Preview

Bulletin of Shakarim University. Technical Sciences

Advanced search

Submissions

Online Submissions

Already have a Username/Password for Bulletin of Shakarim University. Technical Sciences?
Go to Login

Need a Username/Password?
Go to Registration

Registration and login are required to submit items online and to check the status of current submissions.

Start submission
 

Author Guidelines

RULES FOR AUTHORS

 

A scientific article should be a textual material of the initial, intermediate or final results of a scientific research, experimental or analytical activity, containing author's developments, conclusions, recommendations that have not been previously published and have novelty. A scientific article also includes a work devoted to the study and analysis of previously published scientific results related to a common theme (review article), which provides generalizing conclusions and recommendations.

In the scientific journal “Bulletin of Shakarim University”. Series of technical sciences” accepts manuscripts in Kazakh, Russian, English.

Periodicity of the journal - 1 time per quarter (4 issues per year).

 

The article is submitted in electronic format (.doc, .docx, .rtf) by downloading through the functionality of the journal website tech.vestnik.shakarim.kz

To work with the portal, you need to register on the site tech.vestnik.shakarim.kz

 

Articles in the following areas are accepted for publication in the journal:

  • Automation and information technology
  • Mechanical engineering and mechanics
  • Food engineering and biotechnology
  • Technical Physics and Thermal power engineering
  • Chemical Technology

Requirements for the formalization of materials

The article is drawn up with the following margins: indent from the edge of the sheet - 2.0 cm. Font size - 11, line spacing - 1.0, typeface - Arial.

 

Structure of a scientific article

  • ISTIR index (international scientific and technical information rubric) – indicated from the left edge of the page. To assign an ISTIR index to an article, you need to use the site www.grnti.ru.
  • Information about the authors and address - written on the next line in the center
  • initials and surname of the author (s) of the article (first write the initials, then the surname – A. Kaliev), font selection – bold;
  • place of work of the author(s) – the name of the university (organization), city, country;
  • contact information (e-mail) of the corresponding author.
  • Title of the article (title) – next line, highlighted in bold, center alignment. It should accurately reflect the content, be short and concise. Shortening of words in the title is not allowed.
  • Annotation - a summary of the main essence of research, methods and objects of research, the most important results, their significance, scientific and practical value. The annotation is placed one line after the title of the article in italics. The volume of the abstract is 150-300 words.
  • Keywords are designed to search for an article and determine its subject area. The number of keywords - 5-8, are written in italics.
  • The main text of the article - through the line:
  • Introduction - a reflection of relevance;
  • Conditions and methods of research;
  • Research results;
  • Discussion of scientific results;
  • Conclusion;
  • The list of references.
  • Funding information (in the presence).
  • At the end of the article, the initials and surname, academic degree, title, place of work of the author(s) are given; the name of the university (organization), city, country; contact information (e-mail) for each author; title (heading) of the article; annotation; keywords in two languages distinct from the language of the article (Kazakh/Russian, English).

The volume of materials, as a rule, should not be less than 3 pages and not more than 8 pages, including text, figures, tables.

The number of authors should not exceed 5 people.

 

Drawings, maps, photographs, tables, formulas are recommended to be done using computer technology and placed in the article as they are mentioned. Sequential numbers of figures are indicated by Arabic numerals, the name of the figure is given in the center under the figure (Figure 1 – The title of the figure).

Tables are reflected in the text of the article after the first link or on the next page. The number and title of the table are given on the left side of the page (Table 1 – The title of the table). If the table is transferred to the next page, the columns are numbered and on the next page, on the right side, the continuation of the table is indicated (Continuation of table 1).

The order of registration of literature:

  • literature is arranged as it is mentioned in the text;
  • the text in square brackets indicates the serial number of the work to which the link is given;
  • the design of the literature should be carried out in accordance with the requirements of GOST 7.1-2003 “Bibliographic record. Bibliographic description. General requirements and rules for drafting”;
  • when preparing referenced literature, provide a complete list of the authors of the publication (without others);
  • The list of literature should contain at least 10 titles; 50% of them are from English-language sources. If the article is presented in Kazakh and Russian, then it is necessary to indicate a transliterated list of references (for transliteration, use the site http://translit-online.ru).

 

Examples of designing a list of references

Article from the periodical:

  1. Aksartov R.M., Aizikov M.I., Rasulova S.A. Method for the quantitative determination of leucomizin // Bulletin of KazNU. Ser. chem. - 2003. - V.1. No. 8. - 40-41 p.

Book:

  1. Kurmukov A.A. Angioprotective and hypolipidemic activity of leuomizin. - Almaty: Bastau, 2007. - 148 p.

Publication from the materials of the conference (seminar, symposium), collections of works:

  1. Abimuldina S.T., Sydykova G.E., Orazbaeva L.A. Functioning and development of the infrastructure of sugar production // Innovation in the agrarian sector of Kazakhstan: Mater. International conf. / KazNU named after al-Farabi - Almaty, 2010. - 10-13 p.

