INFLUENCE OF MICRO-ARC OXIDATION PROCESSING PARAMETERS ON THE STRUCTURE AND PROPERTIES OF ALUMINOSILICATE COATINGS FORMED ON AMG6 ALUMINUM ALLOY
https://doi.org/10.53360/2788-7995-2026-3(23)-64
Abstract
The work presents a comprehensive study of the formation processes, structure, phase composition, and performance properties of oxide coatings produced on the AMG6 aluminum alloy by the micro-arc oxidation method. The treatment was carried out using a laboratory setup equipped with a pulsed power supply and a temperature control system, ensuring stable electrical and thermal regimes. The use of silicate-alkaline electrolytes of various compositions made it possible to purposefully control the morphology and properties of the coatings. Scanning electron microscopy and energy-dispersive analysis revealed the formation of multilayer oxide coatings with a dense inner barrier layer and a well-developed porous outer layer. The coating thickness ranged from 27-33 μm. X-ray diffraction analysis confirmed the formation of crystalline modifications of aluminum oxide and the aluminosilicate phase mullite under energy-intensive processing conditions. Tribological tests demonstrated that the different MAO regimes provide distinct functional advantages. The Al-3 coating exhibited the lowest coefficient of friction (0.45-0.50), whereas the Al-1 coating showed the smallest wear area. Electrochemical measurements further demonstrated that Al-1 exhibited the highest corrosion resistance, characterized by the lowest corrosion current density among the investigated coatings. These results indicate that the optimal MAO regime should be selected according to the specific tribological and corrosion requirements of the intended application.
Keywords
About the Authors
L. G. SulyubayevaKazakhstan
Laila Gylimmeddenovna Sulyubayeva – PhD, associate professor, Senior Researcher
070002, Kazakhstan, Ust-Kamenogorsk, Shakarima 148
D. R. Baizhan
Kazakhstan
Daryn Rashituly Baizhan – senior Researcher; doctoral
student
070002, Kazakhstan, Ust-Kamenogorsk, Shakarima 148
071412, Republic of Kazakhstan, Semey, 20 A Glinka Street
N. E. Berdimuratov
Kazakhstan
Nurbol Erboluly Berdimuratov – junior researcher
070002, Kazakhstan, Ust-Kamenogorsk, Shakarima 148
B. A. Alibekova
Kazakhstan
Balym Alibekovna Alibekova – engineer
070002, Kazakhstan, Ust-Kamenogorsk, Shakarima 148
References
1. Suminov I.V. Plasma-electrolytic modification of metal and alloy surfaces. Vol. 2 / I.V. Suminov et al. – Moscow: Technosphere, 2011.
2. Analysis on corrosion of aluminum-based micro-arc oxidation coating / Y. Yang et al // AntiCorrosion Methods and Materials. – 2021. – Vol. 68, № 5. – P. 305-314.
3. Ovchinnikov B.B. Anodic micro-arc oxidation of aluminum pistons: features of thermal protective coating deposition technology / B.B. Ovchinnikov, V.Ya. Zelinskii // Liteinoe Proizvodstvo. – 2004. – Vol. 1, № 29. – P. 112-116.
4. Effect of high-temperature oxidation prefab film on formation of micro-arc oxidation coatings on 6061 aluminum alloy / D. Shen et al // Applied Surface Science. – 2013. – Vol. 265. – P. 431-437.
5. Dong Y. The research progress on micro-arc oxidation of aluminum alloy / Y. Dong, Z. Liu, G. Ma // IOP Conference Series: Materials Science and Engineering. – 2020. – Vol. 729, № 1. – Art. 012055.
6. Study of optical characteristics of microdischarges in the micro-arc oxidation process / E.A. Pecherskaya et al // Vacuum. – 2024. – Vol. 229. – Art. 113558.
7. Research on micro-arc oxidation method based on passivation layer on non-valve metal lowcarbon steel surface / S. Sun et al // Tribology International. – 2024. – Vol. 200. – Art. 110114.
8. Electrophysical model of the micro-arc oxidation process / P.E. Golubkov et al // Russian Physics Journal. – 2020. – Vol. 62, № 11. – P. 2137-2144.
9. Malyshev V.N. Modification of friction knots work surfaces on the basis of microarc oxidation method / V.N. Malyshev // International Journal of Scientific Research in Science, Engineering and Technology. – 2016. – Vol. 2, № 4. – P. 464-480.
10. Micro-arc oxidation of aluminum alloys: mechanism, defects, and corrosion resistance / X. Liu et al // Advanced Engineering Materials. – 2025. – Vol. 27, № 10. – Art. 2402748.
11. High-quality oxide layers on Al alloy by micro-arc oxidation using hybrid voltages / Q.-P. Tran et al // Surface and Coatings Technology. – 2016. – Vol. 303. – P. 61-67.
12. Influence of TiO₂ nanoparticle concentration on micro-arc oxidized calcium–phosphate coatings: corrosion resistance and biological response / A. Zhassulan et al // Coatings. – 2025. – Vol. 15, № 10. – Art. 1142.
Supplementary files
|
1. Неозаглавлен | |
| Subject | ||
| Type | Other | |
Download
(1013KB)
|
Indexing metadata ▾ | |
Review
For citations:
Sulyubayeva L.G., Baizhan D.R., Berdimuratov N.E., Alibekova B.A. INFLUENCE OF MICRO-ARC OXIDATION PROCESSING PARAMETERS ON THE STRUCTURE AND PROPERTIES OF ALUMINOSILICATE COATINGS FORMED ON AMG6 ALUMINUM ALLOY. Bulletin of Shakarim University. Technical Sciences. 2026;(3(23)):633-643. https://doi.org/10.53360/2788-7995-2026-3(23)-64
JATS XML















