M.S.A. Oliveira, T. Zhiltsova // Materials. – 2023. – Vol. 16, № 3. – P. 1198. https://doi.org/10.3390/ma16031198.
53. Jiménez A. Processing and properties of recycled polypropylene modified with elastomers / A. Jiménez, L. Torre, J. Kenny // Plastics, Rubber and Composites. – 2003. – Vol. 32, № 8-9. – P. 357-367. https://doi.org/10.1179/146580103225004126.
54. Towards a Circular Economy: Study of the Mechanical, Thermal, and Electrical Properties of Recycled Polypropylene and Their Composite Materials / T. Jamnongkan et al // Polymers. – 2022. – Vol. 14, № 24. – P. 5482. https://doi.org/10.3390/polym14245482.
Review
For citations:
Andriyenko Y.O., Nesmeyanova R.M., Massakbayeva S.R., Kovtareva S.Yu., Mukashev O.E. MECHANISMS OF POLYOLEFIN (PP AND PE) DEGRADATION AND COMPARATIVE CHARACTERISTICS OF PRIMARY AND SECONDARY POLYOLEFINS. Bulletin of Shakarim University. Technical Sciences. 2026;(3(23)):893-904. https://doi.org/10.53360/2788-7995-2026-3(23)-89
JATS XML