Electronic resource:

  1. Sokolovsky D.V. Theory of synthesis of self-aligning cam mechanisms of drives [Electron. resource]. – 2006. – URL: http://bookchamber.kz/stst_2006.htm (date of access: 12.03.2009).

 

After the submission of the article by the author, the editors of the journal review the submitted work within two weeks in order to check its compliance with the requirements (anti-plagiarism, design, review, etc.).

In case of a positive decision of the editorial board of the journal to accept the article, the authors are sent a corresponding message to pay for the publication.

In case of non-compliance of the article with the requirements of the journal, the authors will be notified by e-mail.

 

The editorial board of the journal independently sends the received work for review. The journal uses double-blind review, that is, it is confidential.

 

The editorial board of the journal checks the article for borrowings (licensed software is used). The originality of the text must be at least 75%. The share of self-citations in articles should not exceed 15%. An article that does not reach the required percentage of originality is sent to the author for revision. The first and second checks are free of charge, the third check is 2000 tenge. If a negative result is obtained after the third check, the article is not allowed for publication in the journal.

 

Sample design of the article

ISTIR: 32.61.11

 

  1. Smagulov1, S. Zaitsev2, M. Iskakova1, A. Karimov3

1Shakarim University of Semey

071412, Republic of Kazakhstan, Semey, 20 A, Glinki str.

2Moscow State University,

119991, Russian Federation, Moscow, Leninskiye Gory, 1, str.

3Kazakh аl-Farabi National University

 050040, Republic of Kazakhstan, Almaty, al-Farabi Ave., 71

*e-mail: smagulov@mail.ru

 

BIOGEOCHEMICAL MIGRATION AND ACCUMULATION HEAVY METALS

 

Annotation: The article presents the results of the study….…

Key words: environment, biologist, nature,…......

 

Introduction

Atmospheric, water, and biogenic migration plays an important role in the formation of the biogeochemical properties of landscape components. Of all natural waters, the most noticeable changes are observed in precipitation. The concentration of elements in the snow depends on the air temperature, the direction of the wind rose in relation to the source of pollution, the distance from it, and the terrain [1]. Differences in the chemical composition of precipitation are due to complex movements of air masses. Figure 1 shows the content of heavy metals in the ice of reservoirs.

Figure 1 – Distribution of heavy metals in the ice of reservoirs of the Moskvoretskaya system

 

Research methods

Text……

 

Research results

Rain waters are sulfate-bicarbonate- and sulfate-chloride-calcium in composition. Their mineralization is higher due to the concentration of dust in the atmosphere. The predominance of heavy metals calculated for precipitation per unit area of the landscape was revealed in rain (Sr, Pb, Cr, Zn, Ni) compared to snow (Table 1).

 

Table 1 – Content of heavy metals in snow and rain, kg/ha

Heavy Metals

Snow

Rain

1

Pb

0,5х10-6

0,2х10-4

2

Cr

0,4х10-6

1,6х10-3

3

V

8,5х10-5

Note: *

 

Discussion of scientific results

Text……

 

Conclusion

Text……

 

References

  1. Kurmukov A.A. Angioprotektornaya i gipolipidemicheskaya aktivnost' leuomizina. – Almaty: Bastau, 2007. – 148 s.
  2. Hrustaleva M.A. Biogeohimicheskaya migraciya i akkumulyaciya tyazhelyh metallov v komponentah prirodnyh i antropogennyh landshaftov // Sbornik nauchnyh trudov 3-j Mezhdunarodnoj nauchnoj konferencii: Tom 1. – g. Semey: Izd-vo SGU im. SHakarima, 2012. – S. 368-373.

 

М.А. Смагулов1*, С.А. Зайцев2, М.М. Искакова1, А.К. Каримов3

1Семей қаласының Шәкәрім атындағы университеті,

071412, Қазақстан Республикасы, Семей қ., Глинки к-сі, 20 А

2Мәскеу мемлекеттік университеті,

119991, Ресей Федерациясы, Мәскеу, Ленин таулары, 1-үй

3Әл-Фараби атындағы Қазақ ұлттық университеті,

050040, Қазақстан Республикасы, Алматы қ., әл-Фараби даңғылы, 71

*e-mail: smagulov@mail.ru

 

АУЫР МЕТАЛДАРДЫҢ БИОГЕОХИМИЯЛЫҚ МИГРАЦИЯСЫ ЖӘНЕ ЖИНАҚТАЛУЫ

 

Бұл мақалада биосферадағы экологиялық-геохимиялық өзгерістердің даму сипаттамасы қаралады. Қоршаған геохимиялық және экологиялық-геохимиялық өзгерістердің әсерлері бөлек және жекеше талданды. Біз биосферадағы экологиялық-геохимиялық өзгерістердің дамуының заңдылығын ұсынамыз. ......

Түйін сөздер:.....

