«Тағам инженериясы және биотехнология», «Химиялық технология», "Техникалық физика және Жылу энергетикасы" және «Автоматтандыру және ақпараттық технологиялар» бағыттары бойынша үшінші нөмірге жарияланымдар қабылдау жабылды!

Прием публикаций на третий номер по направлениям «Пищевая инженерия и биотехнология», «Химическая технология», «Техническая физика и теплоэнергетика» и «Автоматизация и информационные технологии» закрыт!

Submissions for the third issue in the fields of “Food Engineering and Biotechnology”, “Chemical Technology”, "Technical physics and thermal power engineering" and “Automation and Information Technologies” are closed!

Preview

Bulletin of Shakarim University. Technical Sciences

Advanced search

DEVELOPMENT OF A POLYCOMPONENT FAT EMULSION AND STUDY OF ITS PHYSICOCHEMICAL PROPERTIES

https://doi.org/10.53360/2788-7995-2026-2(22)-29

Abstract

This article focuses on the development of a polycomponent fat emulsion and the investigation of its physicochemical properties. The emulsion exhibited a moderately acidic pH of 5.64 ± 0.12, indicating suitability for food applications and consistent structural stability. The structured lipid matrix, formed by rice bran wax and stabilized with chickpea flour, maintained emulsion integrity during storage at 4 °C. Water activity (aw) was measured at 0.947, reflecting a relatively high level of free moisture typical of oil-in-water food emulsions, emphasizing the need for proper storage conditions to ensure microbiological stability. Rheological analysis revealed shear-thinning behavior, with apparent viscosity decreasing from 83.43 to 29.60 mPa·s as rotational speed increased, demonstrating progressive disruption of internal interactions under stress. Color and oil binding capacity measurements confirmed a visually uniform and stable system. Overall, the emulsion combines improved lipid composition with desirable technological properties and has potential as a structured fat system or partial animal fat replacer in various food products. Further studies will investigate the possibility of using this emulsion as a partial animal fat replacer in cooked sausage products.

About the Authors

A. K. Igenbayev
Kazakh Agrotechnical Research University named after S. Seifullin
Kazakhstan

Aidyn Igenbayev – PhD, аssociate professor of the Institute of Engineering and Food Technology,

010000, Astana, Zhenis Avenue, 62



Sh. Zh. Zhaskairat
Kazakh Agrotechnical Research University named after S. Seifullin
Kazakhstan

Shynaray Zhaskairat – doctoral student of the Institute of Engineering and Food Technology,

010000, Astana, Zhenis Avenue, 62



M.R.I. Firty
Universiti Putra Malaysia; Halal Products Research Institute, Universiti Putra Malaysia
Malaysia

Mohammad Rashedi Ismail Fitry – Senior lector of Department of Food Technology, Faculty of Food Science and Technology, 

43400 UPM Serdang, Selangor



A. K. Mustafaeva
Kazakh Agrotechnical Research University named after S. Seifullin
Kazakhstan

Ayaulym Mustafayeva – Candidate of Technical Sciences, Senior lecturer of the Department «Technology of Food and Processing Industries»,

 010000, Astana, Zhenis Avenue, 62



A. K. Zhumagalieva
Kazakh Agrotechnical Research University named after S. Seifullin
Kazakhstan

Ainazhan Zhumagaliyeva – teacher of the Institute of Engineering and Food Technology,

010000, Astana, Zhenis Avenue, 62



References

1. The role of plant oils/lipids as innovative fat replacers in various food products: A review / Kok Jia-Wei et al // Applied Food Research. – 2025. – Vol. 5, Issue 1. https://doi.org/10.1016/j.afres.2025.101010.

2. Dragoev S.G. Lipid peroxidation in muscle foods: Impact on quality, safety and human health / S.G. Dragoev // Foods. – 2024. – V. 13, № 5. – P. 797. https://doi.org/10.3390/foods13050797.

3. Edible plant oil: Global status, health issues, and perspectives / Y. Zhou et al // Frontiers in Plant Science. – 2020. – № 11. – Р. 1315. https://doi.org/10.3389/fpls.2020.01315.

4. Incorporation of different physical forms of fat replacers in the production of low-fat/reduced-fat meat products: Which is more practical? / A.B. Asyrul-Izhar et al // Food Reviews International. – 2023. – № 39(9). – Р. 6387-6419. https://doi.org/10.1080/87559129.2022.2108439.

5. Wallis J.G. Molecular approaches reduce saturates and eliminate trans fats in food oils / J.G. Wallis, J.D. Bengtsson, J. Browse // Frontiers in Plant Science. – 2022. – № 13, Article 908608. https://doi.org/10.3389/fpls.2022.908608.

