4-санға «Автоматтандыру және ақпараттық технологиялар», «Азық-түлік инженериясы және биотехнология», сондай-ақ «Химиялық технология» бағыттары бойынша мақалалар қабылдау жабылды.

Приём статей в четвёртый номер по направлениям «Автоматизация и информационные технологии», «Пищевая инженерия и биотехнология», а также «Химическая технология» закрыт.

Submissions for the fourth issue in the fields of Automation and Information Technology, Food Engineering and Biotechnology, as well as Chemical Technology, are now closed.

Preview

Bulletin of Shakarim University. Technical Sciences

Bulletin of Shakarim University. Technical Sciences

Advanced search

COMPARATIVE EFFECT OF TIO2 AND Al2O3 NANOPARTICLES ON THE THERMAL CONDUCTIVITY AND KINEMATIC VISCOSITY OF SUNFLOWER OIL

https://doi.org/10.53360/2788-7995-2026-3(23)-75

Abstract

Improving heat dissipation efficiency while maintaining acceptable rheological characteristics is one of the main requirements for vegetable oil-based nanofluids. In the present study, a comparative investigation of the effects of TiO2 and Al2O3 nanoparticles on the thermal conductivity and kinematic viscosity of sunflower oil was carried out. Nanoparticle mass concentrations of 4 and 8 wt.% were considered within a temperature range of 293-323 K. It was established that the addition of both types of nanoparticles increased the thermal conductivity of the base fluid, with TiO2 providing a more pronounced effect. For 4 wt.% TiO2, the relative increase in thermal conductivity was 8.2-8.5%, whereas for Al2O3 at the same concentration it was 6.1-6.4%. At a concentration of 8 wt.%, the corresponding increases were 14.0-14.3% and 12.0-12.4%, respectively. At the same time, the addition of nanoparticles was accompanied by an increase in kinematic viscosity. The most significant increase was observed for 8 wt.% Al2O3 and amounted to 95-97%, whereas for 8 wt.% TiO2 it was within the range of 64-65%. The obtained results show that, under the investigated conditions, TiO2 provides a more favorable combination of thermal conductivity enhancement and viscosity characteristics compared with Al2O3. The observed difference was considered in terms of interfacial layer formation, nanoparticle mobility, and the characteristics of nanoparticle aggregation in the oil medium.

About the Authors

A. A. Bektemissov
Shakarim University
Kazakhstan

Anuar Almasbekovich Bektemissov – researcher, Department of Technical Physics and Heat Power Engineering

20A Glinka St., Semey, 071412, Republic of Kazakhstan



M. V. Ermolenko
Shakarim University
Kazakhstan

Mikhail Vyacheslavovich Yermolenko – Candidate of Technical Sciences, Associate Professor, Senior Lecturer at the Department of «Technical Physics and Heat Power  Engineering»

20A Glinka St., Semey, 071412, Republic of Kazakhstan



References

1. Temperature dependence of density and viscosity of vegetable oils / Esteban B. et al // Biomass and Bioenergy. – 2012. – Vol. 42. – P. 164-171. https://doi.org/10.1016/j.biombioe.2012.03.007.

2. Okafor A.C. А study of viscosity and thermal conductivity of vegetable oils as base cutting fluids for minimum quantity lubrication machining of difficult-to-cut metals / A.C. Okafor, T.O. Nwoguh // The International Journal of Advanced Manufacturing Technology. – 2020. – Vol. 106. – P. 1121-1131. https://doi.org/10.1007/s00170-019-04611-3.

3. Nwoguh T.O. Enhancement of viscosity and thermal conductivity of soybean vegetable oil using nanoparticles to form nanofluids for minimum quantity lubrication machining of difficult-to-cut metals / T.O. Nwoguh et al // The International Journal of Advanced Manufacturing Technology. – 2021. – Vol. 113. – P. 3377-3388. https://doi.org/10.1007/s00170-021-06812-1.

4. Wanatasanappan V.V. Thermophysical Properties of Vegetable Oil-Based Hybrid Nanofluids Containing Al₂O₃–TiO₂ Nanoparticles as Insulation Oil for Power Transformers / V.V. Wanatasanappan, M. Rezman, M.Z. Abdullah // Nanomaterials. – 2022. – Vol. 12, № 20, Art. 3621. https://doi.org/10.3390/nano12203621.

5. Thermal Performance and Viscosity of Biologically Produced Silver/Coconut Oil Nanofluids / M.M. Sarafraz et al // Chemical and Biochemical Engineering Quarterly. – 2016. – Vol. 30, № 4. – P. 489-500. https://doi.org/10.15255/CABEQ.2015.2203.

6. Jyothish P. Experimental investigation study on enhancing the thermal and rheological properties of sunflower vegetable oil with ZnTiO₃, BN, CuO nanofluid for machining of Inconel-718 under minimum quantity lubrication (MQL) / P. Jyothish, V. Vasu, D. Kashinath // Materials Today: Proceedings. – 2022. – Vol. 59. – P. 1599-1607. https://doi.org/10.1016/j.matpr.2022.03.147.

7. Tiwari S. Synthesis, characterization, and application of Al₂O₃/coconut oil-based nanofluids in sustainable machining of AISI 1040 steel / S. Tiwari, M. Amarnath, M.K. Gupta // Journal of Molecular Liquids. – 2023. – Vol. 386, Art. 122465. https://doi.org/10.1016/j.molliq.2023.122465.

8. Experimental studies on the viscosity of TiO₂ and Al₂O₃ nanoparticles suspended in a mixture of ethylene glycol and water for high temperature applications / T. Yiamsawas et al // Applied Energy. – 2013. – Vol. 111. – P. 40-45. https://doi.org/10.1016/j.apenergy.2013.04.068.

9. Thermal Conductivity Characterization of High Oleic Vegetable Oils Based Hybrid Nanofluids Formulated Using GnP, TiO₂, MoS₂, Al₂O₃ Nanoparticles for MQL Machining / A.C. Okafor et al // International Journal of Thermophysics. – 2024. – Vol. 45, Art. 169. https://doi.org/10.1007/s10765-024-03472-7.

10. Thermal conductivity and viscosity characterization of soybean oil nanofluids dispersed with graphene nanoplatelets, MoS₂, TiO₂ and Al₂O₃ nanoparticles for MQL machining / A.C. Okafor et al // Discover Nano. – 2026. – Vol. 21, Art. 303. https://doi.org/10.1186/s11671-026-04754-9.


Review

For citations:


Bektemissov A.A., Ermolenko M.V. COMPARATIVE EFFECT OF TIO2 AND Al2O3 NANOPARTICLES ON THE THERMAL CONDUCTIVITY AND KINEMATIC VISCOSITY OF SUNFLOWER OIL. Bulletin of Shakarim University. Technical Sciences. 2026;(3(23)):748-754. (In Russ.) https://doi.org/10.53360/2788-7995-2026-3(23)-75

Views: 14

JATS XML


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 2788-7995 (Print)
ISSN 3006-0524 (Online)
X