4-санға «Автоматтандыру және ақпараттық технологиялар», «Азық-түлік инженериясы және биотехнология», сондай-ақ «Химиялық технология» бағыттары бойынша мақалалар қабылдау жабылды.

Приём статей в четвёртый номер по направлениям «Автоматизация и информационные технологии», «Пищевая инженерия и биотехнология», а также «Химическая технология» закрыт.

Submissions for the fourth issue in the fields of Automation and Information Technology, Food Engineering and Biotechnology, as well as Chemical Technology, are now closed.

Preview

Bulletin of Shakarim University. Technical Sciences

Bulletin of Shakarim University. Technical Sciences

Advanced search

HOLOGRAPHIC INVESTIGATION OF THERMAL STABILITY OF COATINGS FROM NATURAL MATERIALS PRODUCED BY THE DETONATION METHOD

https://doi.org/10.53360/2788-7995-2026-3(23)-73

Abstract

The limiting heat loads for a cooling system with natural material coatings were studied as a function of oxidizer excess ratio, thermal tool characteristics, and material properties. The study is applicable to materials operating with and without surface melting (tuff, marble). The thermal tool and powder deposition conditions were selected, and a displacement-type fuel supply scheme with corresponding experimental conditions was developed. Coating deformation and failure processes were analyzed by holography. The detonation jet flame structure was recorded; the oxidizer excess coefficient at the obstacle was below unity, causing fuel afterburning and up to 6-fold intensification of particle deposition. Specific heat fluxes at the coating surface reached (5÷12) MW/m² along the jet axis at 4×10⁻² m from the nozzle exit. Protective screens against hightemperature detonation jets were developed to prevent coating failure. Equal-deformation interference fringes revealed differing deflections for tuff and marble coatings. Failure was demonstrated in a coating where a cavity of 2.5×10⁻³ m formed within 2.2 s at a limiting heat flux of 1.2×10⁶ W/m². Holographic studies simulate the potential coating degradation process and enable service life prediction.

About the Authors

A. A. Genbach
Almaty University of Power Engineering and Telecommunications n.a. G. Daukeev
Kazakhstan

Alexander Genbach – d.t.s., prof. dep. «Thermal Power and Physics»

050013, Republic of Kazakhstan, Almaty, Baitursynov str., 126/1


Competing Interests:

Авторы заявляют об отсутствии конфликта интересов



D. Yu. Bondartsev
Almaty University of Power Engineering and Telecommunications n.a. G. Daukeev
Kazakhstan

David Bondartsev – PhD, prof. dep. «Thermal Power and Physics»

050013, Republic of Kazakhstan, Almaty, Baitursynov str., 126/1


Competing Interests:

Авторы заявляют об отсутствии конфликта интересов



M. D. Yerbolatov
Almaty University of Power Engineering and Telecommunications n.a. G. Daukeev
Kazakhstan

Maulen Duissenbekuly Yerbolatov – PhD student dep. «Thermal Power and Physics»

050013, Republic of Kazakhstan, Almaty, Baitursynov str., 126/1


Competing Interests:

Авторы заявляют об отсутствии конфликта интересов



References

1. Experimental studies of natural material-based coatings for thermal protection of metallic surfaces / А.А. Genbach et al // Journal of Materials Science: Materials in Engineering. – 2025. – Vol. 20. – P. 46. https://doi.org/10.1186/s40712-025-00252-5.

2. Boiling crisis in porous structures / А.А. Genbach et al // Energy. – 2022. – Vol. 259. – P. 125076. https://doi.org/10.1016/j.energy.2022.125076.

3. Genbach А.А. Limiting thermal state of capillary-porous power-plant components / А.А. Genbach, D.Y. Bondartsev // Russian Engineering Research. – 2020. – Vol. 40. – Р. 384-389. https://doi.org/10.3103/S1068798X20050093.

4. Polyaev V.M. Boiling of a liquid on surfaces with porous coatings / V.M. Polyaev, B.V. Kichatov // Journal of Engineering Physics and Thermophysics. – 2000. – Vol. 73. – Р. 253-258. https://doi.org/10.1007/BF02681726.

5. Zhang J.X. Thermomechanical fatigue mechanism in a modern single crystal nickel base superalloy TMS-82 / J.X. Zhang, H. Harada, Y. Ro // Acta Materialia. – 2008. – Vol. 56. – Р. 2975-2987. https://doi.org/10.1016/j.actamat.2008.02.035.

6. Shajari Y. Investigation on mechanical properties of nickel open cell metal foam after heat treatment / Y. Shajari, L. Nikzad, M. Razavi // Scientific Reports. – 2023. – Vol. 13. – P. 16569. https://doi.org/10.1038/s41598-023-42857-w.

7. Sharifzadeh A.M. Experimental investigation of pool boiling heat transfer enhancement using electrodeposited open-cell metal foam / A.M. Sharifzadeh, H. Moghadasi, H. Saffari // International Journal of Thermal Sciences. – 2022. – Vol. 176. – P. 107536. https://doi.org/10.1016/j.ijthermalsci.2022.107536.

8. Liu B. Advances on strategies for searching for next generation thermal barrier coating materials / B. Liu, Y. Liu, C. Zhu // Journal of Materials Science & Technology. – 2019. – Vol. 35. – Р. 833-851. https://doi.org/10.1016/j.jmst.2018.11.016.

9. Esmaeilkhanian A.H. Thermal barrier coating with improved durability: An overview of doped, nanostructured, multilayered, and gradient-structured zirconia-based thermal barrier coatings / A.H. Esmaeilkhanian // Materials Today Communications. – 2023. – Vol. 37. – P. 107514. https://doi.org/10.1016/j.mtcomm.2023.107514.

10. Rajendran R. Gas turbine coatings – An overview / R. Rajendran // Engineering Failure Analysis. – 2012. – Vol. 26. – Р. 355-369. https://doi.org/10.1016/j.engfailanal.2012.07.007.

11. Clarke D.R. Thermal barrier coating materials / D.R. Clarke, S.R. Phillpot // Materials Today. – 2005. – Vol. 8. – Р. 22-29. https://doi.org/10.1016/S1369-7021(05)70934-2.

12. Vaßen R. A Perspective on Thermally Sprayed Thermal Barrier Coatings: Current Status and Trends / R. Vaßen, E. Bakan, D.E. Mack // Journal of Thermal Spray Technology. – 2022. – Vol. 31. – Р. 685-698. https://doi.org/10.1007/s11666-022-01330-2.


Review

For citations:


Genbach A.A., Bondartsev D.Yu., Yerbolatov M.D. HOLOGRAPHIC INVESTIGATION OF THERMAL STABILITY OF COATINGS FROM NATURAL MATERIALS PRODUCED BY THE DETONATION METHOD. Bulletin of Shakarim University. Technical Sciences. 2026;(3(23)):732-741. (In Russ.) https://doi.org/10.53360/2788-7995-2026-3(23)-73

Views: 15

JATS XML


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 2788-7995 (Print)
ISSN 3006-0524 (Online)
X