6. Potential Use of Nonanimal-Based Biopolymers as Gelling/Emulsifying Stabilizing Agents to Reduce the Fat Content in Foods: A Review / Mahsa Rezaee, Mohammed Aider // ACS Food Science & Technology. – 2022. – № 2(5). – Р. 751-762. https://doi.org/10.1021/acsfoodscitech.2c00031.

7. Chaves K.F. Potential application of lipid organogels for food industry / K.F. Chaves, D. BarreraArellano, A.P.B. Ribeiro, // Food Res. Int. – 2018. – № 105. – Р. 863-872. https://doi.org/10.1016/j.foodres.2017.12.020.

8. Review on fat replacement using protein-based microparticulated powders or microgels: A textural perspective / В. Kew et al // Trends Food Sci. Technol. – 2020. – № 106. – Р. 457-468. https://doi.org/10.1016/j.tifs.2020.10.032.

9. Matthaus B. Fatty acid composition and tocopherol profiles of safflower (Carthamus tinctorius L.) seed oils / B. Matthaus, M.M. Özcan, F.Y. Al Juhaimi // Natural Product Research. – 2015. – № 29(2). – Р. 193-196. https://doi.org/10.1080/14786419.2014.971316.

10. Fatty Acid Content and Composition of the Yakutian Horses and Their Main Food Source: Living in Extreme Winter Conditions / K.A. Petrov et al // Biomolecules. – 2020. – № 10. – Р. 315. https://doi.org/10.3390/biom10020315.

11. Fatty acid composition and genome-wide associations of a chickpea (Cicer arietinum L.) diversity panel for biofortification efforts / S. Salaria et al // Sci Rep. – 2023. – № 13. – Р. 14002. https://doi.org/10.1038/s41598-023-41274-3.

12. Effect of Vegetable Oil Unsaturation and Minor Polar Components on the Physical Properties of Rice Bran Wax Oleogels / H.S. Hwang et al // Journal of Food Science. – 2025. – Vol. 90, № 1. – Р. e17613. https://doi.org/10.1111/1750-3841.17613.

13. “Food Grade Oleogels: Trends in Analysis, Characterization, and Applicability / S. Perța Crișan et al // Gels. – 2023. – Vol. 9, № 5. – Р. 386. https://doi.org/10.3390/gels9050386.

14. Physicochemical Properties and Cookie Making Performance as Fat Replacer of Wax Based Rice Bran Oil Oleogels / M. Pang et al // Gels. – 2022. – Vol. 9, № 1. – Р. 13. https://doi.org/10.3390/gels9010013.

15. Effects on the Physical Properties of Corn Oil Oleogels Structured with Different Ratios of Rice Bran or Carnauba Waxes / J. Jones et al // Journal of the American Oil Chemists Society. – 2022. – № 99. – Р. 75.

16. Zhang H. Effect of pH on stability of oil-in-water emulsions stabilized by pectin–zein complexes / H. Zhang, Y. Wang, X. Li // Advanced Materials Research. – 2013. – Vol. 747. – P. 127-130. https://doi.org/10.4028/www.scientific.net/AMR.747.127.

17. Chanamai R. Prediction of emulsion color from droplet characteristics: dilute monodisperse oilin-water emulsions / R. Chanamai, D.J. McClements // Food Hydrocolloids. – 2001. – Vol. 15, Issue 1. – P. 83-91. https://doi.org/10.1016/S0268-005X(00)00055-2.

18. Structure and rheology of oleogels made from rice bran wax and rice bran oil / Khakhanang Wijarnprecha et al // Food Research International. – 2018. – Т. 112. – H. 199-208. https://doi.org/10.1016/j.foodres.2018.06.005.

19. Cimander C. Water activity and chemical composition of some food emulsions / C. Cimander, N.-G. Carlsson, H. Lingnert // Food Chemistry. – 1992. – Vol. 45, № 2. – P. 91-93. https://doi.org/10.1016/0308-8146(92)90015-T.


Review

For citations:


Igenbayev A.K., Zhaskairat Sh.Zh., Firty M., Mustafaeva A.K., Zhumagalieva A.K. DEVELOPMENT OF A POLYCOMPONENT FAT EMULSION AND STUDY OF ITS PHYSICOCHEMICAL PROPERTIES. Bulletin of Shakarim University. Technical Sciences. 2026;(2(22)):273-281. https://doi.org/10.53360/2788-7995-2026-2(22)-29

Views: 4

JATS XML


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 2788-7995 (Print)
ISSN 3006-0524 (Online)
X