 

 М.А. Смагулов1*, С.А. Зайцев2, М.М. Искакова1, А.К. Каримов3

1Университет имени Шакарима города Семей,

071412, Республика Казахстан, г. Семей, ул. Глинки, 20 А

2Московский государственный университет,

119991, Российская Федерация, Москва, Ленинские горы, д. 1

3Казахский национальный университет имени аль-Фараби,

050040, Республика Казахстан, г. Алматы, пр. аль-Фараби, 71

*e-mail: smagulov@mail.ru

 

БИОГЕОХИМИЧЕСКАЯ МИГРАЦИЯ И АККУМУЛЯЦИЯ ТЯЖЕЛЫХ МЕТАЛЛОВ

 

Аннотация: В статье приведены результаты исследования….…

Ключевые слова: среда, биолог, природа,…......

 

Information about the authors

Maksat Smagulov* – doctor of technical sciences, professor of the department «Technological equipment and mechanical engineering»; Shakarim University of Semey, Republic of Kazakhstan; e-mail: smagulov@mail.ru. ORCID: https://orcid.org/0000-0001-6369-3690.

Sergei Zaitsev – Candidate of Physical and Mathematical Sciences, Department of Physics and Mathematics; Moscow State University, Russian Federation; e-mail: zaisev@mail.ru. ORCID: https://orcid.org/0000-0001-7057-0461.

Marjan Iskakova – doctoral student of the department «Technological equipment and mechanical engineering»; Shakarim University of Semey, Republic of Kazakhstan; e-mail: iskakova@mail.ru. ORCID: https://orcid.org/0000-0002-4787-4966

Aitbek Karimov – senior teacher at the Department of Automation; Al-Farabi Kazakh National University, Republic of Kazakhstan; e-mail: karimov@mail.ru. ORCID: https://orcid.org/0000-0002-5378-2266

Сведения об авторах

Максат Ануарбекович Смагулов* – доктор технических наук, профессор кафедры «Технологическое оборудование и машиностроение»; Университет имени Шакарима города Семей, Республика Казахстан; е-mail: smagulov@mail.ru. ORCID: https://orcid.org/0000-0001-6369-3690.

Сергей Александрович Зайцев – кандидат физико-математических наук кафедры «Физика и математика»; Московский государственный университет, Российская Федерация; е-mail: zaisev@mail.ru. ORCID: https://orcid.org/0000-0001-7057-0461.

Маржан Муратовна Искакова – докторант кафедры «Технологическое оборудование и машиностроение»; Университет имени Шакарима города Семей, Республика Казахстан; е-mail: iskakova@mail.ru. ORCID: https://orcid.org/0000-0002-4787-4966.

Айтбек Калиевич Каримов – старший преподаватель кафедры «Автоматизация»; Казахский национальный университет имени аль-Фараби, Республика Казахстан; е-mail: karimov@mail.ru. ORCID: https://orcid.org/0000-0002-5378-2266.

 

Авторлар туралы мәліметтер

Максат Ануарбекович Смагулов* – техника ғылымдарының докторы, «Технологиялық жабдықтар және машина жасау» кафедрасының профессоры; Семей қаласының Шәкәрім атындағы университеті, Қазақстан; е-mail: smagulov@mail.ru. ORCID: https://orcid.org/0000-0001-6369-3690.

Сергей Александрович Зайцев «Физика және математика» кафедрасының физика-математика ғылымдарының кандидаты; Мәскеу мемлекеттік университеті, Ресей Федерациясы; е-mail: zaisev@mail.ru. ORCID: https://orcid.org/0000-0001-7057-0461.

Маржан Муратовна Искакова – «Технологиялық жабдықтар және машина жасау» кафедрасының докторанты; Семей қаласының Шәкәрім атындағы университеті, Қазақстан; е-mail: iskakova@mail.ru. ORCID: https://orcid.org/0000-0002-4787-4966.

Айтбек Калиевич Каримов – «Автоматтандыру» кафедрасының аға оқытушысы; әл-Фараби атындағы Қазақ ұлттық университеті, Қазақстан; е-mail: karimov@mail.ru. ORCID: https://orcid.org/0000-0002-5378-2266

 

Submission Preparation Checklist

As part of the submission process, authors are required to check off their submission's compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines.

  1. The manuscripts are accepted if has not been published or submitted for publication elsewhere.

  2. The materials should be prepared in a format OpenOffice, Microsoft Word, RTF, or World Perfect.

  3. Internet links are provided as a complete URL. 

  4. Text should be typed with an interval of one and a half line spacing, font Times New Roman, 14 pt; to highlight the accents it is recommended to use italics rather than underlining (except Internet links). All images, graphics and tables are placed within the text according to the meaning of the particular part of text  (and not at the end of the document).

  5. Text should follow the stylistic and bibliography requirements as stated in  Regulations  located in the Part "About Us." 

  6. Please, remove the authors' names from the title of the article and other parts of the document to ensure the  anonymity of reviewing.

 

Copyright Notice

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

 

Privacy Statement

Specified when registering the names and addresses will be used solely for technical purposes of a contact with the Author or reviewers (editors) when preparing the article for publication. Private data will not be shared with other individuals and organizations.