DEVELOPMENT OF A METHOD FOR CALCULATING THE VAPOR-GAS ENVELOPE THICKNESS AND STUDYING THE INFLUENCE OF CATHODIC HEATING PROCESS ENERGY CHARACTERISTICS ON THE VAPOR-GAS ENVELOPE THICKNESS

A method for calculating the thickness of the vapor-gas envelope formed around the cathode during electrolytic-plasma heating has been developed, taking into account the energy characteristics of the process. The proposed approach is based on an analysis of the energy balance in the near-cathode region and considers the effects of current density, voltage, thermophysical properties of the electrolyte, and heattransfer parameters on the conditions of evaporation and vapor-gas mixture formation. Experimental studies were carried out under cathodic heating of steel 20 samples in a Na₂CO₃ solution at 100-300 V with simultaneous recording of temperature and electrical parameters. Numerical modeling of current and energy distribution in the near-cathode region was performed in COMSOL Multiphysics. Relationships between the vapor-gas envelope thickness and the discharge energy parameters were established, and it was shown that its growth is accompanied by the transition from nucleate to film boiling of the electrolyte and by an increase in the cathode heating intensity. The obtained results can be used for selecting electrolytic-plasma processing regimes and for modeling thermal processes in the near-cathode zone.

1. Low-temperature plasma electrolysis: Theory and practice / A.V. Kravchenko et al. – Moscow, Dnepropetrovsk: Accent PP LLC. – 2013.

2. Sinkevich, Yu.A. Modern concepts of the mechanism of electrical conductivity of the vapor-gas envelope under conditions of electrolytic anodic treatment. – 2015.

3. Electrophysical and electrochemical processing methods / Z.I. Polyakov et al. Chelyabinsk: South Ural State University. – 2006.

4. Babenko V.P. Linear voltage and current regulators / V.P. Babenko, V.K. Bityukov. – 2018.

5. Levin O.V. Experimental investigation and modeling of electrode processes in films of conducting and redox polymers. Doctoral dissertation, St. Petersburg State University. – O.V. Levin. – 2017.

6. Diskaeva E.N. Investigation of near-electrode layer properties of magnetic fluid by ellipsometric and electrophysical measurements. Doctoral dissertation. – E.N. Diskaeva. – 2006.

7. Khokhryakov E.V. Physicochemical regularities of formation of multicomponent functional coatings in the microplasma mode. Doctoral dissertation, Tomsk State University. – E.V. Khokhryakov. – 2004.

8. Kaputkin D.E. Uskorennoe diffuzionnoe nasyshchenie poverkhnosti metallov pri ehlektrokhimiko-termicheskoi obrabotke / D.E. Kaputkin, V.N. Duradzhi, N.A. Kaputkina // Fizika i khimiya obrabotki materialov. – 2020. – № 2. – S. 48-57. http://elibrary.ru/item.asp?id=43102169. (In Russian).

9. Kaputkin D.E. Accelerated Diffusion Saturation of the Metal Surface during Electrochemical Heat Treatment / D.E. Kaputkin, V.N. Duradji, N.A. Kaputkina // Inorganic Materials: Applied Research. – 2025. – Т. 16, № 3. – Р. 737-743. http://elibrary.ru/item.asp?id=82621223.

10. Kaputkin D.E. Reasons for the acceleration of the saturation of the metal surface during electrothermochemical treatment / D.E. Kaputkin, V.N. Duradji // V knige: Perspektivnye napravleniya issledovanii v nauke i tekhnologiyakh. – 2021. – Р. 101-120. http://elibrary.ru/item.asp?id=46679287. (In Russian).